All of lore.kernel.org
 help / color / mirror / Atom feed
From: allen <allen.chen@ite.com.tw>
To: unlisted-recipients:; (no To-header on input)
Cc: Allen Chen <allen.chen@ite.com.tw>,
	Pi-Hsun Shih <pihsun@chromium.org>,
	Jau-Chih Tseng <Jau-Chih.Tseng@ite.com.tw>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Maxime Ripard <mripard@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>, Shawn Guo <shawnguo@kernel.org>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Icenowy Zheng <icenowy@aosc.io>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	"open list:DRM DRIVERS" <dri-devel@lists.freedesktop.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>,
	"moderated list:ARM/Mediatek SoC support" 
	<linux-arm-kernel@lists.infradead.org>,
	"moderated list:ARM/Mediatek SoC support" 
	<linux-mediatek@lists.infradead.org>
Subject: [PATCH v3 1/2] dt-bindings: Add binding for IT6505.
Date: Thu, 12 Sep 2019 11:32:28 +0800	[thread overview]
Message-ID: <1568259199-5827-2-git-send-email-allen.chen@ite.com.tw> (raw)
In-Reply-To: <1568259199-5827-1-git-send-email-allen.chen@ite.com.tw>

From: Allen Chen <allen.chen@ite.com.tw>

Add a DT binding documentation for IT6505.

Signed-off-by: Allen Chen <allen.chen@ite.com.tw>

Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>

---
cros-ec does not have an associated driver that uses the standard Linux USB-C driver class.
extcon is used to model the Type-C connector.(crbug.com/982932)
---
 .../bindings/display/bridge/ite,it6505.txt         | 28 ++++++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml       |  2 ++
 2 files changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6505.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
new file mode 100644
index 0000000..72da0c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
@@ -0,0 +1,28 @@
+iTE it6505 DP bridge bindings
+
+Required properties:
+        - compatible: "ite,it6505"
+        - reg: i2c address of the bridge
+        - ovdd-supply: I/O voltage
+        - pwr18-supply: Core voltage
+        - interrupts: interrupt specifier of INT pin
+        - reset-gpios: gpio specifier of RESET pin
+	- hpd-gpios:
+		Hotplug detect GPIO.
+		Indicates which GPIO should be used for hotplug detection
+	- port@[x]: SoC specific port nodes with endpoint definitions as defined
+		in Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+
+Example:
+	dp-bridge@5c {
+                compatible = "ite,it6505";
+                interrupts = <152 IRQ_TYPE_EDGE_RISING 152 0>;
+                reg = <0x5c>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&it6505_pins>;
+                ovdd-supply = <&mt6358_vsim1_reg>;
+                pwr18-supply = <&it6505_pp18_reg>;
+                reset-gpios = <&pio 179 1>;
+                hpd-gpios = <&pio 9 0>;
+                extcon = <&usbc_extcon>;
+        };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 967e78c..fb3b643 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -461,6 +461,8 @@ patternProperties:
     description: Intersil
   "^issi,.*":
     description: Integrated Silicon Solutions Inc.
+  "^ite,.*":
+    description: ITE Tech. Inc.
   "^itead,.*":
     description: ITEAD Intelligent Systems Co.Ltd
   "^iwave,.*":
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: allen <allen.chen@ite.com.tw>
Cc: Allen Chen <allen.chen@ite.com.tw>,
	Pi-Hsun Shih <pihsun@chromium.org>,
	Jau-Chih Tseng <Jau-Chih.Tseng@ite.com.tw>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Maxime Ripard <mripard@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>, Shawn Guo <shawnguo@kernel.org>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Icenowy Zheng <icenowy@aosc.io>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	"open list:DRM DRIVERS" <dri-devel@lists.freedesktop.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>,
	moderated list:ARM/Mediatek SoC
Subject: [PATCH v3 1/2] dt-bindings: Add binding for IT6505.
Date: Thu, 12 Sep 2019 11:32:28 +0800	[thread overview]
Message-ID: <1568259199-5827-2-git-send-email-allen.chen@ite.com.tw> (raw)
In-Reply-To: <1568259199-5827-1-git-send-email-allen.chen@ite.com.tw>

From: Allen Chen <allen.chen@ite.com.tw>

Add a DT binding documentation for IT6505.

Signed-off-by: Allen Chen <allen.chen@ite.com.tw>

Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>

---
cros-ec does not have an associated driver that uses the standard Linux USB-C driver class.
extcon is used to model the Type-C connector.(crbug.com/982932)
---
 .../bindings/display/bridge/ite,it6505.txt         | 28 ++++++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml       |  2 ++
 2 files changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6505.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
new file mode 100644
index 0000000..72da0c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
@@ -0,0 +1,28 @@
+iTE it6505 DP bridge bindings
+
+Required properties:
+        - compatible: "ite,it6505"
+        - reg: i2c address of the bridge
+        - ovdd-supply: I/O voltage
+        - pwr18-supply: Core voltage
+        - interrupts: interrupt specifier of INT pin
+        - reset-gpios: gpio specifier of RESET pin
+	- hpd-gpios:
+		Hotplug detect GPIO.
+		Indicates which GPIO should be used for hotplug detection
+	- port@[x]: SoC specific port nodes with endpoint definitions as defined
+		in Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+
+Example:
+	dp-bridge@5c {
+                compatible = "ite,it6505";
+                interrupts = <152 IRQ_TYPE_EDGE_RISING 152 0>;
+                reg = <0x5c>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&it6505_pins>;
+                ovdd-supply = <&mt6358_vsim1_reg>;
+                pwr18-supply = <&it6505_pp18_reg>;
+                reset-gpios = <&pio 179 1>;
+                hpd-gpios = <&pio 9 0>;
+                extcon = <&usbc_extcon>;
+        };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 967e78c..fb3b643 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -461,6 +461,8 @@ patternProperties:
     description: Intersil
   "^issi,.*":
     description: Integrated Silicon Solutions Inc.
+  "^ite,.*":
+    description: ITE Tech. Inc.
   "^itead,.*":
     description: ITEAD Intelligent Systems Co.Ltd
   "^iwave,.*":
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: allen <allen.chen@ite.com.tw>
Cc: Mark Rutland <mark.rutland@arm.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>, Pi-Hsun Shih <pihsun@chromium.org>,
	Jau-Chih Tseng <Jau-Chih.Tseng@ite.com.tw>,
	David Airlie <airlied@linux.ie>,
	Allen Chen <allen.chen@ite.com.tw>,
	"open list:DRM DRIVERS" <dri-devel@lists.freedesktop.org>,
	open list <linux-kernel@vger.kernel.org>,
	Maxime Ripard <mripard@kernel.org>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Rob Herring <robh+dt@kernel.org>,
	"moderated list:ARM/Mediatek SoC support"
	<linux-mediatek@lists.infradead.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Daniel Vetter <daniel@ffwll.ch>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Icenowy Zheng <icenowy@aosc.io>, Shawn Guo <shawnguo@kernel.org>,
	"moderated list:ARM/Mediatek SoC support"
	<linux-arm-kernel@lists.infradead.org>,
	Heiko Stuebner <heiko@sntech.de>
Subject: [PATCH v3 1/2] dt-bindings: Add binding for IT6505.
Date: Thu, 12 Sep 2019 11:32:28 +0800	[thread overview]
Message-ID: <1568259199-5827-2-git-send-email-allen.chen@ite.com.tw> (raw)
In-Reply-To: <1568259199-5827-1-git-send-email-allen.chen@ite.com.tw>

From: Allen Chen <allen.chen@ite.com.tw>

Add a DT binding documentation for IT6505.

Signed-off-by: Allen Chen <allen.chen@ite.com.tw>

Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>

---
cros-ec does not have an associated driver that uses the standard Linux USB-C driver class.
extcon is used to model the Type-C connector.(crbug.com/982932)
---
 .../bindings/display/bridge/ite,it6505.txt         | 28 ++++++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml       |  2 ++
 2 files changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6505.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
new file mode 100644
index 0000000..72da0c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
@@ -0,0 +1,28 @@
+iTE it6505 DP bridge bindings
+
+Required properties:
+        - compatible: "ite,it6505"
+        - reg: i2c address of the bridge
+        - ovdd-supply: I/O voltage
+        - pwr18-supply: Core voltage
+        - interrupts: interrupt specifier of INT pin
+        - reset-gpios: gpio specifier of RESET pin
+	- hpd-gpios:
+		Hotplug detect GPIO.
+		Indicates which GPIO should be used for hotplug detection
+	- port@[x]: SoC specific port nodes with endpoint definitions as defined
+		in Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+
+Example:
+	dp-bridge@5c {
+                compatible = "ite,it6505";
+                interrupts = <152 IRQ_TYPE_EDGE_RISING 152 0>;
+                reg = <0x5c>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&it6505_pins>;
+                ovdd-supply = <&mt6358_vsim1_reg>;
+                pwr18-supply = <&it6505_pp18_reg>;
+                reset-gpios = <&pio 179 1>;
+                hpd-gpios = <&pio 9 0>;
+                extcon = <&usbc_extcon>;
+        };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 967e78c..fb3b643 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -461,6 +461,8 @@ patternProperties:
     description: Intersil
   "^issi,.*":
     description: Integrated Silicon Solutions Inc.
+  "^ite,.*":
+    description: ITE Tech. Inc.
   "^itead,.*":
     description: ITEAD Intelligent Systems Co.Ltd
   "^iwave,.*":
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-09-12  3:35 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-12  3:32 [PATCH v3 0/2] IT6505 cover letter allen
2019-09-12  3:32 ` allen
2019-09-12  3:32 ` allen
2019-09-12  3:32 ` allen [this message]
2019-09-12  3:32   ` [PATCH v3 1/2] dt-bindings: Add binding for IT6505 allen
2019-09-12  3:32   ` allen
2019-09-17 19:54   ` Rob Herring
2019-09-12  3:32 ` [PATCH v3 2/2] drm/bridge: add it6505 driver allen
2019-09-12  3:32   ` allen
2019-09-12  3:32   ` allen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1568259199-5827-2-git-send-email-allen.chen@ite.com.tw \
    --to=allen.chen@ite.com.tw \
    --cc=Jau-Chih.Tseng@ite.com.tw \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=heiko@sntech.de \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=icenowy@aosc.io \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=mripard@kernel.org \
    --cc=pihsun@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.