From: Dong Aisheng <aisheng.dong@nxp.com> To: linux-arm-kernel@lists.infradead.org Cc: Dong Aisheng <aisheng.dong@nxp.com>, devicetree@vger.kernel.org, dongas86@gmail.com, catalin.marinas@arm.com, will.deacon@arm.com, oliver.graute@gmail.com, robh+dt@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de, fabio.estevam@nxp.com, Mark Rutland <mark.rutland@arm.com>, shawnguo@kernel.org Subject: [PATCH V3 13/15] arm64: dts: imx: add imx8qm common dts file Date: Thu, 12 Sep 2019 23:30:50 +0800 [thread overview] Message-ID: <1568302252-28066-14-git-send-email-aisheng.dong@nxp.com> (raw) In-Reply-To: <1568302252-28066-1-git-send-email-aisheng.dong@nxp.com> The i.MX8QuadMax is a Dual (2x) Cortex-A72 and Quad (4x) Cortex-A53 proccessor with powerful graphic and multimedia features. It uses the same architecture as MX8QXP, so many SS can be reused. This patch adds i.MX8QuadMax SoC dtsi file. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- ChangeLog: v2->v3: * remove a typo change on imx8qxp.dtsi which is unrelated to this patch * include new imx8-lpcg.h v1->v2: * change to the new two cell scu clk binding --- arch/arm64/boot/dts/freescale/imx8qm.dtsi | 180 ++++++++++++++++++++++++++++++ 1 file changed, 180 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi new file mode 100644 index 0000000..87a4c3e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pads-imx8qm.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &lpuart0; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + + cluster1 { + core0 { + cpu = <&A72_0>; + }; + core1 { + cpu = <&A72_1>; + }; + }; + }; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A72_0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + }; + + A72_1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + + A72_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xC0000>, /* GICR */ + <0x0 0x52000000 0 0x2000>, /* GICC */ + <0x0 0x52010000 0 0x1000>, /* GICH */ + <0x0 0x52020000 0 0x20000>; /* GICV */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ + }; + + scu { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", "tx1", "tx2", "tx3", + "rx0", "rx1", "rx2", "rx3"; + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 0 1 + &lsio_mu1 0 2 + &lsio_mu1 0 3 + &lsio_mu1 1 0 + &lsio_mu1 1 1 + &lsio_mu1 1 2 + &lsio_mu1 1 3>; + + pd: imx8qx-pd { + compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; + + clk: clock-controller { + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; + #clock-cells = <2>; + }; + + iomuxc: pinctrl { + compatible = "fsl,imx8qm-iomuxc"; + }; + + }; + + /* sorted in register address */ + #include "imx8-ss-dma.dtsi" + #include "imx8-ss-conn.dtsi" + #include "imx8-ss-lsio.dtsi" +}; + +#include "imx8qm-ss-dma.dtsi" +#include "imx8qm-ss-conn.dtsi" +#include "imx8qm-ss-lsio.dtsi" -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Dong Aisheng <aisheng.dong@nxp.com> To: linux-arm-kernel@lists.infradead.org Cc: Dong Aisheng <aisheng.dong@nxp.com>, devicetree@vger.kernel.org, dongas86@gmail.com, catalin.marinas@arm.com, will.deacon@arm.com, oliver.graute@gmail.com, robh+dt@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de, fabio.estevam@nxp.com, Mark Rutland <mark.rutland@arm.com>, shawnguo@kernel.org Subject: [PATCH V3 13/15] arm64: dts: imx: add imx8qm common dts file Date: Thu, 12 Sep 2019 23:30:50 +0800 [thread overview] Message-ID: <1568302252-28066-14-git-send-email-aisheng.dong@nxp.com> (raw) In-Reply-To: <1568302252-28066-1-git-send-email-aisheng.dong@nxp.com> The i.MX8QuadMax is a Dual (2x) Cortex-A72 and Quad (4x) Cortex-A53 proccessor with powerful graphic and multimedia features. It uses the same architecture as MX8QXP, so many SS can be reused. This patch adds i.MX8QuadMax SoC dtsi file. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Oliver Graute <oliver.graute@kococonnector.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- ChangeLog: v2->v3: * remove a typo change on imx8qxp.dtsi which is unrelated to this patch * include new imx8-lpcg.h v1->v2: * change to the new two cell scu clk binding --- arch/arm64/boot/dts/freescale/imx8qm.dtsi | 180 ++++++++++++++++++++++++++++++ 1 file changed, 180 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi new file mode 100644 index 0000000..87a4c3e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pads-imx8qm.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &lpuart0; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + + cluster1 { + core0 { + cpu = <&A72_0>; + }; + core1 { + cpu = <&A72_1>; + }; + }; + }; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A72_0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + }; + + A72_1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + + A72_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xC0000>, /* GICR */ + <0x0 0x52000000 0 0x2000>, /* GICC */ + <0x0 0x52010000 0 0x1000>, /* GICH */ + <0x0 0x52020000 0 0x20000>; /* GICV */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ + }; + + scu { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", "tx1", "tx2", "tx3", + "rx0", "rx1", "rx2", "rx3"; + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 0 1 + &lsio_mu1 0 2 + &lsio_mu1 0 3 + &lsio_mu1 1 0 + &lsio_mu1 1 1 + &lsio_mu1 1 2 + &lsio_mu1 1 3>; + + pd: imx8qx-pd { + compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; + + clk: clock-controller { + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; + #clock-cells = <2>; + }; + + iomuxc: pinctrl { + compatible = "fsl,imx8qm-iomuxc"; + }; + + }; + + /* sorted in register address */ + #include "imx8-ss-dma.dtsi" + #include "imx8-ss-conn.dtsi" + #include "imx8-ss-lsio.dtsi" +}; + +#include "imx8qm-ss-dma.dtsi" +#include "imx8qm-ss-conn.dtsi" +#include "imx8qm-ss-lsio.dtsi" -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-09-12 15:30 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-09-12 15:30 [PATCH V3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 01/15] arm64: dts: imx8qxp: add fallback compatible string for scu pd Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 02/15] arm64: dts: imx8qxp: move scu pd node before scu clock node Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 03/15] arm64: dts: imx8qxp: orginize dts in subsystems Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 04/15] arm64: dts: imx8: add lsio lpcg clocks Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 05/15] arm64: dts: imx8: add conn " Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 06/15] arm64: dts: imx8: add adma " Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 07/15] arm64: dts: imx8: switch to two cell scu clock binding Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 08/15] arm64: dts: imx8: switch to new lpcg " Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 09/15] arm64: dts: imx8qm: add lsio ss support Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 10/15] arm64: dts: imx8qm: add conn " Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 11/15] arm64: dts: imx8: split adma ss into dma and audio ss Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 12/15] arm64: dts: imx8qm: add dma ss support Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng [this message] 2019-09-12 15:30 ` [PATCH V3 13/15] arm64: dts: imx: add imx8qm common dts file Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 14/15] arm64: dts: imx: add imx8qm mek support Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-12 15:30 ` [PATCH V3 15/15] arm64: defconfig: " Dong Aisheng 2019-09-12 15:30 ` Dong Aisheng 2019-09-13 12:16 ` [PATCH V3 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support Oliver Graute 2019-09-13 12:16 ` Oliver Graute 2019-09-13 16:43 ` Aisheng Dong 2019-09-13 16:43 ` Aisheng Dong 2019-09-16 11:22 ` Oliver Graute 2019-09-16 11:22 ` Oliver Graute
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1568302252-28066-14-git-send-email-aisheng.dong@nxp.com \ --to=aisheng.dong@nxp.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=dongas86@gmail.com \ --cc=fabio.estevam@nxp.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=mark.rutland@arm.com \ --cc=oliver.graute@gmail.com \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=will.deacon@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.