From: fabrizio.castro@bp.renesas.com (Fabrizio Castro)
To: cip-dev@lists.cip-project.org
Subject: [cip-dev] [PATCH 4.19.y-cip v2 00/32] Add PCIe and HDMI support to HiHope RZ/G2M
Date: Tue, 17 Sep 2019 14:07:28 +0100 [thread overview]
Message-ID: <1568725680-32730-1-git-send-email-fabrizio.castro@bp.renesas.com> (raw)
Dear All,
this series adds HDMI and PCIe support for the HiHope RZ/G2M board.
v1->v2:
* Rebased on top of latest linux-4.19.y-cip branch
Thanks,
Fab
Biju Das (14):
dt-bindings: PCI: rcar: Add device tree support for r8a774a1
dt-bindings: display: renesas: du: Document the r8a774a1 bindings
dt-bindings: display: renesas: lvds: Document r8a774a1 bindings
drm: rcar-du: Add R8A774A1 support
drm: rcar-du: lvds: Add r8a774a1 support
arm64: dts: renesas: r8a774a1: Add PCIe device nodes
arm64: dts: renesas: hihope-common: Declare pcie bus clock
arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support
arm64: dts: renesas: r8a774a1: Add VSP instances
arm64: dts: renesas: r8a774a1: Add DU device to DT
arm64: dts: renesas: r8a774a1: Add FDP1 instance
arm64: dts: renesas: r8a774a1: Tie SYS-DMAC to IPMMU-DS0/1
arm64: dts: renesas: r8a774a1: Tie Audio-DMAC to IPMMU-MP
arm64: dts: renesas: r8a774a1: Connect Ethernet-AVB to IPMMU-DS0
Fabrizio Castro (3):
dt-bindings: display: renesas: Add r8a774a1 support
arm64: dts: renesas: r8a774a1: Add HDMI encoder instance
arm64: dts: renesas: hihope-common: Add HDMI support
Jacopo Mondi (1):
drm: rcar-du: Rename and document dpll_ch field
Kieran Bingham (3):
drm: rcar-du: Refactor Feature and Quirk definitions
drm: rcar-du: Add interlaced feature flag
drm: rcar-du: Support interlaced video output through vsp1
Koji Matsuoka (1):
drm: rcar-du: Add support for missing pixel formats
Laurent Pinchart (6):
drm: rcar-du: dw-hdmi: Reject modes with a too high clock frequency
drm: rcar-du: Cache DSYSR value to ensure known initial value
drm: rcar-du: Don't use TV sync mode when not supported by the
hardware
drm: rcar-du: Rework clock configuration based on hardware limits
drm: rcar-du: Store V4L2 fourcc in rcar_du_format_info structure
drm: rcar-du: Update framebuffer pitch and alignment limits for Gen3
Marek Vasut (3):
PCI: rcar: Replace unsigned long with u32/unsigned int in register
accessors
PCI: rcar: Replace various variable types with unsigned ones for
register values
PCI: rcar: Clean up debug messages
Wolfram Sang (1):
PCI: rcar: Do not shadow the 'irq' variable
.../bindings/display/bridge/renesas,dw-hdmi.txt | 4 +-
.../bindings/display/bridge/renesas,lvds.txt | 1 +
.../devicetree/bindings/display/renesas,du.txt | 2 +
Documentation/devicetree/bindings/pci/rcar-pci.txt | 1 +
arch/arm64/boot/dts/renesas/hihope-common.dtsi | 65 ++++++
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 8 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 255 +++++++++++++++++++++
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 168 ++++++++------
drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 5 +
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 79 +++++--
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 13 +-
drivers/gpu/drm/rcar-du/rcar_du_group.c | 7 +-
drivers/gpu/drm/rcar-du/rcar_du_kms.c | 92 +++++++-
drivers/gpu/drm/rcar-du/rcar_du_kms.h | 1 +
drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 46 +---
drivers/gpu/drm/rcar-du/rcar_dw_hdmi.c | 15 ++
drivers/gpu/drm/rcar-du/rcar_lvds.c | 1 +
drivers/pci/controller/pcie-rcar.c | 40 ++--
18 files changed, 641 insertions(+), 162 deletions(-)
--
2.7.4
next reply other threads:[~2019-09-17 13:07 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 13:07 Fabrizio Castro [this message]
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 01/32] dt-bindings: PCI: rcar: Add device tree support for r8a774a1 Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 02/32] dt-bindings: display: renesas: du: Document the r8a774a1 bindings Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 03/32] dt-bindings: display: renesas: lvds: Document " Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 04/32] dt-bindings: display: renesas: Add r8a774a1 support Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 05/32] PCI: rcar: Replace unsigned long with u32/unsigned int in register accessors Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 06/32] PCI: rcar: Replace various variable types with unsigned ones for register values Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 07/32] PCI: rcar: Clean up debug messages Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 08/32] PCI: rcar: Do not shadow the 'irq' variable Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 09/32] drm: rcar-du: Add R8A774A1 support Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 10/32] drm: rcar-du: lvds: Add r8a774a1 support Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 11/32] drm: rcar-du: dw-hdmi: Reject modes with a too high clock frequency Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 12/32] drm: rcar-du: Refactor Feature and Quirk definitions Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 13/32] drm: rcar-du: Add interlaced feature flag Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 14/32] drm: rcar-du: Cache DSYSR value to ensure known initial value Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 15/32] drm: rcar-du: Don't use TV sync mode when not supported by the hardware Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 16/32] drm: rcar-du: Support interlaced video output through vsp1 Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 17/32] drm: rcar-du: Rework clock configuration based on hardware limits Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 18/32] drm: rcar-du: Rename and document dpll_ch field Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 19/32] drm: rcar-du: Add support for missing pixel formats Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 20/32] drm: rcar-du: Store V4L2 fourcc in rcar_du_format_info structure Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 21/32] drm: rcar-du: Update framebuffer pitch and alignment limits for Gen3 Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 22/32] arm64: dts: renesas: r8a774a1: Add PCIe device nodes Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 23/32] arm64: dts: renesas: hihope-common: Declare pcie bus clock Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 24/32] arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 25/32] arm64: dts: renesas: r8a774a1: Add VSP instances Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 26/32] arm64: dts: renesas: r8a774a1: Add DU device to DT Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 27/32] arm64: dts: renesas: r8a774a1: Add FDP1 instance Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 28/32] arm64: dts: renesas: r8a774a1: Tie SYS-DMAC to IPMMU-DS0/1 Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 29/32] arm64: dts: renesas: r8a774a1: Tie Audio-DMAC to IPMMU-MP Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 30/32] arm64: dts: renesas: r8a774a1: Connect Ethernet-AVB to IPMMU-DS0 Fabrizio Castro
2019-09-17 13:07 ` [cip-dev] [PATCH 4.19.y-cip v2 31/32] arm64: dts: renesas: r8a774a1: Add HDMI encoder instance Fabrizio Castro
2019-09-17 13:08 ` [cip-dev] [PATCH 4.19.y-cip v2 32/32] arm64: dts: renesas: hihope-common: Add HDMI support Fabrizio Castro
2019-09-17 13:57 ` [cip-dev] [PATCH 4.19.y-cip v2 00/32] Add PCIe and HDMI support to HiHope RZ/G2M nobuhiro1.iwamatsu at toshiba.co.jp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1568725680-32730-1-git-send-email-fabrizio.castro@bp.renesas.com \
--to=fabrizio.castro@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.