From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Fabio Estevam <festevam@gmail.com>,
Andrew Smirnov <andrew.smirnov@gmail.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
linux-imx@nxp.com, Stefan Riedmueller <s.riedmueller@phytec.de>
Subject: [PATCH v2 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings
Date: Fri, 20 Sep 2019 13:52:26 +0200 [thread overview]
Message-ID: <1568980346-385840-2-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1568980346-385840-1-git-send-email-s.riedmueller@phytec.de>
Add devicetree bindings for i.MX6 based phyCORE-i.MX6, phyBOARD-Mira and
phyFLEX-i.MX6.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
Changes in v2:
- Use seperate description for each board instead of squashing them into
the standard board.
---
Documentation/devicetree/bindings/arm/fsl.yaml | 37 ++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index c926ff6eac67..7dbb45cebb86 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -116,6 +116,21 @@ properties:
- technologic,imx6q-ts7970
- const: fsl,imx6q
+ - description: i.MX6Q PHYTEC phyBOARD-Mira
+ items:
+ - enum:
+ - phytec,imx6q-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+ - phytec,imx6q-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+ - const: phytec,imx6q-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6q
+
+ - description: i.MX6Q PHYTEC phyFLEX-i.MX6
+ items:
+ - const: phytec,imx6q-pbab01 # PHYTEC phyFLEX carrier board
+ - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
+ - const: fsl,imx6q
+
- description: i.MX6QP based Boards
items:
- enum:
@@ -123,6 +138,13 @@ properties:
- fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
- const: fsl,imx6qp
+ - description: i.MX6QP PHYTEC phyBOARD-Mira
+ items:
+ - const: phytec,imx6qp-pbac06-nand
+ - const: phytec,imx6qp-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6qp
+
- description: i.MX6DL based Boards
items:
- enum:
@@ -138,6 +160,21 @@ properties:
- ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board
- const: fsl,imx6dl
+ - description: i.MX6DL PHYTEC phyBOARD-Mira
+ items:
+ - enum:
+ - phytec,imx6dl-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+ - phytec,imx6dl-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+ - const: phytec,imx6dl-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6dl
+
+ - description: i.MX6DL PHYTEC phyFLEX-i.MX6
+ items:
+ - const: phytec,imx6dl-pbab01 # PHYTEC phyFLEX carrier board
+ - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
+ - const: fsl,imx6dl
+
- description: i.MX6SL based Boards
items:
- enum:
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
Stefan Riedmueller <s.riedmueller@phytec.de>,
Andrew Smirnov <andrew.smirnov@gmail.com>,
Fabio Estevam <festevam@gmail.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-imx@nxp.com,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v2 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings
Date: Fri, 20 Sep 2019 13:52:26 +0200 [thread overview]
Message-ID: <1568980346-385840-2-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1568980346-385840-1-git-send-email-s.riedmueller@phytec.de>
Add devicetree bindings for i.MX6 based phyCORE-i.MX6, phyBOARD-Mira and
phyFLEX-i.MX6.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
Changes in v2:
- Use seperate description for each board instead of squashing them into
the standard board.
---
Documentation/devicetree/bindings/arm/fsl.yaml | 37 ++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index c926ff6eac67..7dbb45cebb86 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -116,6 +116,21 @@ properties:
- technologic,imx6q-ts7970
- const: fsl,imx6q
+ - description: i.MX6Q PHYTEC phyBOARD-Mira
+ items:
+ - enum:
+ - phytec,imx6q-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+ - phytec,imx6q-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+ - const: phytec,imx6q-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6q
+
+ - description: i.MX6Q PHYTEC phyFLEX-i.MX6
+ items:
+ - const: phytec,imx6q-pbab01 # PHYTEC phyFLEX carrier board
+ - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
+ - const: fsl,imx6q
+
- description: i.MX6QP based Boards
items:
- enum:
@@ -123,6 +138,13 @@ properties:
- fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
- const: fsl,imx6qp
+ - description: i.MX6QP PHYTEC phyBOARD-Mira
+ items:
+ - const: phytec,imx6qp-pbac06-nand
+ - const: phytec,imx6qp-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6qp
+
- description: i.MX6DL based Boards
items:
- enum:
@@ -138,6 +160,21 @@ properties:
- ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board
- const: fsl,imx6dl
+ - description: i.MX6DL PHYTEC phyBOARD-Mira
+ items:
+ - enum:
+ - phytec,imx6dl-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+ - phytec,imx6dl-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+ - const: phytec,imx6dl-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6dl
+
+ - description: i.MX6DL PHYTEC phyFLEX-i.MX6
+ items:
+ - const: phytec,imx6dl-pbab01 # PHYTEC phyFLEX carrier board
+ - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
+ - const: fsl,imx6dl
+
- description: i.MX6SL based Boards
items:
- enum:
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-09-20 11:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-20 11:52 [PATCH v2 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings Stefan Riedmueller
2019-09-20 11:52 ` Stefan Riedmueller
2019-09-20 11:52 ` Stefan Riedmueller [this message]
2019-09-20 11:52 ` [PATCH v2 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 " Stefan Riedmueller
2019-10-01 22:18 ` Rob Herring
2019-10-01 22:18 ` Rob Herring
2019-10-01 22:18 ` Rob Herring
2019-10-01 22:18 ` [PATCH v2 1/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL " Rob Herring
2019-10-01 22:18 ` Rob Herring
2019-10-01 22:18 ` Rob Herring
2019-12-09 13:33 ` Stefan Riedmüller
2019-12-09 13:33 ` Stefan Riedmüller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1568980346-385840-2-git-send-email-s.riedmueller@phytec.de \
--to=s.riedmueller@phytec.de \
--cc=andrew.smirnov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.