From: Stefan Wahren <wahrenst@gmx.net>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: Stefan Wahren <wahrenst@gmx.net>, Eric Anholt <eric@anholt.net>,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 1/3] bcm2835-dt-next-2019-10-15
Date: Tue, 15 Oct 2019 19:15:23 +0200 [thread overview]
Message-ID: <1571159725-5090-1-git-send-email-wahrenst@gmx.net> (raw)
Hi Florian,
The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:
Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)
are available in the git repository at:
git://github.com/anholt/linux tags/bcm2835-dt-next-2019-10-15
for you to fetch changes up to 46fdee06aeefedfc62a4c33b2c4a7a74682ac755:
arm64: dts: broadcom: Add reference to RPi 4 B (2019-10-10 19:14:28 +0200)
----------------------------------------------------------------
This pull request introduce initial Raspberry Pi 4 support. But all the fancy
stuff like GENET, PCIe, xHCI, 40 bit DMA and V3D is missing.
----------------------------------------------------------------
Stefan Wahren (7):
ARM: dts: bcm283x: Remove simple-bus from fixed clocks
ARM: dts: bcm283x: Remove brcm,bcm2835-pl011 compatible
ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi
dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema
dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema
ARM: dts: Add minimal Raspberry Pi 4 support
arm64: dts: broadcom: Add reference to RPi 4 B
.../devicetree/bindings/arm/bcm/bcm2835.yaml | 54 ++
.../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 67 --
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 123 +++
arch/arm/boot/dts/bcm2711.dtsi | 844 +++++++++++++++++++++
arch/arm/boot/dts/bcm2835-common.dtsi | 194 +++++
arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 -
arch/arm/boot/dts/bcm2835.dtsi | 1 +
arch/arm/boot/dts/bcm2836.dtsi | 1 +
arch/arm/boot/dts/bcm2837.dtsi | 1 +
arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi | 7 +
arch/arm/boot/dts/bcm283x.dtsi | 190 +----
arch/arm64/boot/dts/broadcom/Makefile | 3 +-
arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 2 +
14 files changed, 1236 insertions(+), 256 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts
create mode 100644 arch/arm/boot/dts/bcm2711.dtsi
create mode 100644 arch/arm/boot/dts/bcm2835-common.dtsi
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <wahrenst@gmx.net>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-kernel@vger.kernel.org, Eric Anholt <eric@anholt.net>,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Stefan Wahren <wahrenst@gmx.net>
Subject: [GIT PULL 1/3] bcm2835-dt-next-2019-10-15
Date: Tue, 15 Oct 2019 19:15:23 +0200 [thread overview]
Message-ID: <1571159725-5090-1-git-send-email-wahrenst@gmx.net> (raw)
Hi Florian,
The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:
Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)
are available in the git repository at:
git://github.com/anholt/linux tags/bcm2835-dt-next-2019-10-15
for you to fetch changes up to 46fdee06aeefedfc62a4c33b2c4a7a74682ac755:
arm64: dts: broadcom: Add reference to RPi 4 B (2019-10-10 19:14:28 +0200)
----------------------------------------------------------------
This pull request introduce initial Raspberry Pi 4 support. But all the fancy
stuff like GENET, PCIe, xHCI, 40 bit DMA and V3D is missing.
----------------------------------------------------------------
Stefan Wahren (7):
ARM: dts: bcm283x: Remove simple-bus from fixed clocks
ARM: dts: bcm283x: Remove brcm,bcm2835-pl011 compatible
ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi
dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema
dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema
ARM: dts: Add minimal Raspberry Pi 4 support
arm64: dts: broadcom: Add reference to RPi 4 B
.../devicetree/bindings/arm/bcm/bcm2835.yaml | 54 ++
.../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 67 --
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 123 +++
arch/arm/boot/dts/bcm2711.dtsi | 844 +++++++++++++++++++++
arch/arm/boot/dts/bcm2835-common.dtsi | 194 +++++
arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 -
arch/arm/boot/dts/bcm2835.dtsi | 1 +
arch/arm/boot/dts/bcm2836.dtsi | 1 +
arch/arm/boot/dts/bcm2837.dtsi | 1 +
arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi | 7 +
arch/arm/boot/dts/bcm283x.dtsi | 190 +----
arch/arm64/boot/dts/broadcom/Makefile | 3 +-
arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 2 +
14 files changed, 1236 insertions(+), 256 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts
create mode 100644 arch/arm/boot/dts/bcm2711.dtsi
create mode 100644 arch/arm/boot/dts/bcm2835-common.dtsi
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-10-15 17:16 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-15 17:15 Stefan Wahren [this message]
2019-10-15 17:15 ` [GIT PULL 1/3] bcm2835-dt-next-2019-10-15 Stefan Wahren
2019-10-15 17:15 ` [GIT PULL 2/3] bcm2835-soc-next-2019-10-15 Stefan Wahren
2019-10-15 17:15 ` Stefan Wahren
2019-10-18 17:22 ` Florian Fainelli
2019-10-18 17:22 ` Florian Fainelli
2019-12-14 10:54 ` BUG - was: " H. Nikolaus Schaller
2019-12-14 10:54 ` H. Nikolaus Schaller
2019-12-14 12:59 ` Russell King - ARM Linux admin
2019-12-14 12:59 ` Russell King - ARM Linux admin
2019-12-14 12:59 ` Russell King - ARM Linux admin
2019-12-14 15:54 ` [Letux-kernel] " Andreas Kemnade
2019-12-14 15:54 ` Andreas Kemnade
2019-12-14 16:54 ` Stefan Wahren
2019-12-14 16:54 ` Stefan Wahren
2019-12-14 16:54 ` Stefan Wahren
2019-12-14 20:02 ` H. Nikolaus Schaller
2019-12-14 20:02 ` H. Nikolaus Schaller
2019-12-14 20:02 ` H. Nikolaus Schaller
2019-10-15 17:15 ` [GIT PULL 3/3] bcm2835-maintainers-next-2019-10-15 Stefan Wahren
2019-10-15 17:15 ` Stefan Wahren
2019-10-18 17:21 ` Florian Fainelli
2019-10-18 17:21 ` Florian Fainelli
2019-10-18 17:20 ` [GIT PULL 1/3] bcm2835-dt-next-2019-10-15 Florian Fainelli
2019-10-18 17:20 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1571159725-5090-1-git-send-email-wahrenst@gmx.net \
--to=wahrenst@gmx.net \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=eric@anholt.net \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.