[PATCH 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence

[Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>]

According to the R-Car Gen2/3 manual, "Be sure to write the initial
value (= H'80FF 0000) to MACCTLR before enabling PCIETCTLR.CFINIT."
To avoid unexpected behaviors, this patch fixes it.

Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver")
Fixes: be20bbcb0a8c ("PCI: rcar: Add the initialization of PCIe link in resume_noirq()")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/pci/controller/pcie-rcar.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index 40d8c54..d470ab8 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -91,6 +91,7 @@
 #define  LINK_SPEED_2_5GTS	(1 << 16)
 #define  LINK_SPEED_5_0GTS	(2 << 16)
 #define MACCTLR			0x011058
+#define  MACCTLR_INIT_VAL	0x80ff0000
 #define  SPEED_CHANGE		BIT(24)
 #define  SCRAMBLE_DISABLE	BIT(27)
 #define PMSR			0x01105c
@@ -613,6 +614,8 @@ static int rcar_pcie_hw_init(struct rcar_pcie *pcie)
 	if (IS_ENABLED(CONFIG_PCI_MSI))
 		rcar_pci_write_reg(pcie, 0x801f0000, PCIEMSITXR);
 
+	rcar_pci_write_reg(pcie, MACCTLR_INIT_VAL, MACCTLR);
+
 	/* Finish initialization - establish a PCI Express link */
 	rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR);
 
@@ -1235,6 +1238,7 @@ static int rcar_pcie_resume_noirq(struct device *dev)
 		return 0;
 
 	/* Re-establish the PCIe link */
+	rcar_pci_write_reg(pcie, MACCTLR_INIT_VAL, MACCTLR);
 	rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR);
 	return rcar_pcie_wait_for_dl(pcie);
 }
-- 
2.7.4