From: Kiran Gunda <kgunda@codeaurora.org> To: bjorn.andersson@linaro.org, jingoohan1@gmail.com, lee.jones@linaro.org, b.zolnierkie@samsung.com, dri-devel@lists.freedesktop.org, daniel.thompson@linaro.org, jacek.anaszewski@gmail.com, pavel@ucw.cz, robh+dt@kernel.org, mark.rutland@arm.com, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org, Kiran Gunda <kgunda@codeaurora.org> Subject: [PATCH V10 0/8] backlight: qcom-wled: Support for QCOM wled driver Date: Fri, 1 Nov 2019 11:56:56 +0530 [thread overview] Message-ID: <1572589624-6095-1-git-send-email-kgunda@codeaurora.org> (raw) This patch series renames the pm8941-wled.c driver to qcom-wled.c to add the support for multiple PMICs supported by qualcomm. This patch series supports both PM8941 and PMI8998 WLED. The PMI8998 WLED has the support to handle the OVP (over voltage protection) and the SC (short circuit protection) interrupts. It also has the auto string detection algorithm support to configure the right strings if the user specified string configuration is in-correct. These three features are added in this series for PMI8998. changes from v1: - Fixed the commit message for - backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c Changes from v2: - Fixed bjorn and other reviewer's comments - Seperated the device tree bindings - Splitted out the WLED4 changes in seperate patch - Merged OVP and auto string detection patch Changes from v3: - Added Reviewed-by/Acked-by tags - Fixed comments from Bjorn/Vinod/Rob - Splitting the "backlight: qcom-wled: Add support for WLED4 peripheral" patch to seperate the WLED3 specific restructure. Changes from v4: - Added reviewed-by/Acked-by tags - Fixed comments from Bjorn/Daniel/Pavel Changes from v5: - Fixed comments from Bjorn/Pavel Changes from v5/v6: - Fixed comments from Bjorn/Pavel on V5 series, which were missed in V6 series - Patch 1 and 2, mentioned below, from V6 series are picked by Pavel In next. Hence, dropped them in this series. https://lore.kernel.org/patchwork/patch/1132467/ https://lore.kernel.org/patchwork/patch/1132468/ Changes from v7: - Addressed comments from Daniel Thompson/Lee Jones - Patch 1 and 2, mentioned below, from V6 series are picked by Pavel In next. Hence, dropped them in this series. https://lore.kernel.org/patchwork/patch/1132467/ https://lore.kernel.org/patchwork/patch/1132468/ Changes from v8: - Addressed a comment from Daniel Thompson on patch 6 - Added Reviewed-by tag of Daniel Thompson on patch 4 - Patch 1 and 2, mentioned below, from V6 series are picked by Pavel In next. Hence, dropped them in this series. https://lore.kernel.org/patchwork/patch/1132467/ https://lore.kernel.org/patchwork/patch/1132468/ Changes from v9: - Added back the below dropped out patches to this series. https://lore.kernel.org/patchwork/patch/1132467/ https://lore.kernel.org/patchwork/patch/1132468/ - Added Reviewed-by tag of Daniel Thompson on patch 8 Kiran Gunda (8): backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c backlight: qcom-wled: restructure the qcom-wled bindings. backlight: qcom-wled: Add new properties for PMI8998. backlight: qcom-wled: Rename PM8941* to WLED3 backlight: qcom-wled: Restructure the driver for WLED3. backlight: qcom-wled: Add support for WLED4 peripheral. backlight: qcom-wled: add support for short circuit handling. backlight: qcom-wled: Add auto string detection logic .../bindings/leds/backlight/pm8941-wled.txt | 42 - .../bindings/leds/backlight/qcom-wled.txt | 154 +++ drivers/video/backlight/Kconfig | 8 +- drivers/video/backlight/Makefile | 2 +- drivers/video/backlight/pm8941-wled.c | 424 ------- drivers/video/backlight/qcom-wled.c | 1296 ++++++++++++++++++++ 6 files changed, 1455 insertions(+), 471 deletions(-) delete mode 100644 Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt create mode 100644 Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt delete mode 100644 drivers/video/backlight/pm8941-wled.c create mode 100644 drivers/video/backlight/qcom-wled.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: Kiran Gunda <kgunda@codeaurora.org> To: bjorn.andersson@linaro.org, jingoohan1@gmail.com, lee.jones@linaro.org, b.zolnierkie@samsung.com, dri-devel@lists.freedesktop.org, daniel.thompson@linaro.org, jacek.anaszewski@gmail.com, pavel@ucw.cz, robh+dt@kernel.org, mark.rutland@arm.com, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org, Kiran Gunda <kgunda@codeaurora.org> Subject: [PATCH V10 0/8] backlight: qcom-wled: Support for QCOM wled driver Date: Fri, 1 Nov 2019 11:56:56 +0530 [thread overview] Message-ID: <1572589624-6095-1-git-send-email-kgunda@codeaurora.org> (raw) Message-ID: <20191101062656.94uDO3GNutyAGnkLwBHFrIpEKEHyNgh0gh8WKe-iwlA@z> (raw) This patch series renames the pm8941-wled.c driver to qcom-wled.c to add the support for multiple PMICs supported by qualcomm. This patch series supports both PM8941 and PMI8998 WLED. The PMI8998 WLED has the support to handle the OVP (over voltage protection) and the SC (short circuit protection) interrupts. It also has the auto string detection algorithm support to configure the right strings if the user specified string configuration is in-correct. These three features are added in this series for PMI8998. changes from v1: - Fixed the commit message for - backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c Changes from v2: - Fixed bjorn and other reviewer's comments - Seperated the device tree bindings - Splitted out the WLED4 changes in seperate patch - Merged OVP and auto string detection patch Changes from v3: - Added Reviewed-by/Acked-by tags - Fixed comments from Bjorn/Vinod/Rob - Splitting the "backlight: qcom-wled: Add support for WLED4 peripheral" patch to seperate the WLED3 specific restructure. Changes from v4: - Added reviewed-by/Acked-by tags - Fixed comments from Bjorn/Daniel/Pavel Changes from v5: - Fixed comments from Bjorn/Pavel Changes from v5/v6: - Fixed comments from Bjorn/Pavel on V5 series, which were missed in V6 series - Patch 1 and 2, mentioned below, from V6 series are picked by Pavel In next. Hence, dropped them in this series. https://lore.kernel.org/patchwork/patch/1132467/ https://lore.kernel.org/patchwork/patch/1132468/ Changes from v7: - Addressed comments from Daniel Thompson/Lee Jones - Patch 1 and 2, mentioned below, from V6 series are picked by Pavel In next. Hence, dropped them in this series. https://lore.kernel.org/patchwork/patch/1132467/ https://lore.kernel.org/patchwork/patch/1132468/ Changes from v8: - Addressed a comment from Daniel Thompson on patch 6 - Added Reviewed-by tag of Daniel Thompson on patch 4 - Patch 1 and 2, mentioned below, from V6 series are picked by Pavel In next. Hence, dropped them in this series. https://lore.kernel.org/patchwork/patch/1132467/ https://lore.kernel.org/patchwork/patch/1132468/ Changes from v9: - Added back the below dropped out patches to this series. https://lore.kernel.org/patchwork/patch/1132467/ https://lore.kernel.org/patchwork/patch/1132468/ - Added Reviewed-by tag of Daniel Thompson on patch 8 Kiran Gunda (8): backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c backlight: qcom-wled: restructure the qcom-wled bindings. backlight: qcom-wled: Add new properties for PMI8998. backlight: qcom-wled: Rename PM8941* to WLED3 backlight: qcom-wled: Restructure the driver for WLED3. backlight: qcom-wled: Add support for WLED4 peripheral. backlight: qcom-wled: add support for short circuit handling. backlight: qcom-wled: Add auto string detection logic .../bindings/leds/backlight/pm8941-wled.txt | 42 - .../bindings/leds/backlight/qcom-wled.txt | 154 +++ drivers/video/backlight/Kconfig | 8 +- drivers/video/backlight/Makefile | 2 +- drivers/video/backlight/pm8941-wled.c | 424 ------- drivers/video/backlight/qcom-wled.c | 1296 ++++++++++++++++++++ 6 files changed, 1455 insertions(+), 471 deletions(-) delete mode 100644 Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt create mode 100644 Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt delete mode 100644 drivers/video/backlight/pm8941-wled.c create mode 100644 drivers/video/backlight/qcom-wled.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2019-11-01 6:27 UTC|newest] Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-01 6:26 Kiran Gunda [this message] 2019-11-01 6:26 ` [PATCH V10 0/8] backlight: qcom-wled: Support for QCOM wled driver Kiran Gunda 2019-11-01 6:26 ` [PATCH V10 1/8] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c Kiran Gunda 2019-11-01 6:38 ` Kiran Gunda 2019-11-01 6:26 ` Kiran Gunda 2019-11-11 9:24 ` Lee Jones 2019-11-11 9:24 ` Lee Jones 2019-11-01 6:26 ` [PATCH V10 2/8] backlight: qcom-wled: restructure the qcom-wled bindings Kiran Gunda 2019-11-01 6:26 ` Kiran Gunda 2019-11-11 9:24 ` Lee Jones 2019-11-11 9:24 ` Lee Jones 2019-11-01 6:26 ` [PATCH V10 3/8] backlight: qcom-wled: Add new properties for PMI8998 Kiran Gunda 2019-11-01 6:26 ` Kiran Gunda 2019-11-11 9:25 ` Lee Jones 2019-11-11 9:25 ` Lee Jones 2019-11-01 6:27 ` [PATCH V10 4/8] backlight: qcom-wled: Rename PM8941* to WLED3 Kiran Gunda 2019-11-01 6:39 ` Kiran Gunda 2019-11-01 6:27 ` Kiran Gunda 2019-11-11 9:25 ` Lee Jones 2019-11-11 9:25 ` Lee Jones 2019-11-01 6:27 ` [PATCH V10 5/8] backlight: qcom-wled: Restructure the driver for WLED3 Kiran Gunda 2019-11-01 6:39 ` Kiran Gunda 2019-11-01 6:27 ` Kiran Gunda 2019-11-11 9:25 ` Lee Jones 2019-11-11 9:25 ` Lee Jones 2019-11-11 9:25 ` Lee Jones 2019-11-01 6:27 ` [PATCH V10 6/8] backlight: qcom-wled: Add support for WLED4 peripheral Kiran Gunda 2019-11-01 6:39 ` Kiran Gunda 2019-11-01 6:27 ` Kiran Gunda 2019-11-11 9:25 ` Lee Jones 2019-11-11 9:25 ` Lee Jones 2019-11-01 6:27 ` [PATCH V10 7/8] backlight: qcom-wled: add support for short circuit handling Kiran Gunda 2019-11-01 6:39 ` Kiran Gunda 2019-11-01 6:27 ` Kiran Gunda 2019-11-11 9:25 ` Lee Jones 2019-11-11 9:25 ` Lee Jones 2019-11-01 6:27 ` [PATCH V10 8/8] backlight: qcom-wled: Add auto string detection logic Kiran Gunda 2019-11-01 6:39 ` Kiran Gunda 2019-11-01 6:27 ` Kiran Gunda 2019-11-11 9:25 ` Lee Jones 2019-11-11 9:25 ` Lee Jones
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1572589624-6095-1-git-send-email-kgunda@codeaurora.org \ --to=kgunda@codeaurora.org \ --cc=b.zolnierkie@samsung.com \ --cc=bjorn.andersson@linaro.org \ --cc=daniel.thompson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jacek.anaszewski@gmail.com \ --cc=jingoohan1@gmail.com \ --cc=lee.jones@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=pavel@ucw.cz \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.