From: Peng Fan <peng.fan@nxp.com> To: "catalin.marinas@arm.com" <catalin.marinas@arm.com>, "will@kernel.org" <will@kernel.org> Cc: "olof@lixom.net" <olof@lixom.net>, "mripard@kernel.org" <mripard@kernel.org>, "bjorn.andersson@linaro.org" <bjorn.andersson@linaro.org>, "dinguyen@kernel.org" <dinguyen@kernel.org>, "shawnguo@kernel.org" <shawnguo@kernel.org>, dl-linux-imx <linux-imx@nxp.com>, Anson Huang <anson.huang@nxp.com>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, Leonard Crestez <leonard.crestez@nxp.com>, Peng Fan <peng.fan@nxp.com> Subject: [PATCH] arm64: defconfig: Change CONFIG_AT803X_PHY from m to y Date: Mon, 4 Nov 2019 06:19:30 +0000 [thread overview] Message-ID: <1572848275-30941-1-git-send-email-peng.fan@nxp.com> (raw) From: Peng Fan <peng.fan@nxp.com> With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy will be reset. Without CONFIG_AT803X_PHY as y, board will stop booting in NFS DHCP, because phy is not ready. So mark CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs. Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm64/configs/defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c9a867ac32d4..cd778c9ea8a4 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -285,7 +285,7 @@ CONFIG_SNI_AVE=y CONFIG_SNI_NETSEC=y CONFIG_STMMAC_ETH=m CONFIG_MDIO_BUS_MUX_MMIOREG=y -CONFIG_AT803X_PHY=m +CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=m CONFIG_MARVELL_10G_PHY=m CONFIG_MESON_GXL_PHY=m -- 2.16.4
WARNING: multiple messages have this Message-ID (diff)
From: Peng Fan <peng.fan@nxp.com> To: "catalin.marinas@arm.com" <catalin.marinas@arm.com>, "will@kernel.org" <will@kernel.org> Cc: Peng Fan <peng.fan@nxp.com>, Anson Huang <anson.huang@nxp.com>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, "mripard@kernel.org" <mripard@kernel.org>, "bjorn.andersson@linaro.org" <bjorn.andersson@linaro.org>, "dinguyen@kernel.org" <dinguyen@kernel.org>, dl-linux-imx <linux-imx@nxp.com>, "olof@lixom.net" <olof@lixom.net>, Leonard Crestez <leonard.crestez@nxp.com>, "shawnguo@kernel.org" <shawnguo@kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Subject: [PATCH] arm64: defconfig: Change CONFIG_AT803X_PHY from m to y Date: Mon, 4 Nov 2019 06:19:30 +0000 [thread overview] Message-ID: <1572848275-30941-1-git-send-email-peng.fan@nxp.com> (raw) From: Peng Fan <peng.fan@nxp.com> With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy will be reset. Without CONFIG_AT803X_PHY as y, board will stop booting in NFS DHCP, because phy is not ready. So mark CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs. Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm64/configs/defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c9a867ac32d4..cd778c9ea8a4 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -285,7 +285,7 @@ CONFIG_SNI_AVE=y CONFIG_SNI_NETSEC=y CONFIG_STMMAC_ETH=m CONFIG_MDIO_BUS_MUX_MMIOREG=y -CONFIG_AT803X_PHY=m +CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=m CONFIG_MARVELL_10G_PHY=m CONFIG_MESON_GXL_PHY=m -- 2.16.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-11-04 6:19 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-04 6:19 Peng Fan [this message] 2019-11-04 6:19 ` [PATCH] arm64: defconfig: Change CONFIG_AT803X_PHY from m to y Peng Fan 2019-11-04 7:26 ` Shawn Guo 2019-11-04 7:26 ` Shawn Guo 2019-11-26 14:54 ` Oliver Graute 2019-11-26 14:54 ` Oliver Graute 2019-11-27 8:47 ` Marc Gonzalez 2019-11-27 8:47 ` Marc Gonzalez 2019-11-27 12:46 ` Oliver Graute 2019-11-27 12:46 ` Oliver Graute 2019-11-27 12:56 ` Fabio Estevam 2019-11-27 12:56 ` Fabio Estevam 2019-11-28 10:06 ` Oliver Graute 2019-11-28 10:06 ` Oliver Graute 2019-11-28 9:11 ` Marc Gonzalez 2019-11-28 9:11 ` Marc Gonzalez 2019-11-28 12:16 ` Oliver Graute 2019-11-28 12:16 ` Oliver Graute 2019-12-02 8:38 ` Shawn Guo 2019-12-02 8:38 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1572848275-30941-1-git-send-email-peng.fan@nxp.com \ --to=peng.fan@nxp.com \ --cc=anson.huang@nxp.com \ --cc=bjorn.andersson@linaro.org \ --cc=catalin.marinas@arm.com \ --cc=dinguyen@kernel.org \ --cc=leonard.crestez@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=mripard@kernel.org \ --cc=olof@lixom.net \ --cc=shawnguo@kernel.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.