All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manish Narani <manish.narani@xilinx.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
	michal.simek@xilinx.com, liviu.dudau@arm.com, treding@nvidia.com,
	chanho.min@lge.com, matthias.bgg@gmail.com, rrichter@cavium.com,
	manish.narani@xilinx.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, git@xilinx.com
Subject: [PATCH v4] arm64: zynqmp: Add ZynqMP SDHCI compatible string
Date: Thu, 21 Nov 2019 14:21:14 +0530	[thread overview]
Message-ID: <1574326274-121890-1-git-send-email-manish.narani@xilinx.com> (raw)

Add the new compatible string for ZynqMP SD Host Controller for its use
in the Arasan SDHCI driver for some of the ZynqMP specific operations.
Add required properties for the same.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
This patch depends on the below series of patches:
https://lkml.org/lkml/2019/11/20/366

Changes in v2:
	- Added clock-names for SD card clocks for getting clocks in the driver

Changes in v3:
	- Reverted "Added clock-names for SD card clocks for getting clocks in the driver"

Changes in v4:
	- Removed extra compatible property from v3
---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 9aa67340a4d8..de09ebe608e1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -493,21 +493,25 @@
 		};
 
 		sdhci0: mmc@ff160000 {
-			compatible = "arasan,sdhci-8.9a";
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 48 4>;
 			reg = <0x0 0xff160000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd0", "clk_in_sd0";
 		};
 
 		sdhci1: mmc@ff170000 {
-			compatible = "arasan,sdhci-8.9a";
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 49 4>;
 			reg = <0x0 0xff170000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd1", "clk_in_sd1";
 		};
 
 		smmu: smmu@fd800000 {
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Manish Narani <manish.narani@xilinx.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
	michal.simek@xilinx.com, liviu.dudau@arm.com, treding@nvidia.com,
	chanho.min@lge.com, matthias.bgg@gmail.com, rrichter@cavium.com,
	manish.narani@xilinx.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, git@xilinx.com
Subject: [PATCH v4] arm64: zynqmp: Add ZynqMP SDHCI compatible string
Date: Thu, 21 Nov 2019 14:21:14 +0530	[thread overview]
Message-ID: <1574326274-121890-1-git-send-email-manish.narani@xilinx.com> (raw)

Add the new compatible string for ZynqMP SD Host Controller for its use
in the Arasan SDHCI driver for some of the ZynqMP specific operations.
Add required properties for the same.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
This patch depends on the below series of patches:
https://lkml.org/lkml/2019/11/20/366

Changes in v2:
	- Added clock-names for SD card clocks for getting clocks in the driver

Changes in v3:
	- Reverted "Added clock-names for SD card clocks for getting clocks in the driver"

Changes in v4:
	- Removed extra compatible property from v3
---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 9aa67340a4d8..de09ebe608e1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -493,21 +493,25 @@
 		};
 
 		sdhci0: mmc@ff160000 {
-			compatible = "arasan,sdhci-8.9a";
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 48 4>;
 			reg = <0x0 0xff160000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd0", "clk_in_sd0";
 		};
 
 		sdhci1: mmc@ff170000 {
-			compatible = "arasan,sdhci-8.9a";
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 49 4>;
 			reg = <0x0 0xff170000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd1", "clk_in_sd1";
 		};
 
 		smmu: smmu@fd800000 {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-11-21  8:51 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-21  8:51 Manish Narani [this message]
2019-11-21  8:51 ` [PATCH v4] arm64: zynqmp: Add ZynqMP SDHCI compatible string Manish Narani
2019-11-21  9:16 ` Michal Simek
2019-11-21  9:16   ` Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1574326274-121890-1-git-send-email-manish.narani@xilinx.com \
    --to=manish.narani@xilinx.com \
    --cc=chanho.min@lge.com \
    --cc=devicetree@vger.kernel.org \
    --cc=git@xilinx.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liviu.dudau@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=michal.simek@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=rrichter@cavium.com \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.