All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zhou Yanjie <zhouyanjie@zoho.com>
To: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, robh+dt@kernel.org,
	paul.burton@mips.com, paulburton@kernel.org,
	mturquette@baylibre.com, sboyd@kernel.org, mark.rutland@arm.com,
	syq@debian.org, paul@crapouillou.net, sernia.zhou@foxmail.com,
	zhenwenjin@gmail.com
Subject: [PATCH 1/5] clk: Ingenic: Adjust code to make it compatible with X1830.
Date: Wed, 27 Nov 2019 11:32:52 +0800	[thread overview]
Message-ID: <1574825576-91028-2-git-send-email-zhouyanjie@zoho.com> (raw)
In-Reply-To: <1574825576-91028-1-git-send-email-zhouyanjie@zoho.com>

1.Adjust the PLL related code in "cgu.c" and "cgu.h" to make it
  compatible with the X1830 Soc from Ingenic.
2.Adjust the code in "jz4740-cgu.c" to be compatible with the
  new cgu code.
3.Adjust the code in "jz4725b-cgu.c" to be compatible with the
  new cgu code.
4.Adjust the code in "jz4770-cgu.c" to be compatible with the
  new cgu code.
5.Adjust the code in "jz4780-cgu.c" to be compatible with the
  new cgu code.
6.Adjust the code in "x1000-cgu.c" to be compatible with the
  new cgu code.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
 drivers/clk/ingenic/cgu.c         | 55 +++++++++++++++++++++++++++++----------
 drivers/clk/ingenic/cgu.h         | 12 ++++++++-
 drivers/clk/ingenic/jz4725b-cgu.c |  3 ++-
 drivers/clk/ingenic/jz4740-cgu.c  |  3 ++-
 drivers/clk/ingenic/jz4770-cgu.c  |  6 +++--
 drivers/clk/ingenic/jz4780-cgu.c  |  3 ++-
 drivers/clk/ingenic/x1000-cgu.c   |  6 +++--
 7 files changed, 66 insertions(+), 22 deletions(-)

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 6e96303..c3c69a8 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -84,7 +84,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	pll_info = &clk_info->pll;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->reg[1]);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 
 	m = (ctl >> pll_info->m_shift) & GENMASK(pll_info->m_bits - 1, 0);
@@ -93,8 +93,17 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	n += pll_info->n_offset;
 	od_enc = ctl >> pll_info->od_shift;
 	od_enc &= GENMASK(pll_info->od_bits - 1, 0);
-	bypass = !pll_info->no_bypass_bit &&
-		 !!(ctl & BIT(pll_info->bypass_bit));
+
+	if (pll_info->version >= CGU_X1830) {
+		spin_lock_irqsave(&cgu->lock, flags);
+		ctl = readl(cgu->base + pll_info->reg[0]);
+		spin_unlock_irqrestore(&cgu->lock, flags);
+
+		bypass = !pll_info->no_bypass_bit &&
+			 !!(ctl & BIT(pll_info->bypass_bit));
+	} else
+		bypass = !pll_info->no_bypass_bit &&
+			 !!(ctl & BIT(pll_info->bypass_bit));
 
 	if (bypass)
 		return parent_rate;
@@ -106,7 +115,10 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	BUG_ON(od == pll_info->od_max);
 	od++;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	if (pll_info->version >= CGU_X1830)
+		return div_u64((u64)parent_rate * m * 2, n * od);
+	else
+		return div_u64((u64)parent_rate * m, n * od);
 }
 
 static unsigned long
@@ -139,7 +151,10 @@ ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
 	if (pod)
 		*pod = od;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	if (pll_info->version >= CGU_X1830)
+		return div_u64((u64)parent_rate * m * 2, n * od);
+	else
+		return div_u64((u64)parent_rate * m, n * od);
 }
 
 static inline const struct ingenic_cgu_clk_info *to_clk_info(
@@ -183,7 +198,7 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 			clk_info->name, req_rate, rate);
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->reg[1]);
 
 	ctl &= ~(GENMASK(pll_info->m_bits - 1, 0) << pll_info->m_shift);
 	ctl |= (m - pll_info->m_offset) << pll_info->m_shift;
@@ -194,7 +209,7 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
 	ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->reg[1]);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 
 	return 0;
@@ -212,16 +227,28 @@ static int ingenic_pll_enable(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
 
-	ctl &= ~BIT(pll_info->bypass_bit);
+	if (pll_info->version >= CGU_X1830) {
+		ctl = readl(cgu->base + pll_info->reg[0]);
+
+		ctl &= ~BIT(pll_info->bypass_bit);
+
+		writel(ctl, cgu->base + pll_info->reg[0]);
+
+		ctl = readl(cgu->base + pll_info->reg[1]);
+	} else {
+		ctl = readl(cgu->base + pll_info->reg[1]);
+
+		ctl &= ~BIT(pll_info->bypass_bit);
+	}
+
 	ctl |= BIT(pll_info->enable_bit);
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->reg[1]);
 
 	/* wait for the PLL to stabilise */
 	for (i = 0; i < timeout; i++) {
-		ctl = readl(cgu->base + pll_info->reg);
+		ctl = readl(cgu->base + pll_info->reg[1]);
 		if (ctl & BIT(pll_info->stable_bit))
 			break;
 		mdelay(1);
@@ -245,11 +272,11 @@ static void ingenic_pll_disable(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->reg[1]);
 
 	ctl &= ~BIT(pll_info->enable_bit);
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->reg[1]);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 }
 
@@ -263,7 +290,7 @@ static int ingenic_pll_is_enabled(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->reg[1]);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 
 	return !!(ctl & BIT(pll_info->enable_bit));
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index 0dc8004..5f87be4 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -42,8 +42,18 @@
  * @stable_bit: the index of the stable bit in the PLL control register
  * @no_bypass_bit: if set, the PLL has no bypass functionality
  */
+enum ingenic_cgu_version {
+	CGU_JZ4740,
+	CGU_JZ4725B,
+	CGU_JZ4770,
+	CGU_JZ4780,
+	CGU_X1000,
+	CGU_X1830,
+};
+
 struct ingenic_cgu_pll_info {
-	unsigned reg;
+	enum ingenic_cgu_version version;
+	unsigned reg[2];
 	const s8 *od_encoding;
 	u8 m_shift, m_bits, m_offset;
 	u8 n_shift, n_bits, n_offset;
diff --git a/drivers/clk/ingenic/jz4725b-cgu.c b/drivers/clk/ingenic/jz4725b-cgu.c
index a3b4635..6da7b41 100644
--- a/drivers/clk/ingenic/jz4725b-cgu.c
+++ b/drivers/clk/ingenic/jz4725b-cgu.c
@@ -53,7 +53,8 @@ static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 		"pll", CGU_CLK_PLL,
 		.parents = { JZ4725B_CLK_EXT, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_CPPCR,
+			.version = CGU_JZ4725B,
+			.reg = { -1, CGU_REG_CPPCR },
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
index 4f0e92c..3cf800d 100644
--- a/drivers/clk/ingenic/jz4740-cgu.c
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -68,7 +68,8 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 		"pll", CGU_CLK_PLL,
 		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_CPPCR,
+			.version = CGU_JZ4740,
+			.reg = { -1, CGU_REG_CPPCR },
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
index 956dd65..a62dfb1 100644
--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -101,7 +101,8 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		"pll0", CGU_CLK_PLL,
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
-			.reg = CGU_REG_CPPCR0,
+			.version = CGU_JZ4770,
+			.reg = { -1, CGU_REG_CPPCR0 },
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -123,7 +124,8 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		"pll1", CGU_CLK_PLL,
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
-			.reg = CGU_REG_CPPCR1,
+			.version = CGU_JZ4770,
+			.reg = { -1, CGU_REG_CPPCR1 },
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index ea905ff..59356d1b 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -220,7 +220,8 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 	/* PLLs */
 
 #define DEF_PLL(name) { \
-	.reg = CGU_REG_ ## name, \
+	.version = CGU_JZ4780, \
+	.reg = { -1, CGU_REG_ ## name }, \
 	.m_shift = 19, \
 	.m_bits = 13, \
 	.m_offset = 1, \
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index b22d87b..7179b9f 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -57,7 +57,8 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		"apll", CGU_CLK_PLL,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_APLL,
+			.version = CGU_X1000,
+			.reg = { -1, CGU_REG_APLL },
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -78,7 +79,8 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		"mpll", CGU_CLK_PLL,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_MPLL,
+			.version = CGU_X1000,
+			.reg = { -1, CGU_REG_MPLL },
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
-- 
2.7.4



  reply	other threads:[~2019-11-27  3:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-27  3:32 clk: Ingenic: Add support for the X1830 and add USB clk for X1000 Zhou Yanjie
2019-11-27  3:32 ` Zhou Yanjie [this message]
2019-11-27 17:37   ` [PATCH 1/5] clk: Ingenic: Adjust code to make it compatible with X1830 Paul Cercueil
2019-11-28  6:29     ` Zhou Yanjie
2019-11-29 11:23       ` Paul Cercueil
2019-12-10 22:55         ` Paul Burton
2019-11-27  3:32 ` [PATCH 2/5] dt-bindings: clock: Add X1830 bindings Zhou Yanjie
2019-12-05 20:38   ` Rob Herring
2019-11-27  3:32 ` [PATCH 3/5] clk: Ingenic: Add CGU driver for X1830 Zhou Yanjie
2019-11-27  3:32 ` [PATCH 4/5] dt-bindings: clock: Add USB OTG clock for X1000 Zhou Yanjie
2019-11-27 17:19   ` Paul Cercueil
2019-11-28  5:44     ` Zhou Yanjie
2019-11-27  3:32 ` [PATCH 5/5] clk: Ingenic: " Zhou Yanjie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1574825576-91028-2-git-send-email-zhouyanjie@zoho.com \
    --to=zhouyanjie@zoho.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=paul.burton@mips.com \
    --cc=paul@crapouillou.net \
    --cc=paulburton@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sernia.zhou@foxmail.com \
    --cc=syq@debian.org \
    --cc=zhenwenjin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.