From: Yannick Fertre <yannick.fertre@st.com>
To: Yannick Fertre <yannick.fertre@st.com>,
Philippe Cornu <philippe.cornu@st.com>,
Benjamin Gaignard <benjamin.gaignard@st.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
<dri-devel@lists.freedesktop.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH] drm/stm: ltdc: move pinctrl to encoder mode set
Date: Wed, 27 Nov 2019 11:23:38 +0100 [thread overview]
Message-ID: <1574850218-13257-1-git-send-email-yannick.fertre@st.com> (raw)
From: Yannick Fertré <yannick.fertre@st.com>
The pin control must be set to default as soon as possible to
establish a good video link between tv & bridge hdmi
(encoder mode set is call before encoder enable).
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
---
drivers/gpu/drm/stm/ltdc.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 49ef406..dba8e7f 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -435,9 +435,6 @@ static void ltdc_crtc_atomic_enable(struct drm_crtc *crtc,
/* Commit shadow registers = update planes at next vblank */
reg_set(ldev->regs, LTDC_SRCR, SRCR_VBR);
- /* Enable LTDC */
- reg_set(ldev->regs, LTDC_GCR, GCR_LTDCEN);
-
drm_crtc_vblank_on(crtc);
}
@@ -451,9 +448,6 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
drm_crtc_vblank_off(crtc);
- /* disable LTDC */
- reg_clear(ldev->regs, LTDC_GCR, GCR_LTDCEN);
-
/* disable IRQ */
reg_clear(ldev->regs, LTDC_IER, IER_RRIE | IER_FUIE | IER_TERRIE);
@@ -1042,9 +1036,13 @@ static const struct drm_encoder_funcs ltdc_encoder_funcs = {
static void ltdc_encoder_disable(struct drm_encoder *encoder)
{
struct drm_device *ddev = encoder->dev;
+ struct ltdc_device *ldev = ddev->dev_private;
DRM_DEBUG_DRIVER("\n");
+ /* Disable LTDC */
+ reg_clear(ldev->regs, LTDC_GCR, GCR_LTDCEN);
+
/* Set to sleep state the pinctrl whatever type of encoder */
pinctrl_pm_select_sleep_state(ddev->dev);
}
@@ -1052,6 +1050,19 @@ static void ltdc_encoder_disable(struct drm_encoder *encoder)
static void ltdc_encoder_enable(struct drm_encoder *encoder)
{
struct drm_device *ddev = encoder->dev;
+ struct ltdc_device *ldev = ddev->dev_private;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Enable LTDC */
+ reg_set(ldev->regs, LTDC_GCR, GCR_LTDCEN);
+}
+
+static void ltdc_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *ddev = encoder->dev;
DRM_DEBUG_DRIVER("\n");
@@ -1067,6 +1078,7 @@ static void ltdc_encoder_enable(struct drm_encoder *encoder)
static const struct drm_encoder_helper_funcs ltdc_encoder_helper_funcs = {
.disable = ltdc_encoder_disable,
.enable = ltdc_encoder_enable,
+ .mode_set = ltdc_encoder_mode_set,
};
static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Yannick Fertre <yannick.fertre@st.com>
To: Yannick Fertre <yannick.fertre@st.com>,
Philippe Cornu <philippe.cornu@st.com>,
Benjamin Gaignard <benjamin.gaignard@st.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
<dri-devel@lists.freedesktop.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH] drm/stm: ltdc: move pinctrl to encoder mode set
Date: Wed, 27 Nov 2019 11:23:38 +0100 [thread overview]
Message-ID: <1574850218-13257-1-git-send-email-yannick.fertre@st.com> (raw)
From: Yannick Fertré <yannick.fertre@st.com>
The pin control must be set to default as soon as possible to
establish a good video link between tv & bridge hdmi
(encoder mode set is call before encoder enable).
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
---
drivers/gpu/drm/stm/ltdc.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 49ef406..dba8e7f 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -435,9 +435,6 @@ static void ltdc_crtc_atomic_enable(struct drm_crtc *crtc,
/* Commit shadow registers = update planes at next vblank */
reg_set(ldev->regs, LTDC_SRCR, SRCR_VBR);
- /* Enable LTDC */
- reg_set(ldev->regs, LTDC_GCR, GCR_LTDCEN);
-
drm_crtc_vblank_on(crtc);
}
@@ -451,9 +448,6 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
drm_crtc_vblank_off(crtc);
- /* disable LTDC */
- reg_clear(ldev->regs, LTDC_GCR, GCR_LTDCEN);
-
/* disable IRQ */
reg_clear(ldev->regs, LTDC_IER, IER_RRIE | IER_FUIE | IER_TERRIE);
@@ -1042,9 +1036,13 @@ static const struct drm_encoder_funcs ltdc_encoder_funcs = {
static void ltdc_encoder_disable(struct drm_encoder *encoder)
{
struct drm_device *ddev = encoder->dev;
+ struct ltdc_device *ldev = ddev->dev_private;
DRM_DEBUG_DRIVER("\n");
+ /* Disable LTDC */
+ reg_clear(ldev->regs, LTDC_GCR, GCR_LTDCEN);
+
/* Set to sleep state the pinctrl whatever type of encoder */
pinctrl_pm_select_sleep_state(ddev->dev);
}
@@ -1052,6 +1050,19 @@ static void ltdc_encoder_disable(struct drm_encoder *encoder)
static void ltdc_encoder_enable(struct drm_encoder *encoder)
{
struct drm_device *ddev = encoder->dev;
+ struct ltdc_device *ldev = ddev->dev_private;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Enable LTDC */
+ reg_set(ldev->regs, LTDC_GCR, GCR_LTDCEN);
+}
+
+static void ltdc_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *ddev = encoder->dev;
DRM_DEBUG_DRIVER("\n");
@@ -1067,6 +1078,7 @@ static void ltdc_encoder_enable(struct drm_encoder *encoder)
static const struct drm_encoder_helper_funcs ltdc_encoder_helper_funcs = {
.disable = ltdc_encoder_disable,
.enable = ltdc_encoder_enable,
+ .mode_set = ltdc_encoder_mode_set,
};
static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Yannick Fertre <yannick.fertre@st.com>
To: Yannick Fertre <yannick.fertre@st.com>,
Philippe Cornu <philippe.cornu@st.com>,
Benjamin Gaignard <benjamin.gaignard@st.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
dri-devel@lists.freedesktop.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] drm/stm: ltdc: move pinctrl to encoder mode set
Date: Wed, 27 Nov 2019 11:23:38 +0100 [thread overview]
Message-ID: <1574850218-13257-1-git-send-email-yannick.fertre@st.com> (raw)
From: Yannick Fertré <yannick.fertre@st.com>
The pin control must be set to default as soon as possible to
establish a good video link between tv & bridge hdmi
(encoder mode set is call before encoder enable).
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
---
drivers/gpu/drm/stm/ltdc.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 49ef406..dba8e7f 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -435,9 +435,6 @@ static void ltdc_crtc_atomic_enable(struct drm_crtc *crtc,
/* Commit shadow registers = update planes at next vblank */
reg_set(ldev->regs, LTDC_SRCR, SRCR_VBR);
- /* Enable LTDC */
- reg_set(ldev->regs, LTDC_GCR, GCR_LTDCEN);
-
drm_crtc_vblank_on(crtc);
}
@@ -451,9 +448,6 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
drm_crtc_vblank_off(crtc);
- /* disable LTDC */
- reg_clear(ldev->regs, LTDC_GCR, GCR_LTDCEN);
-
/* disable IRQ */
reg_clear(ldev->regs, LTDC_IER, IER_RRIE | IER_FUIE | IER_TERRIE);
@@ -1042,9 +1036,13 @@ static const struct drm_encoder_funcs ltdc_encoder_funcs = {
static void ltdc_encoder_disable(struct drm_encoder *encoder)
{
struct drm_device *ddev = encoder->dev;
+ struct ltdc_device *ldev = ddev->dev_private;
DRM_DEBUG_DRIVER("\n");
+ /* Disable LTDC */
+ reg_clear(ldev->regs, LTDC_GCR, GCR_LTDCEN);
+
/* Set to sleep state the pinctrl whatever type of encoder */
pinctrl_pm_select_sleep_state(ddev->dev);
}
@@ -1052,6 +1050,19 @@ static void ltdc_encoder_disable(struct drm_encoder *encoder)
static void ltdc_encoder_enable(struct drm_encoder *encoder)
{
struct drm_device *ddev = encoder->dev;
+ struct ltdc_device *ldev = ddev->dev_private;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Enable LTDC */
+ reg_set(ldev->regs, LTDC_GCR, GCR_LTDCEN);
+}
+
+static void ltdc_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *ddev = encoder->dev;
DRM_DEBUG_DRIVER("\n");
@@ -1067,6 +1078,7 @@ static void ltdc_encoder_enable(struct drm_encoder *encoder)
static const struct drm_encoder_helper_funcs ltdc_encoder_helper_funcs = {
.disable = ltdc_encoder_disable,
.enable = ltdc_encoder_enable,
+ .mode_set = ltdc_encoder_mode_set,
};
static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Yannick Fertre <yannick.fertre@st.com>
To: Yannick Fertre <yannick.fertre@st.com>,
Philippe Cornu <philippe.cornu@st.com>,
Benjamin Gaignard <benjamin.gaignard@st.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
<dri-devel@lists.freedesktop.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH] drm/stm: ltdc: move pinctrl to encoder mode set
Date: Wed, 27 Nov 2019 11:23:38 +0100 [thread overview]
Message-ID: <1574850218-13257-1-git-send-email-yannick.fertre@st.com> (raw)
Message-ID: <20191127102338.K54sEY_-DqJhXwJOxbkciXBDMV0JUhjPIXX2XQi3lWg@z> (raw)
From: Yannick Fertré <yannick.fertre@st.com>
The pin control must be set to default as soon as possible to
establish a good video link between tv & bridge hdmi
(encoder mode set is call before encoder enable).
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
---
drivers/gpu/drm/stm/ltdc.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 49ef406..dba8e7f 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -435,9 +435,6 @@ static void ltdc_crtc_atomic_enable(struct drm_crtc *crtc,
/* Commit shadow registers = update planes at next vblank */
reg_set(ldev->regs, LTDC_SRCR, SRCR_VBR);
- /* Enable LTDC */
- reg_set(ldev->regs, LTDC_GCR, GCR_LTDCEN);
-
drm_crtc_vblank_on(crtc);
}
@@ -451,9 +448,6 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
drm_crtc_vblank_off(crtc);
- /* disable LTDC */
- reg_clear(ldev->regs, LTDC_GCR, GCR_LTDCEN);
-
/* disable IRQ */
reg_clear(ldev->regs, LTDC_IER, IER_RRIE | IER_FUIE | IER_TERRIE);
@@ -1042,9 +1036,13 @@ static const struct drm_encoder_funcs ltdc_encoder_funcs = {
static void ltdc_encoder_disable(struct drm_encoder *encoder)
{
struct drm_device *ddev = encoder->dev;
+ struct ltdc_device *ldev = ddev->dev_private;
DRM_DEBUG_DRIVER("\n");
+ /* Disable LTDC */
+ reg_clear(ldev->regs, LTDC_GCR, GCR_LTDCEN);
+
/* Set to sleep state the pinctrl whatever type of encoder */
pinctrl_pm_select_sleep_state(ddev->dev);
}
@@ -1052,6 +1050,19 @@ static void ltdc_encoder_disable(struct drm_encoder *encoder)
static void ltdc_encoder_enable(struct drm_encoder *encoder)
{
struct drm_device *ddev = encoder->dev;
+ struct ltdc_device *ldev = ddev->dev_private;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Enable LTDC */
+ reg_set(ldev->regs, LTDC_GCR, GCR_LTDCEN);
+}
+
+static void ltdc_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *ddev = encoder->dev;
DRM_DEBUG_DRIVER("\n");
@@ -1067,6 +1078,7 @@ static void ltdc_encoder_enable(struct drm_encoder *encoder)
static const struct drm_encoder_helper_funcs ltdc_encoder_helper_funcs = {
.disable = ltdc_encoder_disable,
.enable = ltdc_encoder_enable,
+ .mode_set = ltdc_encoder_mode_set,
};
static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2019-11-27 10:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-27 10:23 Yannick Fertre [this message]
2019-11-27 10:23 ` [PATCH] drm/stm: ltdc: move pinctrl to encoder mode set Yannick Fertre
2019-11-27 10:23 ` Yannick Fertre
2019-11-27 10:23 ` Yannick Fertre
2019-12-02 17:18 ` Philippe CORNU
2019-12-02 17:18 ` Philippe CORNU
2019-12-02 17:18 ` Philippe CORNU
2019-12-20 12:33 ` Benjamin Gaignard
2019-12-20 12:33 ` Benjamin Gaignard
2019-12-20 12:33 ` Benjamin Gaignard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1574850218-13257-1-git-send-email-yannick.fertre@st.com \
--to=yannick.fertre@st.com \
--cc=airlied@linux.ie \
--cc=alexandre.torgue@st.com \
--cc=benjamin.gaignard@st.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=philippe.cornu@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.