All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
To: gokulsri@codeaurora.org, sboyd@kernel.org, agross@kernel.org,
	bjorn.andersson@linaro.org, david.brown@linaro.org,
	devicetree@vger.kernel.org, jassisinghbrar@gmail.com,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	mark.rutland@arm.com, mturquette@baylibre.com, ohad@wizery.com,
	robh+dt@kernel.org, sricharan@codeaurora.org,
	nprakash@codeaurora.org
Subject: [PATCH V3 01/10] remoteproc: qcom: Add PRNG proxy clock
Date: Wed, 27 Nov 2019 20:42:45 +0530	[thread overview]
Message-ID: <1574867574-2216-2-git-send-email-gokulsri@codeaurora.org> (raw)
In-Reply-To: <1574867574-2216-1-git-send-email-gokulsri@codeaurora.org>

PRNG clock is needed by the secure PIL, support for the same
is added in subsequent patches.

Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_wcss.c | 69 ++++++++++++++++++++++++++-----------
 1 file changed, 49 insertions(+), 20 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index a2671a1..e5cc064 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -91,19 +91,6 @@ enum {
 	WCSS_QCS404,
 };
 
-struct wcss_data {
-	const char *firmware_name;
-	int crash_reason_smem;
-	u32 version;
-	bool aon_reset_required;
-	bool wcss_q6_reset_required;
-	const char *ssr_name;
-	const char *sysmon_name;
-	int ssctl_id;
-	const struct rproc_ops *ops;
-	bool requires_force_stop;
-};
-
 struct q6v5_wcss {
 	struct device *dev;
 
@@ -128,6 +115,7 @@ struct q6v5_wcss {
 	struct clk *qdsp6ss_xo_cbcr;
 	struct clk *qdsp6ss_core_gfmux;
 	struct clk *lcc_bcr_sleep;
+	struct clk *prng_clk;
 	struct regulator *cx_supply;
 
 	struct qcom_rproc_glink glink_subdev;
@@ -151,6 +139,21 @@ struct q6v5_wcss {
 	bool requires_force_stop;
 };
 
+struct wcss_data {
+	int (*init_clock)(struct q6v5_wcss *wcss);
+	int (*init_regulator)(struct q6v5_wcss *wcss);
+	const char *firmware_name;
+	int crash_reason_smem;
+	u32 version;
+	bool aon_reset_required;
+	bool wcss_q6_reset_required;
+	const char *ssr_name;
+	const char *sysmon_name;
+	int ssctl_id;
+	const struct rproc_ops *ops;
+	bool requires_force_stop;
+};
+
 static int q6v5_wcss_reset(struct q6v5_wcss *wcss)
 {
 	int ret;
@@ -240,6 +243,12 @@ static int q6v5_wcss_start(struct rproc *rproc)
 	struct q6v5_wcss *wcss = rproc->priv;
 	int ret;
 
+	ret = clk_prepare_enable(wcss->prng_clk);
+	if (ret) {
+		dev_err(wcss->dev, "prng clock enable failed\n");
+		return ret;
+	}
+
 	qcom_q6v5_prepare(&wcss->q6v5);
 
 	/* Release Q6 and WCSS reset */
@@ -732,6 +741,7 @@ static int q6v5_wcss_stop(struct rproc *rproc)
 			return ret;
 	}
 
+	clk_disable_unprepare(wcss->prng_clk);
 	qcom_q6v5_unprepare(&wcss->q6v5);
 
 	return 0;
@@ -889,7 +899,21 @@ static int q6v5_alloc_memory_region(struct q6v5_wcss *wcss)
 	return 0;
 }
 
-static int q6v5_wcss_init_clock(struct q6v5_wcss *wcss)
+static int ipq8074_init_clock(struct q6v5_wcss *wcss)
+{
+	int ret;
+
+	wcss->prng_clk = devm_clk_get(wcss->dev, "prng");
+	if (IS_ERR(wcss->prng_clk)) {
+		ret = PTR_ERR(wcss->prng_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(wcss->dev, "Failed to get prng clock\n");
+		return ret;
+	}
+	return 0;
+}
+
+static int qcs404_init_clock(struct q6v5_wcss *wcss)
 {
 	int ret;
 
@@ -979,7 +1003,7 @@ static int q6v5_wcss_init_clock(struct q6v5_wcss *wcss)
 	return 0;
 }
 
-static int q6v5_wcss_init_regulator(struct q6v5_wcss *wcss)
+static int qcs404_init_regulator(struct q6v5_wcss *wcss)
 {
 	wcss->cx_supply = devm_regulator_get(wcss->dev, "cx");
 	if (IS_ERR(wcss->cx_supply))
@@ -1023,14 +1047,16 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;
 
-	if (wcss->version == WCSS_QCS404) {
-		ret = q6v5_wcss_init_clock(wcss);
+	if (desc->init_clock) {
+		ret = desc->init_clock(wcss);
 		if (ret)
 			goto free_rproc;
 
-		ret = q6v5_wcss_init_regulator(wcss);
-		if (ret)
-			goto free_rproc;
+		if (desc->init_regulator) {
+			ret = desc->init_regulator(wcss);
+			if (ret)
+				goto free_rproc;
+		}
 	}
 
 	ret = q6v5_wcss_init_reset(wcss, desc);
@@ -1073,6 +1099,7 @@ static int q6v5_wcss_remove(struct platform_device *pdev)
 }
 
 static const struct wcss_data wcss_ipq8074_res_init = {
+	.init_clock = ipq8074_init_clock,
 	.firmware_name = "IPQ8074/q6_fw.mdt",
 	.crash_reason_smem = WCSS_CRASH_REASON,
 	.aon_reset_required = true,
@@ -1082,6 +1109,8 @@ static int q6v5_wcss_remove(struct platform_device *pdev)
 };
 
 static const struct wcss_data wcss_qcs404_res_init = {
+	.init_clock = qcs404_init_clock,
+	.init_regulator = qcs404_init_regulator,
 	.crash_reason_smem = WCSS_CRASH_REASON,
 	.firmware_name = "wcnss.mdt",
 	.version = WCSS_QCS404,
-- 
1.9.1

  reply	other threads:[~2019-11-27 15:12 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-27 15:12 [PATCH V3 00/10] remoteproc: qcom: q6v5-wcss: Add support for secure pil Gokul Sriram Palanisamy
2019-11-27 15:12 ` Gokul Sriram Palanisamy [this message]
2019-11-27 15:12 ` [PATCH V3 02/10] remoteproc: qcom: Add secure PIL support Gokul Sriram Palanisamy
2019-11-27 15:12 ` [PATCH V3 03/10] remoteproc: qcom: Add support for split q6 + m3 wlan firmware Gokul Sriram Palanisamy
2019-11-27 15:12 ` [PATCH V3 04/10] remoteproc: qcom: Add ssr subdevice identifier Gokul Sriram Palanisamy
2019-11-27 15:12 ` [PATCH V3 05/10] remoteproc: qcom: Update regmap offsets for halt register Gokul Sriram Palanisamy
2019-11-27 15:12 ` [PATCH V3 06/10] dt-bindings: clock: qcom: Add reset for WCSSAON Gokul Sriram Palanisamy
2019-11-27 15:12 ` [PATCH V3 07/10] clk: qcom: Add WCSSAON reset Gokul Sriram Palanisamy
2019-11-27 15:12 ` [PATCH V3 08/10] dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC Gokul Sriram Palanisamy
2019-11-27 15:12 ` [PATCH V3 09/10] arm64: dts: Add support for scm on IPQ8074 SoCs Gokul Sriram Palanisamy
2019-11-27 15:12 ` [PATCH V3 10/10] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC Gokul Sriram Palanisamy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1574867574-2216-2-git-send-email-gokulsri@codeaurora.org \
    --to=gokulsri@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=nprakash@codeaurora.org \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sricharan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.