From: Ashish Kumar <Ashish.Kumar@nxp.com> To: devicetree@vger.kernel.org, robh@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Ashish Kumar <Ashish.Kumar@nxp.com>, Kuldeep Singh <kuldeep.singh@nxp.com> Subject: [Patch v2 3/5] arm64: dts: ls1046a: Update QSPI node properties of ls1046ardb Date: Wed, 4 Dec 2019 16:28:16 +0530 [thread overview] Message-ID: <1575457098-18368-4-git-send-email-Ashish.Kumar@nxp.com> (raw) In-Reply-To: <1575457098-18368-1-git-send-email-Ashish.Kumar@nxp.com> Update the compatibles to use jedec,spi-nor. Also update the max-frequency to 50MHz and spi-tx-bus-width to 1. Align the QSPI node with other similar boards like(ls1088ardb, ls1046afrwy) as per bindings. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> --- v2: Rebased to top Use "jedec,spi-nor" in compatibles .../arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 0c742befb761..dbc23d6cd3b4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -101,23 +101,23 @@ &qspi { status = "okay"; - qflash0: flash@0 { - compatible = "spansion,m25p80"; + s25fs512s0: flash@0 { + compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; reg = <0>; }; - qflash1: flash@1 { - compatible = "spansion,m25p80"; + s25fs512s1: flash@1 { + compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; reg = <1>; }; }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ashish Kumar <Ashish.Kumar@nxp.com> To: devicetree@vger.kernel.org, robh@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org Cc: Kuldeep Singh <kuldeep.singh@nxp.com>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Ashish Kumar <Ashish.Kumar@nxp.com> Subject: [Patch v2 3/5] arm64: dts: ls1046a: Update QSPI node properties of ls1046ardb Date: Wed, 4 Dec 2019 16:28:16 +0530 [thread overview] Message-ID: <1575457098-18368-4-git-send-email-Ashish.Kumar@nxp.com> (raw) In-Reply-To: <1575457098-18368-1-git-send-email-Ashish.Kumar@nxp.com> Update the compatibles to use jedec,spi-nor. Also update the max-frequency to 50MHz and spi-tx-bus-width to 1. Align the QSPI node with other similar boards like(ls1088ardb, ls1046afrwy) as per bindings. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> --- v2: Rebased to top Use "jedec,spi-nor" in compatibles .../arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 0c742befb761..dbc23d6cd3b4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -101,23 +101,23 @@ &qspi { status = "okay"; - qflash0: flash@0 { - compatible = "spansion,m25p80"; + s25fs512s0: flash@0 { + compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; reg = <0>; }; - qflash1: flash@1 { - compatible = "spansion,m25p80"; + s25fs512s1: flash@1 { + compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; reg = <1>; }; }; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-12-04 10:58 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-04 10:58 [Patch v2 0/5] Add dts support for various NXP boards Ashish Kumar 2019-12-04 10:58 ` Ashish Kumar 2019-12-04 10:58 ` [Patch v2 1/5] arm64: dts: ls1028a: Add FlexSPI support Ashish Kumar 2019-12-04 10:58 ` Ashish Kumar 2019-12-04 10:58 ` [Patch v2 2/5] arm64: dts: ls1046a: Add QSPI node for ls1046afrwy Ashish Kumar 2019-12-04 10:58 ` Ashish Kumar 2019-12-04 10:58 ` Ashish Kumar [this message] 2019-12-04 10:58 ` [Patch v2 3/5] arm64: dts: ls1046a: Update QSPI node properties of ls1046ardb Ashish Kumar 2019-12-04 10:58 ` [Patch v2 4/5] arm64: dts: ls208x: Remove non-compatible driver device from qspi node Ashish Kumar 2019-12-04 10:58 ` Ashish Kumar 2019-12-04 10:58 ` [Patch v2 5/5] arm64: dts: ls1088a: Add QSPI support for NXP LS1088 Ashish Kumar 2019-12-04 10:58 ` Ashish Kumar 2019-12-11 3:14 ` [Patch v2 0/5] Add dts support for various NXP boards Shawn Guo 2019-12-11 3:14 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1575457098-18368-4-git-send-email-Ashish.Kumar@nxp.com \ --to=ashish.kumar@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=kuldeep.singh@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.