From: Yash Shah <yash.shah@sifive.com> To: linus.walleij@linaro.org, bgolaszewski@baylibre.com, robh+dt@kernel.org, mark.rutland@arm.com, palmer@dabbelt.com, paul.walmsley@sifive.com Cc: aou@eecs.berkeley.edu, tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org, bmeng.cn@gmail.com, atish.patra@wdc.com, sagar.kadam@sifive.com, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org, sachin.ghadi@sifive.com, Yash Shah <yash.shah@sifive.com> Subject: [PATCH v4 6/6] riscv: dts: Add DT support for SiFive FU540 GPIO driver Date: Tue, 10 Dec 2019 16:41:14 +0530 [thread overview] Message-ID: <1575976274-13487-7-git-send-email-yash.shah@sifive.com> (raw) In-Reply-To: <1575976274-13487-1-git-send-email-yash.shah@sifive.com> Add the gpio DT node in SiFive FU540 soc-specific DT file. Enable the gpio node in HiFive Unleashed board-specific DT file. Signed-off-by: Yash Shah <yash.shah@sifive.com> --- arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 15 ++++++++++++++- arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 4 ++++ 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi index afa43c7..96dca93 100644 --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi @@ -246,6 +246,19 @@ #pwm-cells = <3>; status = "disabled"; }; - + gpio: gpio@10060000 { + compatible = "sifive,fu540-c000-gpio", "sifive,gpio0"; + interrupt-parent = <&plic0>; + interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, + <14>, <15>, <16>, <17>, <18>, <19>, <20>, + <21>, <22>; + reg = <0x0 0x10060000 0x0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&prci PRCI_CLK_TLCLK>; + status = "disabled"; + }; }; }; diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts index 88cfcb9..609198c 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts @@ -94,3 +94,7 @@ &pwm1 { status = "okay"; }; + +&gpio { + status = "okay"; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Yash Shah <yash.shah@sifive.com> To: linus.walleij@linaro.org, bgolaszewski@baylibre.com, robh+dt@kernel.org, mark.rutland@arm.com, palmer@dabbelt.com, paul.walmsley@sifive.com Cc: devicetree@vger.kernel.org, aou@eecs.berkeley.edu, jason@lakedaemon.net, linux-gpio@vger.kernel.org, maz@kernel.org, linux-kernel@vger.kernel.org, atish.patra@wdc.com, Yash Shah <yash.shah@sifive.com>, sagar.kadam@sifive.com, tglx@linutronix.de, bmeng.cn@gmail.com, linux-riscv@lists.infradead.org, sachin.ghadi@sifive.com Subject: [PATCH v4 6/6] riscv: dts: Add DT support for SiFive FU540 GPIO driver Date: Tue, 10 Dec 2019 16:41:14 +0530 [thread overview] Message-ID: <1575976274-13487-7-git-send-email-yash.shah@sifive.com> (raw) In-Reply-To: <1575976274-13487-1-git-send-email-yash.shah@sifive.com> Add the gpio DT node in SiFive FU540 soc-specific DT file. Enable the gpio node in HiFive Unleashed board-specific DT file. Signed-off-by: Yash Shah <yash.shah@sifive.com> --- arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 15 ++++++++++++++- arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 4 ++++ 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi index afa43c7..96dca93 100644 --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi @@ -246,6 +246,19 @@ #pwm-cells = <3>; status = "disabled"; }; - + gpio: gpio@10060000 { + compatible = "sifive,fu540-c000-gpio", "sifive,gpio0"; + interrupt-parent = <&plic0>; + interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, + <14>, <15>, <16>, <17>, <18>, <19>, <20>, + <21>, <22>; + reg = <0x0 0x10060000 0x0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&prci PRCI_CLK_TLCLK>; + status = "disabled"; + }; }; }; diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts index 88cfcb9..609198c 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts @@ -94,3 +94,7 @@ &pwm1 { status = "okay"; }; + +&gpio { + status = "okay"; +}; -- 2.7.4
next prev parent reply other threads:[~2019-12-10 11:12 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-10 11:11 [PATCH v4 0/6] GPIO & Hierarchy IRQ support for HiFive Unleashed Yash Shah 2019-12-10 11:11 ` Yash Shah 2019-12-10 11:11 ` [PATCH v4 1/6] genirq: introduce irq_domain_translate_onecell Yash Shah 2019-12-10 11:11 ` Yash Shah 2020-01-24 19:11 ` [tip: irq/core] genirq: Introduce irq_domain_translate_onecell tip-bot2 for Yash Shah 2019-12-10 11:11 ` [PATCH v4 2/6] irqchip: nvic: Use irq_domain_translate_onecell instead of custom func Yash Shah 2019-12-10 11:11 ` Yash Shah 2020-01-24 19:11 ` [tip: irq/core] irqchip/nvic: " tip-bot2 for Yash Shah 2019-12-10 11:11 ` [PATCH v4 3/6] irqchip: sifive: Support hierarchy irq domain Yash Shah 2019-12-10 11:11 ` Yash Shah 2020-01-24 19:11 ` [tip: irq/core] irqchip/sifive-plic: Support irq domain hierarchy tip-bot2 for Yash Shah 2019-12-10 11:11 ` [PATCH v4 4/6] gpio: sifive: Add DT documentation for SiFive GPIO Yash Shah 2019-12-10 11:11 ` Yash Shah 2019-12-18 20:51 ` Rob Herring 2019-12-18 20:51 ` Rob Herring 2020-01-24 19:11 ` [tip: irq/core] gpio/sifive: " tip-bot2 for Yash Shah 2019-12-10 11:11 ` [PATCH v4 5/6] gpio: sifive: Add GPIO driver for SiFive SoCs Yash Shah 2019-12-10 11:11 ` Yash Shah 2020-01-24 19:11 ` [tip: irq/core] gpio/sifive: " tip-bot2 for Yash Shah 2019-12-10 11:11 ` Yash Shah [this message] 2019-12-10 11:11 ` [PATCH v4 6/6] riscv: dts: Add DT support for SiFive FU540 GPIO driver Yash Shah 2020-01-20 9:09 ` [PATCH v4 0/6] GPIO & Hierarchy IRQ support for HiFive Unleashed Marc Zyngier 2020-01-20 9:09 ` Marc Zyngier 2020-01-21 8:53 ` Yash Shah 2020-01-21 8:53 ` Yash Shah 2020-01-29 15:00 ` Palmer Dabbelt 2020-01-29 15:00 ` Palmer Dabbelt
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1575976274-13487-7-git-send-email-yash.shah@sifive.com \ --to=yash.shah@sifive.com \ --cc=aou@eecs.berkeley.edu \ --cc=atish.patra@wdc.com \ --cc=bgolaszewski@baylibre.com \ --cc=bmeng.cn@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=jason@lakedaemon.net \ --cc=linus.walleij@linaro.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=maz@kernel.org \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ --cc=robh+dt@kernel.org \ --cc=sachin.ghadi@sifive.com \ --cc=sagar.kadam@sifive.com \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.