All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tamizh Chelvam <tamizhr@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: devicetree@vger.kernel.org, linux-wireless@vger.kernel.org,
	Tamizh Chelvam <tamizhr@codeaurora.org>
Subject: [PATCHv2 2/2] ath10k: Add support to read btcoex related data from DT
Date: Tue, 28 Jan 2020 00:48:56 +0530	[thread overview]
Message-ID: <1580152736-18654-2-git-send-email-tamizhr@codeaurora.org> (raw)
In-Reply-To: <1580152736-18654-1-git-send-email-tamizhr@codeaurora.org>

BTCOEX feature is not supported by all QCA4019 chipsets.
Since btcoex enabled by default in firmware, host needs to
enable COEX support depends on the hardware. Enabling it
by default in unsupported hardware will cause some
feature disabled in hardware.
This patch will read btcoex_support flag and
wlan priority gpio pin number from DT. Depends on the
btcoex_support flag value host will expose BTCOEX support
and wlan priority gpio pin number to target.

Testing:
	* Tested HW : QCA4019
	* Tested FW : 10.4-3.2.1.1-00017

Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
---
v2:
  * Changed coex_support to bool type

 drivers/net/wireless/ath/ath10k/core.c  | 44 ++++++++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/core.h  |  3 +++
 drivers/net/wireless/ath/ath10k/debug.c |  3 +++
 drivers/net/wireless/ath/ath10k/mac.c   |  3 ++-
 drivers/net/wireless/ath/ath10k/wmi.c   |  2 +-
 5 files changed, 52 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5ec16ce..5712e28 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2119,6 +2119,40 @@ static int ath10k_download_cal_data(struct ath10k *ar)
 	return 0;
 }
 
+static void ath10k_core_fetch_btcoex_dt(struct ath10k *ar)
+{
+	struct device_node *node;
+	u8 coex_support = 0;
+	int ret;
+
+	node = ar->dev->of_node;
+	if (!node)
+		goto out;
+
+	ret = of_property_read_u8(node, "qcom,coexist-support", &coex_support);
+	if (ret) {
+		ar->coex_support = true;
+		goto out;
+	}
+
+	if (coex_support) {
+		ar->coex_support = true;
+	} else {
+		ar->coex_support = false;
+		ar->coex_gpio_pin = -1;
+		goto out;
+	}
+
+	ret = of_property_read_u32(node, "qcom,coexist-gpio-pin",
+				   &ar->coex_gpio_pin);
+	if (ret)
+		ar->coex_gpio_pin = -1;
+
+out:
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot coex_support %d coex_gpio_pin %d\n",
+		   ar->coex_support, ar->coex_gpio_pin);
+}
+
 static int ath10k_init_uart(struct ath10k *ar)
 {
 	int ret;
@@ -2696,14 +2730,22 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
 		if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map))
 			val |= WMI_10_4_BSS_CHANNEL_INFO_64;
 
+		ath10k_core_fetch_btcoex_dt(ar);
+
 		/* 10.4 firmware supports BT-Coex without reloading firmware
 		 * via pdev param. To support Bluetooth coexistence pdev param,
 		 * WMI_COEX_GPIO_SUPPORT of extended resource config should be
 		 * enabled always.
+		 *
+		 * We can still enable BTCOEX if firmware has the support
+		 * eventhough btceox_support value is
+		 * ATH10K_DT_BTCOEX_NOT_FOUND
 		 */
+
 		if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) &&
 		    test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
-			     ar->running_fw->fw_file.fw_features))
+			     ar->running_fw->fw_file.fw_features) &&
+		    ar->coex_support)
 			val |= WMI_10_4_COEX_GPIO_SUPPORT;
 
 		if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 5101bf2..edf314e 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -1222,6 +1222,9 @@ struct ath10k {
 	struct ath10k_bus_params bus_param;
 	struct completion peer_delete_done;
 
+	bool coex_support;
+	int coex_gpio_pin;
+
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
 };
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index e000677..3894b77 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -1978,6 +1978,9 @@ static ssize_t ath10k_write_btcoex(struct file *file,
 	if (strtobool(buf, &val) != 0)
 		return -EINVAL;
 
+	if (!ar->coex_support)
+		return -EOPNOTSUPP;
+
 	mutex_lock(&ar->conf_mutex);
 
 	if (ar->state != ATH10K_STATE_ON &&
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 7fee35f..ac3ad5c 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4982,7 +4982,8 @@ static int ath10k_start(struct ieee80211_hw *hw)
 	param = ar->wmi.pdev_param->enable_btcoex;
 	if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) &&
 	    test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
-		     ar->running_fw->fw_file.fw_features)) {
+		     ar->running_fw->fw_file.fw_features) &&
+	    ar->coex_support) {
 		ret = ath10k_wmi_pdev_set_param(ar, param, 0);
 		if (ret) {
 			ath10k_warn(ar,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 61885d4..e76e365 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -8787,7 +8787,7 @@ static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
 	cmd = (struct wmi_ext_resource_config_10_4_cmd *)skb->data;
 	cmd->host_platform_config = __cpu_to_le32(type);
 	cmd->fw_feature_bitmap = __cpu_to_le32(fw_feature_bitmap);
-	cmd->wlan_gpio_priority = __cpu_to_le32(-1);
+	cmd->wlan_gpio_priority = __cpu_to_le32(ar->coex_gpio_pin);
 	cmd->coex_version = __cpu_to_le32(WMI_NO_COEX_VERSION_SUPPORT);
 	cmd->coex_gpio_pin1 = __cpu_to_le32(-1);
 	cmd->coex_gpio_pin2 = __cpu_to_le32(-1);
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Tamizh Chelvam <tamizhr@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: devicetree@vger.kernel.org, linux-wireless@vger.kernel.org,
	Tamizh Chelvam <tamizhr@codeaurora.org>
Subject: [PATCHv2 2/2] ath10k: Add support to read btcoex related data from DT
Date: Tue, 28 Jan 2020 00:48:56 +0530	[thread overview]
Message-ID: <1580152736-18654-2-git-send-email-tamizhr@codeaurora.org> (raw)
In-Reply-To: <1580152736-18654-1-git-send-email-tamizhr@codeaurora.org>

BTCOEX feature is not supported by all QCA4019 chipsets.
Since btcoex enabled by default in firmware, host needs to
enable COEX support depends on the hardware. Enabling it
by default in unsupported hardware will cause some
feature disabled in hardware.
This patch will read btcoex_support flag and
wlan priority gpio pin number from DT. Depends on the
btcoex_support flag value host will expose BTCOEX support
and wlan priority gpio pin number to target.

Testing:
	* Tested HW : QCA4019
	* Tested FW : 10.4-3.2.1.1-00017

Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
---
v2:
  * Changed coex_support to bool type

 drivers/net/wireless/ath/ath10k/core.c  | 44 ++++++++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/core.h  |  3 +++
 drivers/net/wireless/ath/ath10k/debug.c |  3 +++
 drivers/net/wireless/ath/ath10k/mac.c   |  3 ++-
 drivers/net/wireless/ath/ath10k/wmi.c   |  2 +-
 5 files changed, 52 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5ec16ce..5712e28 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2119,6 +2119,40 @@ static int ath10k_download_cal_data(struct ath10k *ar)
 	return 0;
 }
 
+static void ath10k_core_fetch_btcoex_dt(struct ath10k *ar)
+{
+	struct device_node *node;
+	u8 coex_support = 0;
+	int ret;
+
+	node = ar->dev->of_node;
+	if (!node)
+		goto out;
+
+	ret = of_property_read_u8(node, "qcom,coexist-support", &coex_support);
+	if (ret) {
+		ar->coex_support = true;
+		goto out;
+	}
+
+	if (coex_support) {
+		ar->coex_support = true;
+	} else {
+		ar->coex_support = false;
+		ar->coex_gpio_pin = -1;
+		goto out;
+	}
+
+	ret = of_property_read_u32(node, "qcom,coexist-gpio-pin",
+				   &ar->coex_gpio_pin);
+	if (ret)
+		ar->coex_gpio_pin = -1;
+
+out:
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot coex_support %d coex_gpio_pin %d\n",
+		   ar->coex_support, ar->coex_gpio_pin);
+}
+
 static int ath10k_init_uart(struct ath10k *ar)
 {
 	int ret;
@@ -2696,14 +2730,22 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
 		if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map))
 			val |= WMI_10_4_BSS_CHANNEL_INFO_64;
 
+		ath10k_core_fetch_btcoex_dt(ar);
+
 		/* 10.4 firmware supports BT-Coex without reloading firmware
 		 * via pdev param. To support Bluetooth coexistence pdev param,
 		 * WMI_COEX_GPIO_SUPPORT of extended resource config should be
 		 * enabled always.
+		 *
+		 * We can still enable BTCOEX if firmware has the support
+		 * eventhough btceox_support value is
+		 * ATH10K_DT_BTCOEX_NOT_FOUND
 		 */
+
 		if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) &&
 		    test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
-			     ar->running_fw->fw_file.fw_features))
+			     ar->running_fw->fw_file.fw_features) &&
+		    ar->coex_support)
 			val |= WMI_10_4_COEX_GPIO_SUPPORT;
 
 		if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 5101bf2..edf314e 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -1222,6 +1222,9 @@ struct ath10k {
 	struct ath10k_bus_params bus_param;
 	struct completion peer_delete_done;
 
+	bool coex_support;
+	int coex_gpio_pin;
+
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
 };
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index e000677..3894b77 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -1978,6 +1978,9 @@ static ssize_t ath10k_write_btcoex(struct file *file,
 	if (strtobool(buf, &val) != 0)
 		return -EINVAL;
 
+	if (!ar->coex_support)
+		return -EOPNOTSUPP;
+
 	mutex_lock(&ar->conf_mutex);
 
 	if (ar->state != ATH10K_STATE_ON &&
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 7fee35f..ac3ad5c 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4982,7 +4982,8 @@ static int ath10k_start(struct ieee80211_hw *hw)
 	param = ar->wmi.pdev_param->enable_btcoex;
 	if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) &&
 	    test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
-		     ar->running_fw->fw_file.fw_features)) {
+		     ar->running_fw->fw_file.fw_features) &&
+	    ar->coex_support) {
 		ret = ath10k_wmi_pdev_set_param(ar, param, 0);
 		if (ret) {
 			ath10k_warn(ar,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 61885d4..e76e365 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -8787,7 +8787,7 @@ static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
 	cmd = (struct wmi_ext_resource_config_10_4_cmd *)skb->data;
 	cmd->host_platform_config = __cpu_to_le32(type);
 	cmd->fw_feature_bitmap = __cpu_to_le32(fw_feature_bitmap);
-	cmd->wlan_gpio_priority = __cpu_to_le32(-1);
+	cmd->wlan_gpio_priority = __cpu_to_le32(ar->coex_gpio_pin);
 	cmd->coex_version = __cpu_to_le32(WMI_NO_COEX_VERSION_SUPPORT);
 	cmd->coex_gpio_pin1 = __cpu_to_le32(-1);
 	cmd->coex_gpio_pin2 = __cpu_to_le32(-1);
-- 
1.9.1

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  reply	other threads:[~2020-01-27 19:19 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-27 19:18 [PATCHv2 1/2] dt-bindings: ath10k: Add new dt entries to identify coex support Tamizh Chelvam
2020-01-27 19:18 ` Tamizh Chelvam
2020-01-27 19:18 ` Tamizh Chelvam [this message]
2020-01-27 19:18   ` [PATCHv2 2/2] ath10k: Add support to read btcoex related data from DT Tamizh Chelvam
2020-02-05 17:49 ` [PATCHv2 1/2] dt-bindings: ath10k: Add new dt entries to identify coex support Rob Herring
2020-02-05 17:49   ` Rob Herring
2020-02-11 14:23 ` Kalle Valo
2020-02-11 14:23 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1580152736-18654-2-git-send-email-tamizhr@codeaurora.org \
    --to=tamizhr@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.