All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rakesh Pillai <pillair@codeaurora.org>
To: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	Rakesh Pillai <pillair@codeaurora.org>
Subject: [PATCH v6] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
Date: Tue,  4 Feb 2020 18:48:20 +0530	[thread overview]
Message-ID: <1580822300-4491-1-git-send-email-pillair@codeaurora.org> (raw)

Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on sc7180 soc.

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts |  5 +++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi    | 27 +++++++++++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 388f50a..167f68ac 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -287,6 +287,11 @@
 	vdda-pll-supply = <&vreg_l4a_0p8>;
 };
 
+&wifi {
+	status = "okay";
+	qcom,msa-fixed-perm;
+};
+
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
 &qspi_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 8011c5f..e3e8610 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -75,6 +75,11 @@
 			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
+
+		wlan_fw_mem: memory@93900000 {
+			reg = <0 0x93900000 0 0x200000>;
+			no-map;
+		};
 	};
 
 	cpus {
@@ -1490,6 +1495,28 @@
 
 			#freq-domain-cells = <1>;
 		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			iommus = <&apps_smmu 0xc0 0x1>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+			memory-region = <&wlan_fw_mem>;
+			status = "disabled";
+		};
 	};
 
 	thermal-zones {
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Rakesh Pillai <pillair@codeaurora.org>
To: devicetree@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org,
	Rakesh Pillai <pillair@codeaurora.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
Date: Tue,  4 Feb 2020 18:48:20 +0530	[thread overview]
Message-ID: <1580822300-4491-1-git-send-email-pillair@codeaurora.org> (raw)

Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on sc7180 soc.

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts |  5 +++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi    | 27 +++++++++++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 388f50a..167f68ac 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -287,6 +287,11 @@
 	vdda-pll-supply = <&vreg_l4a_0p8>;
 };
 
+&wifi {
+	status = "okay";
+	qcom,msa-fixed-perm;
+};
+
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
 &qspi_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 8011c5f..e3e8610 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -75,6 +75,11 @@
 			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
+
+		wlan_fw_mem: memory@93900000 {
+			reg = <0 0x93900000 0 0x200000>;
+			no-map;
+		};
 	};
 
 	cpus {
@@ -1490,6 +1495,28 @@
 
 			#freq-domain-cells = <1>;
 		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			iommus = <&apps_smmu 0xc0 0x1>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+			memory-region = <&wlan_fw_mem>;
+			status = "disabled";
+		};
 	};
 
 	thermal-zones {
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-02-04 13:21 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-04 13:18 Rakesh Pillai [this message]
2020-02-04 13:18 ` [PATCH v6] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node Rakesh Pillai
2020-02-07  6:41 ` Sibi Sankar
2020-02-07  6:41   ` Sibi Sankar
2020-03-24 17:39 ` Evan Green
2020-03-24 17:39   ` Evan Green
2020-03-25 11:04   ` pillair
2020-03-25 11:04     ` pillair
2020-03-25 16:03     ` Evan Green
2020-03-25 16:03       ` Evan Green
2020-03-26 11:23       ` pillair
2020-03-26 11:23         ` pillair

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1580822300-4491-1-git-send-email-pillair@codeaurora.org \
    --to=pillair@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.