From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: guaneryu@gmail.com, darrick.wong@oracle.com
Cc: linux-xfs@vger.kernel.org, fstests@vger.kernel.org
Subject: [PATCH 5/5] fsx: support 64-bit operation counts
Date: Tue, 04 Feb 2020 16:02:13 -0800 [thread overview]
Message-ID: <158086093318.1989378.1186256375919220733.stgit@magnolia> (raw)
In-Reply-To: <158086090225.1989378.6869317139530865842.stgit@magnolia>
From: Darrick J. Wong <darrick.wong@oracle.com>
Support 64-bit operation counts so that we can run long-soak tests for
more than 2 billion fsxops.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
ltp/fsx.c | 54 ++++++++++++++++++++++++++++--------------------------
1 file changed, 28 insertions(+), 26 deletions(-)
diff --git a/ltp/fsx.c b/ltp/fsx.c
index 120f4374..02403720 100644
--- a/ltp/fsx.c
+++ b/ltp/fsx.c
@@ -135,12 +135,12 @@ int fd; /* fd for our test file */
blksize_t block_size = 0;
off_t file_size = 0;
off_t biggest = 0;
-unsigned long testcalls = 0; /* calls to function "test" */
+long long testcalls = 0; /* calls to function "test" */
-unsigned long simulatedopcount = 0; /* -b flag */
+long long simulatedopcount = 0; /* -b flag */
int closeprob = 0; /* -c flag */
int debug = 0; /* -d flag */
-unsigned long debugstart = 0; /* -D flag */
+long long debugstart = 0; /* -D flag */
char filldata = 0; /* -g flag */
int flush = 0; /* -f flag */
int do_fsync = 0; /* -y flag */
@@ -148,7 +148,7 @@ unsigned long maxfilelen = 256 * 1024; /* -l flag */
int sizechecks = 1; /* -n flag disables them */
int maxoplen = 64 * 1024; /* -o flag */
int quiet = 0; /* -q flag */
-unsigned long progressinterval = 0; /* -p flag */
+long long progressinterval = 0; /* -p flag */
int readbdy = 1; /* -r flag */
int style = 0; /* -s flag */
int prealloc = 0; /* -x flag */
@@ -157,7 +157,7 @@ int writebdy = 1; /* -w flag */
long monitorstart = -1; /* -m flag */
long monitorend = -1; /* -m flag */
int lite = 0; /* -L flag */
-long numops = -1; /* -N flag */
+long long numops = -1; /* -N flag */
int randomoplen = 1; /* -O flag disables it */
int seed = 1; /* -S flag */
int mapped_writes = 1; /* -W flag disables */
@@ -788,7 +788,7 @@ doread(unsigned offset, unsigned size)
(monitorstart == -1 ||
(offset + size > monitorstart &&
(monitorend == -1 || offset <= monitorend))))))
- prt("%lu read\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
+ prt("%lld read\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
offset, offset + size - 1, size);
ret = lseek(fd, (off_t)offset, SEEK_SET);
if (ret == (off_t)-1) {
@@ -925,7 +925,7 @@ domapread(unsigned offset, unsigned size)
(monitorstart == -1 ||
(offset + size > monitorstart &&
(monitorend == -1 || offset <= monitorend))))))
- prt("%lu mapread\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
+ prt("%lld mapread\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
offset, offset + size - 1, size);
pg_offset = offset & PAGE_MASK;
@@ -1003,7 +1003,7 @@ dowrite(unsigned offset, unsigned size)
(monitorstart == -1 ||
(offset + size > monitorstart &&
(monitorend == -1 || offset <= monitorend))))))
- prt("%lu write\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
+ prt("%lld write\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
offset, offset + size - 1, size);
ret = lseek(fd, (off_t)offset, SEEK_SET);
if (ret == (off_t)-1) {
@@ -1070,7 +1070,7 @@ domapwrite(unsigned offset, unsigned size)
(monitorstart == -1 ||
(offset + size > monitorstart &&
(monitorend == -1 || offset <= monitorend))))))
- prt("%lu mapwrite\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
+ prt("%lld mapwrite\t0x%x thru\t0x%x\t(0x%x bytes)\n", testcalls,
offset, offset + size - 1, size);
if (file_size > cur_filesize) {
@@ -1123,11 +1123,12 @@ dotruncate(unsigned size)
if (testcalls <= simulatedopcount)
return;
-
+
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
size <= monitorend)))
- prt("%lu trunc\tfrom 0x%x to 0x%x\n", testcalls, oldsize, size);
+ prt("%lld trunc\tfrom 0x%x to 0x%x\n", testcalls, oldsize,
+ size);
if (ftruncate(fd, (off_t)size) == -1) {
prt("ftruncate1: %x\n", size);
prterr("dotruncate: ftruncate");
@@ -1168,7 +1169,7 @@ do_punch_hole(unsigned offset, unsigned length)
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
end_offset <= monitorend))) {
- prt("%lu punch\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
+ prt("%lld punch\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
offset, offset+length, length);
}
if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
@@ -1230,7 +1231,7 @@ do_zero_range(unsigned offset, unsigned length, int keep_size)
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
end_offset <= monitorend))) {
- prt("%lu zero\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
+ prt("%lld zero\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
offset, offset+length, length);
}
if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
@@ -1280,8 +1281,8 @@ do_collapse_range(unsigned offset, unsigned length)
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
end_offset <= monitorend))) {
- prt("%lu collapse\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
- offset, offset+length, length);
+ prt("%lld collapse\tfrom 0x%x to 0x%x, (0x%x bytes)\n",
+ testcalls, offset, offset+length, length);
}
if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
prt("collapse range: 0x%x to 0x%x\n", offset, offset + length);
@@ -1332,7 +1333,7 @@ do_insert_range(unsigned offset, unsigned length)
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
end_offset <= monitorend))) {
- prt("%lu insert\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
+ prt("%lld insert\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
offset, offset+length, length);
}
if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
@@ -1724,7 +1725,7 @@ do_preallocate(unsigned offset, unsigned length, int keep_size)
if ((progressinterval && testcalls % progressinterval == 0) ||
(debug && (monitorstart == -1 || monitorend == -1 ||
end_offset <= monitorend)))
- prt("%lu falloc\tfrom 0x%x to 0x%x (0x%x bytes)\n", testcalls,
+ prt("%lld falloc\tfrom 0x%x to 0x%x (0x%x bytes)\n", testcalls,
offset, offset + length, length);
if (fallocate(fd, keep_size ? FALLOC_FL_KEEP_SIZE : 0, (loff_t)offset, (loff_t)length) == -1) {
prt("fallocate: 0x%x to 0x%x\n", offset, offset + length);
@@ -1773,7 +1774,7 @@ docloseopen(void)
return;
if (debug)
- prt("%lu close/open\n", testcalls);
+ prt("%lld close/open\n", testcalls);
if (close(fd)) {
prterr("docloseopen: close");
report_failure(180);
@@ -1797,7 +1798,7 @@ dofsync(void)
if (testcalls <= simulatedopcount)
return;
if (debug)
- prt("%lu fsync\n", testcalls);
+ prt("%lld fsync\n", testcalls);
log4(OP_FSYNC, 0, 0, 0);
ret = fsync(fd);
if (ret < 0) {
@@ -1834,7 +1835,7 @@ cleanup(int sig)
{
if (sig)
prt("signal %d\n", sig);
- prt("testcalls = %lu\n", testcalls);
+ prt("testcalls = %lld\n", testcalls);
exit(sig);
}
@@ -1942,7 +1943,7 @@ test(void)
debug = 1;
if (!quiet && testcalls < simulatedopcount && testcalls % 100000 == 0)
- prt("%lu...\n", testcalls);
+ prt("%lld...\n", testcalls);
if (replayopsf) {
struct log_entry log_entry;
@@ -2293,13 +2294,13 @@ usage(void)
}
-int
+long long
getnum(char *s, char **e)
{
- int ret;
+ long long ret;
*e = (char *) 0;
- ret = strtol(s, e, 0);
+ ret = strtoll(s, e, 0);
if (*e)
switch (**e) {
case 'b':
@@ -2487,7 +2488,8 @@ main(int argc, char **argv)
case 'b':
simulatedopcount = getnum(optarg, &endp);
if (!quiet)
- prt("Will begin at operation %ld\n", simulatedopcount);
+ prt("Will begin at operation %lld\n",
+ simulatedopcount);
if (simulatedopcount == 0)
usage();
simulatedopcount -= 1;
@@ -2854,7 +2856,7 @@ main(int argc, char **argv)
prterr("close");
report_failure(99);
}
- prt("All %lu operations completed A-OK!\n", testcalls);
+ prt("All %lld operations completed A-OK!\n", testcalls);
if (recordops)
logdump();
next prev parent reply other threads:[~2020-02-05 0:02 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-05 0:01 [PATCH 0/5] fstests: random fixes Darrick J. Wong
2020-02-05 0:01 ` [PATCH 1/5] xfs/449: filter out "Discarding..." from output Darrick J. Wong
2020-02-06 4:44 ` Zorro Lang
2020-02-05 0:01 ` [PATCH 2/5] xfs/020: fix truncation test Darrick J. Wong
2020-02-06 4:44 ` Zorro Lang
2020-02-05 0:02 ` [PATCH 3/5] generic/402: skip test if xfs_io can't parse the date value Darrick J. Wong
2020-02-05 6:55 ` Amir Goldstein
2020-02-09 15:29 ` Eryu Guan
2020-02-11 15:20 ` Darrick J. Wong
2020-02-05 0:02 ` [PATCH 4/5] xfs/117: fix inode corruption loop Darrick J. Wong
2020-02-06 4:50 ` Zorro Lang
2020-02-05 0:02 ` Darrick J. Wong [this message]
2020-02-06 4:57 ` [PATCH 5/5] fsx: support 64-bit operation counts Zorro Lang
2020-02-06 17:51 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=158086093318.1989378.1186256375919220733.stgit@magnolia \
--to=darrick.wong@oracle.com \
--cc=fstests@vger.kernel.org \
--cc=guaneryu@gmail.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.