From: peng.fan@nxp.com To: sboyd@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com, abel.vesa@nxp.com, leonard.crestez@nxp.com Cc: kernel@pengutronix.de, linux-imx@nxp.com, aisheng.dong@nxp.com, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, anson.huang@nxp.com, ping.bai@nxp.com, l.stach@pengutronix.de, Peng Fan <peng.fan@nxp.com> Subject: [PATCH RESEND v3 4/4] clk: imx: imx8mp: fix a53 cpu clock Date: Wed, 19 Feb 2020 18:17:09 +0800 [thread overview] Message-ID: <1582107429-21123-5-git-send-email-peng.fan@nxp.com> (raw) In-Reply-To: <1582107429-21123-1-git-send-email-peng.fan@nxp.com> From: Peng Fan <peng.fan@nxp.com> The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root signoff timing is 1Ghz, however the A53 core which sources from CCM root could run above 1GHz which voilates the CCM. There is a CORE_SEL slice before A53 core, we need configure the CORE_SEL slice source from ARM PLL, not A53 CCM clk root. The A53 CCM clk root should only be used when need to change ARM PLL frequency. Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out. Configure a53 ccm root sources from 800MHz sys pll Configure a53 core sources from arm_pll_out Mark arm_a53_core as critical clk Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> --- drivers/clk/imx/clk-imx8mp.c | 16 ++++++++++++---- include/dt-bindings/clock/imx8mp-clock.h | 3 ++- 2 files changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c index a16af4fce044..d67ee36b84de 100644 --- a/drivers/clk/imx/clk-imx8mp.c +++ b/drivers/clk/imx/clk-imx8mp.c @@ -34,6 +34,8 @@ static const char * const imx8mp_a53_sels[] = {"osc_24m", "arm_pll_out", "sys_pl "sys_pll2_1000m", "sys_pll1_800m", "sys_pll1_400m", "audio_pll1_out", "sys_pll3_out", }; +static const char * const imx8mp_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", }; + static const char * const imx8mp_m7_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll2_250m", "vpu_pll_out", "sys_pll1_800m", "audio_pll1_out", "video_pll1_out", "sys_pll3_out", }; @@ -554,6 +556,9 @@ static int imx8mp_clocks_probe(struct platform_device *pdev) hws[IMX8MP_CLK_HSIO_AXI_DIV] = imx_clk_hw_divider2("hsio_axi_div", "hsio_axi_cg", ccm_base + 0x8380, 0, 3); hws[IMX8MP_CLK_MEDIA_ISP_DIV] = imx_clk_hw_divider2("media_isp_div", "media_isp_cg", ccm_base + 0x8400, 0, 3); + /* CORE SEL */ + hws[IMX8MP_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", ccm_base + 0x9880, 24, 1, imx8mp_a53_core_sels, ARRAY_SIZE(imx8mp_a53_core_sels), CLK_IS_CRITICAL); + hws[IMX8MP_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mp_main_axi_sels, ccm_base + 0x8800); hws[IMX8MP_CLK_ENET_AXI] = imx8m_clk_hw_composite("enet_axi", imx8mp_enet_axi_sels, ccm_base + 0x8880); hws[IMX8MP_CLK_NAND_USDHC_BUS] = imx8m_clk_hw_composite_critical("nand_usdhc_bus", imx8mp_nand_usdhc_sels, ccm_base + 0x8900); @@ -724,11 +729,14 @@ static int imx8mp_clocks_probe(struct platform_device *pdev) hws[IMX8MP_CLK_VPU_ROOT] = imx_clk_hw_gate4("vpu_root_clk", "vpu_bus", ccm_base + 0x4630, 0); hws[IMX8MP_CLK_AUDIO_ROOT] = imx_clk_hw_gate4("audio_root_clk", "ipg_root", ccm_base + 0x4650, 0); - hws[IMX8MP_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_div", - hws[IMX8MP_CLK_A53_DIV]->clk, - hws[IMX8MP_CLK_A53_SRC]->clk, + clk_hw_set_parent(hws[IMX8MP_CLK_A53_SRC], hws[IMX8MP_SYS_PLL1_800M]); + clk_hw_set_parent(hws[IMX8MP_CLK_A53_CORE], hws[IMX8MP_ARM_PLL_OUT]); + + hws[IMX8MP_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core", + hws[IMX8MP_CLK_A53_CORE]->clk, + hws[IMX8MP_CLK_A53_CORE]->clk, hws[IMX8MP_ARM_PLL_OUT]->clk, - hws[IMX8MP_SYS_PLL1_800M]->clk); + hws[IMX8MP_CLK_A53_DIV]->clk); imx_check_clk_hws(hws, IMX8MP_CLK_END); diff --git a/include/dt-bindings/clock/imx8mp-clock.h b/include/dt-bindings/clock/imx8mp-clock.h index 2fab63186bca..c92d1f4117eb 100644 --- a/include/dt-bindings/clock/imx8mp-clock.h +++ b/include/dt-bindings/clock/imx8mp-clock.h @@ -294,7 +294,8 @@ #define IMX8MP_CLK_DRAM_ALT_ROOT 285 #define IMX8MP_CLK_DRAM_CORE 286 #define IMX8MP_CLK_ARM 287 +#define IMX8MP_CLK_A53_CORE 288 -#define IMX8MP_CLK_END 288 +#define IMX8MP_CLK_END 289 #endif -- 2.16.4
WARNING: multiple messages have this Message-ID (diff)
From: peng.fan@nxp.com To: sboyd@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com, abel.vesa@nxp.com, leonard.crestez@nxp.com Cc: aisheng.dong@nxp.com, Peng Fan <peng.fan@nxp.com>, ping.bai@nxp.com, anson.huang@nxp.com, linux-kernel@vger.kernel.org, linux-imx@nxp.com, kernel@pengutronix.de, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, l.stach@pengutronix.de Subject: [PATCH RESEND v3 4/4] clk: imx: imx8mp: fix a53 cpu clock Date: Wed, 19 Feb 2020 18:17:09 +0800 [thread overview] Message-ID: <1582107429-21123-5-git-send-email-peng.fan@nxp.com> (raw) In-Reply-To: <1582107429-21123-1-git-send-email-peng.fan@nxp.com> From: Peng Fan <peng.fan@nxp.com> The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root signoff timing is 1Ghz, however the A53 core which sources from CCM root could run above 1GHz which voilates the CCM. There is a CORE_SEL slice before A53 core, we need configure the CORE_SEL slice source from ARM PLL, not A53 CCM clk root. The A53 CCM clk root should only be used when need to change ARM PLL frequency. Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out. Configure a53 ccm root sources from 800MHz sys pll Configure a53 core sources from arm_pll_out Mark arm_a53_core as critical clk Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> --- drivers/clk/imx/clk-imx8mp.c | 16 ++++++++++++---- include/dt-bindings/clock/imx8mp-clock.h | 3 ++- 2 files changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c index a16af4fce044..d67ee36b84de 100644 --- a/drivers/clk/imx/clk-imx8mp.c +++ b/drivers/clk/imx/clk-imx8mp.c @@ -34,6 +34,8 @@ static const char * const imx8mp_a53_sels[] = {"osc_24m", "arm_pll_out", "sys_pl "sys_pll2_1000m", "sys_pll1_800m", "sys_pll1_400m", "audio_pll1_out", "sys_pll3_out", }; +static const char * const imx8mp_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", }; + static const char * const imx8mp_m7_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll2_250m", "vpu_pll_out", "sys_pll1_800m", "audio_pll1_out", "video_pll1_out", "sys_pll3_out", }; @@ -554,6 +556,9 @@ static int imx8mp_clocks_probe(struct platform_device *pdev) hws[IMX8MP_CLK_HSIO_AXI_DIV] = imx_clk_hw_divider2("hsio_axi_div", "hsio_axi_cg", ccm_base + 0x8380, 0, 3); hws[IMX8MP_CLK_MEDIA_ISP_DIV] = imx_clk_hw_divider2("media_isp_div", "media_isp_cg", ccm_base + 0x8400, 0, 3); + /* CORE SEL */ + hws[IMX8MP_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", ccm_base + 0x9880, 24, 1, imx8mp_a53_core_sels, ARRAY_SIZE(imx8mp_a53_core_sels), CLK_IS_CRITICAL); + hws[IMX8MP_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mp_main_axi_sels, ccm_base + 0x8800); hws[IMX8MP_CLK_ENET_AXI] = imx8m_clk_hw_composite("enet_axi", imx8mp_enet_axi_sels, ccm_base + 0x8880); hws[IMX8MP_CLK_NAND_USDHC_BUS] = imx8m_clk_hw_composite_critical("nand_usdhc_bus", imx8mp_nand_usdhc_sels, ccm_base + 0x8900); @@ -724,11 +729,14 @@ static int imx8mp_clocks_probe(struct platform_device *pdev) hws[IMX8MP_CLK_VPU_ROOT] = imx_clk_hw_gate4("vpu_root_clk", "vpu_bus", ccm_base + 0x4630, 0); hws[IMX8MP_CLK_AUDIO_ROOT] = imx_clk_hw_gate4("audio_root_clk", "ipg_root", ccm_base + 0x4650, 0); - hws[IMX8MP_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_div", - hws[IMX8MP_CLK_A53_DIV]->clk, - hws[IMX8MP_CLK_A53_SRC]->clk, + clk_hw_set_parent(hws[IMX8MP_CLK_A53_SRC], hws[IMX8MP_SYS_PLL1_800M]); + clk_hw_set_parent(hws[IMX8MP_CLK_A53_CORE], hws[IMX8MP_ARM_PLL_OUT]); + + hws[IMX8MP_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core", + hws[IMX8MP_CLK_A53_CORE]->clk, + hws[IMX8MP_CLK_A53_CORE]->clk, hws[IMX8MP_ARM_PLL_OUT]->clk, - hws[IMX8MP_SYS_PLL1_800M]->clk); + hws[IMX8MP_CLK_A53_DIV]->clk); imx_check_clk_hws(hws, IMX8MP_CLK_END); diff --git a/include/dt-bindings/clock/imx8mp-clock.h b/include/dt-bindings/clock/imx8mp-clock.h index 2fab63186bca..c92d1f4117eb 100644 --- a/include/dt-bindings/clock/imx8mp-clock.h +++ b/include/dt-bindings/clock/imx8mp-clock.h @@ -294,7 +294,8 @@ #define IMX8MP_CLK_DRAM_ALT_ROOT 285 #define IMX8MP_CLK_DRAM_CORE 286 #define IMX8MP_CLK_ARM 287 +#define IMX8MP_CLK_A53_CORE 288 -#define IMX8MP_CLK_END 288 +#define IMX8MP_CLK_END 289 #endif -- 2.16.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-19 10:23 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-19 10:17 [PATCH RESEND v3 0/4] clk: imx: imx8m: fix a53 cpu clock peng.fan 2020-02-19 10:17 ` peng.fan 2020-02-19 10:17 ` [PATCH RESEND v3 1/4] clk: imx: imx8mq: " peng.fan 2020-02-19 10:17 ` peng.fan 2020-03-10 19:38 ` Leonard Crestez 2020-03-10 19:38 ` Leonard Crestez 2020-03-10 19:38 ` Leonard Crestez 2020-03-11 1:16 ` Peng Fan 2020-03-11 1:16 ` Peng Fan 2020-03-11 1:16 ` Peng Fan 2020-03-25 12:25 ` Leonard Crestez 2020-03-25 12:25 ` Leonard Crestez 2020-03-25 12:27 ` Peng Fan 2020-03-25 12:27 ` Peng Fan 2020-02-19 10:17 ` [PATCH RESEND v3 2/4] clk: imx: imx8mm: " peng.fan 2020-02-19 10:17 ` peng.fan 2020-02-19 10:17 ` [PATCH RESEND v3 3/4] clk: imx: imx8mn: " peng.fan 2020-02-19 10:17 ` peng.fan 2020-02-19 10:17 ` peng.fan [this message] 2020-02-19 10:17 ` [PATCH RESEND v3 4/4] clk: imx: imx8mp: " peng.fan 2020-02-24 1:13 ` Peng Fan 2020-02-24 1:13 ` Peng Fan 2020-02-24 3:39 ` [PATCH RESEND v3 0/4] clk: imx: imx8m: " Shawn Guo 2020-02-24 3:39 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1582107429-21123-5-git-send-email-peng.fan@nxp.com \ --to=peng.fan@nxp.com \ --cc=abel.vesa@nxp.com \ --cc=aisheng.dong@nxp.com \ --cc=anson.huang@nxp.com \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=l.stach@pengutronix.de \ --cc=leonard.crestez@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=ping.bai@nxp.com \ --cc=s.hauer@pengutronix.de \ --cc=sboyd@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.