From: Li Yang <leoyang.li@nxp.com>
To: shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>
Subject: [PATCH 13/15] arm64: defconfig: Enable RTC devices for QorIQ boards
Date: Mon, 24 Feb 2020 17:08:08 -0600 [thread overview]
Message-ID: <1582585690-463-14-git-send-email-leoyang.li@nxp.com> (raw)
In-Reply-To: <1582585690-463-1-git-send-email-leoyang.li@nxp.com>
Enables the RTC devices used on QorIQ reference boards supported in
mainline kernel.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/configs/defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f0d75bbaac80..b092adecf724 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -692,11 +692,14 @@ CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_EDAC=y
CONFIG_EDAC_GHES=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_RK808=m
+CONFIG_RTC_DRV_PCF85363=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_CROS_EC=y
CONFIG_RTC_DRV_S3C=y
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Li Yang <leoyang.li@nxp.com>
To: shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>
Subject: [PATCH 13/15] arm64: defconfig: Enable RTC devices for QorIQ boards
Date: Mon, 24 Feb 2020 17:08:08 -0600 [thread overview]
Message-ID: <1582585690-463-14-git-send-email-leoyang.li@nxp.com> (raw)
In-Reply-To: <1582585690-463-1-git-send-email-leoyang.li@nxp.com>
Enables the RTC devices used on QorIQ reference boards supported in
mainline kernel.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/configs/defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f0d75bbaac80..b092adecf724 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -692,11 +692,14 @@ CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_EDAC=y
CONFIG_EDAC_GHES=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_RK808=m
+CONFIG_RTC_DRV_PCF85363=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_CROS_EC=y
CONFIG_RTC_DRV_S3C=y
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-24 23:08 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-24 23:07 [PATCH 00/15] Enable drivers for NXP/FSL QorIQ arm64 boards Li Yang
2020-02-24 23:07 ` Li Yang
2020-02-24 23:07 ` [PATCH 01/15] arm64: defconfig: run through savedefconfig for ordering Li Yang
2020-02-24 23:07 ` Li Yang
2020-02-24 23:07 ` [PATCH 02/15] arm64: defconfig: Enable NXP flexcan driver Li Yang
2020-02-24 23:07 ` Li Yang
2020-02-24 23:07 ` [PATCH 03/15] arm64: defconfig: Enable QorIQ DPAA1 drivers Li Yang
2020-02-24 23:07 ` Li Yang
2020-02-24 23:07 ` [PATCH 04/15] arm64: defconfig: Enable QorIQ DPAA2 drivers Li Yang
2020-02-24 23:07 ` Li Yang
2020-02-24 23:08 ` [PATCH 05/15] arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch Li Yang
2020-02-24 23:08 ` Li Yang
2020-02-24 23:08 ` [PATCH 06/15] arm64: defconfig: Enable NXP/FSL SPI controller drivers Li Yang
2020-02-24 23:08 ` Li Yang
2020-03-11 5:51 ` Shawn Guo
2020-03-11 5:51 ` Shawn Guo
[not found] ` <CADRPPNQ-VWmVMdBuEUj9RdXAYvt4dhy+scP-EaYbrXj3McSaVQ@mail.gmail.com>
2020-03-11 7:06 ` Shawn Guo
2020-03-11 7:06 ` Shawn Guo
2020-02-24 23:08 ` [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver Li Yang
2020-02-24 23:08 ` Li Yang
2020-03-11 6:12 ` Shawn Guo
2020-03-11 6:12 ` Shawn Guo
2020-03-11 18:54 ` Leo Li
2020-03-11 18:54 ` Leo Li
2020-03-12 14:22 ` Shawn Guo
2020-03-12 14:22 ` Shawn Guo
2020-03-12 16:31 ` Leo Li
2020-03-12 16:31 ` Leo Li
2020-02-24 23:08 ` [PATCH 08/15] arm64: defconfig: Enable ARM SBSA watchdog driver Li Yang
2020-02-24 23:08 ` Li Yang
2020-02-24 23:08 ` [PATCH 09/15] arm64: defconfig: Enable QorIQ IFC NAND controller driver Li Yang
2020-02-24 23:08 ` Li Yang
2020-03-11 6:13 ` Shawn Guo
2020-03-11 6:13 ` Shawn Guo
2020-03-11 18:55 ` Leo Li
2020-03-11 18:55 ` Leo Li
2020-02-24 23:08 ` [PATCH 10/15] arm64: defconfig: Enable QorIQ GPIO driver Li Yang
2020-02-24 23:08 ` Li Yang
2020-02-24 23:08 ` [PATCH 11/15] arm64: defconfig: Enable ARM Mali display driver Li Yang
2020-02-24 23:08 ` Li Yang
2020-02-24 23:08 ` [PATCH 12/15] arm64: defconfig: Enable flash device drivers for QorIQ boards Li Yang
2020-02-24 23:08 ` Li Yang
2020-02-24 23:08 ` Li Yang [this message]
2020-02-24 23:08 ` [PATCH 13/15] arm64: defconfig: Enable RTC devices " Li Yang
2020-02-24 23:08 ` [PATCH 14/15] arm64: defconfig: Enable PHY devices used on " Li Yang
2020-02-24 23:08 ` Li Yang
2020-02-24 23:08 ` [PATCH 15/15] arm64: defconfig: Enable e1000 device Li Yang
2020-02-24 23:08 ` Li Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1582585690-463-14-git-send-email-leoyang.li@nxp.com \
--to=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.