All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Garry <john.garry@huawei.com>
To: <axboe@kernel.dk>, <jejb@linux.ibm.com>,
	<martin.petersen@oracle.com>, <ming.lei@redhat.com>,
	<bvanassche@acm.org>, <hare@suse.de>, <don.brace@microsemi.com>,
	<sumit.saxena@broadcom.com>, <hch@infradead.org>,
	<kashyap.desai@broadcom.com>,
	<shivasharan.srikanteshwara@broadcom.com>
Cc: <chenxiang66@hisilicon.com>, <linux-block@vger.kernel.org>,
	<linux-scsi@vger.kernel.org>, <esc.storagedev@microsemi.com>,
	John Garry <john.garry@huawei.com>
Subject: [PATCH RFC v6 07/10] scsi: hisi_sas: Switch v3 hw to MQ
Date: Thu, 5 Mar 2020 19:54:37 +0800	[thread overview]
Message-ID: <1583409280-158604-8-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1583409280-158604-1-git-send-email-john.garry@huawei.com>

Now that the block layer provides a shared tag, we can switch the driver
to expose all HW queues.

Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  3 +-
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 36 ++++++-----
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 87 +++++++++++---------------
 3 files changed, 56 insertions(+), 70 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 2bdd64648ef0..e6acbf940712 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -8,6 +8,8 @@
 #define _HISI_SAS_H_
 
 #include <linux/acpi.h>
+#include <linux/blk-mq.h>
+#include <linux/blk-mq-pci.h>
 #include <linux/clk.h>
 #include <linux/debugfs.h>
 #include <linux/dmapool.h>
@@ -431,7 +433,6 @@ struct hisi_hba {
 	u32 intr_coal_count;	/* Interrupt count to coalesce */
 
 	int cq_nvecs;
-	unsigned int *reply_map;
 
 	/* bist */
 	enum sas_linkrate debugfs_bist_linkrate;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 9a6deb21fe4d..3dbf6c27dd64 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -417,6 +417,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	struct device *dev = hisi_hba->dev;
 	int dlvry_queue_slot, dlvry_queue, rc, slot_idx;
 	int n_elem = 0, n_elem_dif = 0, n_elem_req = 0;
+	struct scsi_cmnd *scmd = NULL;
 	struct hisi_sas_dq *dq;
 	unsigned long flags;
 	int wr_q_index;
@@ -432,10 +433,23 @@ static int hisi_sas_task_prep(struct sas_task *task,
 		return -ECOMM;
 	}
 
-	if (hisi_hba->reply_map) {
-		int cpu = raw_smp_processor_id();
-		unsigned int dq_index = hisi_hba->reply_map[cpu];
+	if (task->uldd_task) {
+		struct ata_queued_cmd *qc;
 
+		if (dev_is_sata(device)) {
+			qc = task->uldd_task;
+			scmd = qc->scsicmd;
+		} else {
+			scmd = task->uldd_task;
+		}
+	}
+
+	if (scmd) {
+		unsigned int dq_index;
+		u32 blk_tag;
+
+		blk_tag = blk_mq_unique_tag(scmd->request);
+		dq_index = blk_mq_unique_tag_to_hwq(blk_tag);
 		*dq_pointer = dq = &hisi_hba->dq[dq_index];
 	} else {
 		*dq_pointer = dq = sas_dev->dq;
@@ -464,21 +478,9 @@ static int hisi_sas_task_prep(struct sas_task *task,
 
 	if (hisi_hba->hw->slot_index_alloc)
 		rc = hisi_hba->hw->slot_index_alloc(hisi_hba, device);
-	else {
-		struct scsi_cmnd *scsi_cmnd = NULL;
-
-		if (task->uldd_task) {
-			struct ata_queued_cmd *qc;
+	else
+		rc = hisi_sas_slot_index_alloc(hisi_hba, scmd);
 
-			if (dev_is_sata(device)) {
-				qc = task->uldd_task;
-				scsi_cmnd = qc->scsicmd;
-			} else {
-				scsi_cmnd = task->uldd_task;
-			}
-		}
-		rc  = hisi_sas_slot_index_alloc(hisi_hba, scsi_cmnd);
-	}
 	if (rc < 0)
 		goto err_out_dif_dma_unmap;
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index a2debe0c8185..9d421c2ddce4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2360,68 +2360,36 @@ static irqreturn_t cq_interrupt_v3_hw(int irq_no, void *p)
 	return IRQ_WAKE_THREAD;
 }
 
-static void setup_reply_map_v3_hw(struct hisi_hba *hisi_hba, int nvecs)
+static int interrupt_preinit_v3_hw(struct hisi_hba *hisi_hba)
 {
-	const struct cpumask *mask;
-	int queue, cpu;
+	int vectors;
+	int max_msi = HISI_SAS_MSI_COUNT_V3_HW, min_msi;
+	struct Scsi_Host *shost = hisi_hba->shost;
+	struct irq_affinity desc = {
+		.pre_vectors = BASE_VECTORS_V3_HW,
+	};
 
-	for (queue = 0; queue < nvecs; queue++) {
-		struct hisi_sas_cq *cq = &hisi_hba->cq[queue];
+	min_msi = MIN_AFFINE_VECTORS_V3_HW;
+	vectors = pci_alloc_irq_vectors_affinity(hisi_hba->pci_dev,
+						 min_msi, max_msi,
+						 PCI_IRQ_MSI |
+						 PCI_IRQ_AFFINITY,
+						 &desc);
+	if (vectors < 0)
+		return -ENOENT;
 
-		mask = pci_irq_get_affinity(hisi_hba->pci_dev, queue +
-					    BASE_VECTORS_V3_HW);
-		if (!mask)
-			goto fallback;
-		cq->irq_mask = mask;
-		for_each_cpu(cpu, mask)
-			hisi_hba->reply_map[cpu] = queue;
-	}
-	return;
 
-fallback:
-	for_each_possible_cpu(cpu)
-		hisi_hba->reply_map[cpu] = cpu % hisi_hba->queue_count;
-	/* Don't clean all CQ masks */
+	hisi_hba->cq_nvecs = vectors - BASE_VECTORS_V3_HW;
+	shost->nr_hw_queues = hisi_hba->cq_nvecs;
+
+	return 0;
 }
 
 static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
 {
 	struct device *dev = hisi_hba->dev;
 	struct pci_dev *pdev = hisi_hba->pci_dev;
-	int vectors, rc, i;
-	int max_msi = HISI_SAS_MSI_COUNT_V3_HW, min_msi;
-
-	if (auto_affine_msi_experimental) {
-		struct irq_affinity desc = {
-			.pre_vectors = BASE_VECTORS_V3_HW,
-		};
-
-		dev_info(dev, "Enable MSI auto-affinity\n");
-
-		min_msi = MIN_AFFINE_VECTORS_V3_HW;
-
-		hisi_hba->reply_map = devm_kcalloc(dev, nr_cpu_ids,
-						   sizeof(unsigned int),
-						   GFP_KERNEL);
-		if (!hisi_hba->reply_map)
-			return -ENOMEM;
-		vectors = pci_alloc_irq_vectors_affinity(hisi_hba->pci_dev,
-							 min_msi, max_msi,
-							 PCI_IRQ_MSI |
-							 PCI_IRQ_AFFINITY,
-							 &desc);
-		if (vectors < 0)
-			return -ENOENT;
-		setup_reply_map_v3_hw(hisi_hba, vectors - BASE_VECTORS_V3_HW);
-	} else {
-		min_msi = max_msi;
-		vectors = pci_alloc_irq_vectors(hisi_hba->pci_dev, min_msi,
-						max_msi, PCI_IRQ_MSI);
-		if (vectors < 0)
-			return vectors;
-	}
-
-	hisi_hba->cq_nvecs = vectors - BASE_VECTORS_V3_HW;
+	int rc, i;
 
 	rc = devm_request_irq(dev, pci_irq_vector(pdev, 1),
 			      int_phy_up_down_bcast_v3_hw, 0,
@@ -3068,6 +3036,15 @@ static int debugfs_set_bist_v3_hw(struct hisi_hba *hisi_hba, bool enable)
 	return 0;
 }
 
+static int hisi_sas_map_queues(struct Scsi_Host *shost)
+{
+	struct hisi_hba *hisi_hba = shost_priv(shost);
+	struct blk_mq_queue_map *qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT];
+
+	return blk_mq_pci_map_queues(qmap, hisi_hba->pci_dev,
+				     BASE_VECTORS_V3_HW);
+}
+
 static struct scsi_host_template sht_v3_hw = {
 	.name			= DRV_NAME,
 	.module			= THIS_MODULE,
@@ -3076,6 +3053,7 @@ static struct scsi_host_template sht_v3_hw = {
 	.slave_configure	= hisi_sas_slave_configure,
 	.scan_finished		= hisi_sas_scan_finished,
 	.scan_start		= hisi_sas_scan_start,
+	.map_queues		= hisi_sas_map_queues,
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
@@ -3092,6 +3070,7 @@ static struct scsi_host_template sht_v3_hw = {
 	.shost_attrs		= host_attrs_v3_hw,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
 	.host_reset             = hisi_sas_host_reset,
+	.host_tagset		= 1,
 };
 
 static const struct hisi_sas_hw hisi_sas_v3_hw = {
@@ -3263,6 +3242,10 @@ hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (hisi_sas_debugfs_enable)
 		hisi_sas_debugfs_init(hisi_hba);
 
+	rc = interrupt_preinit_v3_hw(hisi_hba);
+	if (rc)
+		goto err_out_ha;
+	dev_err(dev, "%d hw qeues\n", shost->nr_hw_queues);
 	rc = scsi_add_host(shost, dev);
 	if (rc)
 		goto err_out_ha;
-- 
2.17.1


  parent reply	other threads:[~2020-03-05 11:59 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-05 11:54 [PATCH RFC v6 00/10] blk-mq/scsi: Provide hostwide shared tags for SCSI HBAs John Garry
2020-03-05 11:54 ` [PATCH RFC v6 01/10] blk-mq: rename BLK_MQ_F_TAG_SHARED as BLK_MQ_F_TAG_QUEUE_SHARED John Garry
2020-03-05 11:54 ` [PATCH RFC v6 02/10] blk-mq: rename blk_mq_update_tag_set_depth() John Garry
2020-03-05 11:54 ` [PATCH RFC v6 03/10] blk-mq: Use pointers for blk_mq_tags bitmap tags John Garry
2020-03-05 12:42   ` Hannes Reinecke
2020-03-05 11:54 ` [PATCH RFC v6 04/10] blk-mq: Facilitate a shared sbitmap per tagset John Garry
2020-03-05 12:49   ` Hannes Reinecke
2020-03-05 13:52     ` John Garry
2020-03-05 11:54 ` [PATCH RFC v6 05/10] blk-mq: Add support in hctx_tags_bitmap_show() for a shared sbitmap John Garry
2020-03-05 12:52   ` Hannes Reinecke
2020-03-05 11:54 ` [PATCH RFC v6 06/10] scsi: Add template flag 'host_tagset' John Garry
2020-03-06 11:12   ` John Garry
2020-03-05 11:54 ` John Garry [this message]
2020-03-05 12:52   ` [PATCH RFC v6 07/10] scsi: hisi_sas: Switch v3 hw to MQ Hannes Reinecke
2020-03-05 11:54 ` [PATCH RFC v6 08/10] megaraid_sas: switch fusion adapters " John Garry
2020-04-07 11:14   ` Kashyap Desai
2020-04-08  9:33     ` John Garry
2020-04-08  9:59       ` Kashyap Desai
2020-04-17 16:46         ` John Garry
2020-04-20 17:47           ` Kashyap Desai
2020-04-21 12:35             ` John Garry
2020-04-22 18:59               ` Kashyap Desai
2020-04-22 21:28                 ` John Garry
2020-04-23 16:31                   ` John Garry
2020-04-24 16:31                     ` Kashyap Desai
2020-04-27 17:06                       ` John Garry
2020-04-27 18:58                         ` Kashyap Desai
2020-04-28 15:55                           ` John Garry
2020-04-29 11:29                             ` John Garry
2020-04-29 15:50                               ` Kashyap Desai
2020-04-29 17:55                                 ` John Garry
2020-04-30 17:40                                   ` John Garry
2020-04-30 19:18                                     ` Kashyap Desai
2020-03-05 11:54 ` [PATCH RFC v6 09/10] smartpqi: enable host tagset John Garry
2020-03-05 11:54 ` [PATCH RFC v6 10/10] hpsa: enable host_tagset and switch to MQ John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1583409280-158604-8-git-send-email-john.garry@huawei.com \
    --to=john.garry@huawei.com \
    --cc=axboe@kernel.dk \
    --cc=bvanassche@acm.org \
    --cc=chenxiang66@hisilicon.com \
    --cc=don.brace@microsemi.com \
    --cc=esc.storagedev@microsemi.com \
    --cc=hare@suse.de \
    --cc=hch@infradead.org \
    --cc=jejb@linux.ibm.com \
    --cc=kashyap.desai@broadcom.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=ming.lei@redhat.com \
    --cc=shivasharan.srikanteshwara@broadcom.com \
    --cc=sumit.saxena@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.