From: Rakesh Pillai <pillair@codeaurora.org> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Rakesh Pillai <pillair@codeaurora.org> Subject: [PATCH v2 0/3] Add support to handle targets without TrustZone Date: Wed, 25 Mar 2020 16:31:37 +0530 [thread overview] Message-ID: <1585134100-5944-1-git-send-email-pillair@codeaurora.org> (raw) The iommu mapping for S2 SIDs are taken care by TrustZone. For the targets which does not have the support of TrustZone, these mappings need to be created in the driver using an iommu domain. Leaving these SIDs unconfigured will result in a global smmu fault. Hence configuring them for Non-TrustZone targets is mandatory. Changes from v1: - Rebase and fix compilation errors on latest ath10k tree tip Rakesh Pillai (3): dt-bindings: ath10k: Add wifi-firmware subnode for wifi node ath10k: Setup the msa resources before qmi init ath10k: Add support for targets without trustzone .../bindings/net/wireless/qcom,ath10k.txt | 14 ++ drivers/net/wireless/ath/ath10k/core.h | 5 + drivers/net/wireless/ath/ath10k/qmi.c | 61 +------ drivers/net/wireless/ath/ath10k/qmi.h | 3 - drivers/net/wireless/ath/ath10k/snoc.c | 182 ++++++++++++++++++++- drivers/net/wireless/ath/ath10k/snoc.h | 7 + 6 files changed, 208 insertions(+), 64 deletions(-) -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Rakesh Pillai <pillair@codeaurora.org> To: ath10k@lists.infradead.org Cc: Rakesh Pillai <pillair@codeaurora.org>, devicetree@vger.kernel.org, linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 0/3] Add support to handle targets without TrustZone Date: Wed, 25 Mar 2020 16:31:37 +0530 [thread overview] Message-ID: <1585134100-5944-1-git-send-email-pillair@codeaurora.org> (raw) The iommu mapping for S2 SIDs are taken care by TrustZone. For the targets which does not have the support of TrustZone, these mappings need to be created in the driver using an iommu domain. Leaving these SIDs unconfigured will result in a global smmu fault. Hence configuring them for Non-TrustZone targets is mandatory. Changes from v1: - Rebase and fix compilation errors on latest ath10k tree tip Rakesh Pillai (3): dt-bindings: ath10k: Add wifi-firmware subnode for wifi node ath10k: Setup the msa resources before qmi init ath10k: Add support for targets without trustzone .../bindings/net/wireless/qcom,ath10k.txt | 14 ++ drivers/net/wireless/ath/ath10k/core.h | 5 + drivers/net/wireless/ath/ath10k/qmi.c | 61 +------ drivers/net/wireless/ath/ath10k/qmi.h | 3 - drivers/net/wireless/ath/ath10k/snoc.c | 182 ++++++++++++++++++++- drivers/net/wireless/ath/ath10k/snoc.h | 7 + 6 files changed, 208 insertions(+), 64 deletions(-) -- 2.7.4 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2020-03-25 11:01 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-25 11:01 Rakesh Pillai [this message] 2020-03-25 11:01 ` [PATCH v2 0/3] Add support to handle targets without TrustZone Rakesh Pillai 2020-03-25 11:01 ` [PATCH v2 1/3] dt-bindings: ath10k: Add wifi-firmware subnode for wifi node Rakesh Pillai 2020-03-25 11:01 ` Rakesh Pillai 2020-03-31 21:40 ` Rob Herring 2020-03-31 21:40 ` Rob Herring 2020-04-01 7:30 ` pillair 2020-04-01 7:30 ` pillair 2020-03-25 11:01 ` [PATCH v2 2/3] ath10k: Setup the msa resources before qmi init Rakesh Pillai 2020-03-25 11:01 ` Rakesh Pillai 2020-03-25 11:01 ` [PATCH v2 3/3] ath10k: Add support for targets without trustzone Rakesh Pillai 2020-03-25 11:01 ` Rakesh Pillai 2020-04-15 17:33 ` pillair 2020-04-15 17:33 ` pillair
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1585134100-5944-1-git-send-email-pillair@codeaurora.org \ --to=pillair@codeaurora.org \ --cc=ath10k@lists.infradead.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.