From: Wesley Cheng <wcheng@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org, kishon@ti.com,
robh+dt@kernel.org, mark.rutland@arm.com, p.zabel@pengutronix.de
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Jack Pham <jackp@codeaurora.org>,
Wesley Cheng <wcheng@codeaurora.org>
Subject: [PATCH v4 3/4] phy: qcom-qmp: Add SM8150 QMP USB3 PHY support
Date: Mon, 30 Mar 2020 12:36:56 -0700 [thread overview]
Message-ID: <1585597017-30683-4-git-send-email-wcheng@codeaurora.org> (raw)
In-Reply-To: <1585597017-30683-1-git-send-email-wcheng@codeaurora.org>
From: Jack Pham <jackp@codeaurora.org>
Add support for SM8150 QMP USB3 PHY with the necessary
initialization sequences as well as additional QMP V4
register definitions.
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 153 ++++++++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 198 +++++++++++++++++++++++++++++++++++-
2 files changed, 349 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 7db2a94..cc04471 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -160,6 +160,12 @@ enum qphy_reg_layout {
[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
};
+static const unsigned int qmp_v4_usb3phy_regs_layout[] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+};
+
static const unsigned int sdm845_ufsphy_regs_layout[] = {
[QPHY_START_CTRL] = 0x00,
[QPHY_PCS_READY_STATUS] = 0x160,
@@ -972,6 +978,115 @@ enum qphy_reg_layout {
QMP_PHY_INIT_CFG(QPHY_V4_MULTI_LANE_CTRL1, 0x02),
};
+static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+
/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
/* phy-type - PCIE/UFS/USB */
@@ -1126,6 +1241,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
"aux", "cfg_ahb", "ref", "com_aux",
};
+static const char * const qmp_v4_phy_clk_l[] = {
+ "aux", "ref_clk_src", "ref", "com_aux",
+};
+
static const char * const sdm845_ufs_phy_clk_l[] = {
"ref", "ref_aux",
};
@@ -1392,6 +1511,37 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
.is_dual_lane_phy = true,
};
+static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8150_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
+ .rx_tbl = sm8150_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
+ .pcs_tbl = sm8150_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
static void qcom_qmp_phy_configure(void __iomem *base,
const unsigned int *regs,
const struct qmp_phy_init_tbl tbl[],
@@ -2117,6 +2267,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
}, {
.compatible = "qcom,sm8150-qmp-ufs-phy",
.data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
},
{ },
};
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 90f793c..22c9009 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -125,7 +125,7 @@
#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC
#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0
-/* Only for QMP V3 PHY - DP COM registers */
+/* Only for QMP V3 & V4 PHY - DP COM registers */
#define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00
#define QPHY_V3_DP_COM_SW_RESET 0x04
#define QPHY_V3_DP_COM_POWER_DOWN_CTRL 0x08
@@ -314,6 +314,14 @@
#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5 0x60
/* Only for QMP V4 PHY - QSERDES COM registers */
+#define QSERDES_V4_COM_SSC_EN_CENTER 0x010
+#define QSERDES_V4_COM_SSC_PER1 0x01c
+#define QSERDES_V4_COM_SSC_PER2 0x020
+#define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0 0x024
+#define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0 0x028
+#define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1 0x030
+#define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1 0x034
+#define QSERDES_V4_COM_SYSCLK_BUF_ENABLE 0x050
#define QSERDES_V4_COM_PLL_IVCO 0x058
#define QSERDES_V4_COM_CMN_IPTRIM 0x060
#define QSERDES_V4_COM_CP_CTRL_MODE0 0x074
@@ -330,10 +338,22 @@
#define QSERDES_V4_COM_DEC_START_MODE0 0x0bc
#define QSERDES_V4_COM_LOCK_CMP2_MODE1 0x0b8
#define QSERDES_V4_COM_DEC_START_MODE1 0x0c4
+#define QSERDES_V4_COM_DIV_FRAC_START1_MODE0 0x0cc
+#define QSERDES_V4_COM_DIV_FRAC_START2_MODE0 0x0d0
+#define QSERDES_V4_COM_DIV_FRAC_START3_MODE0 0x0d4
+#define QSERDES_V4_COM_DIV_FRAC_START1_MODE1 0x0d8
+#define QSERDES_V4_COM_DIV_FRAC_START2_MODE1 0x0dc
+#define QSERDES_V4_COM_DIV_FRAC_START3_MODE1 0x0e0
#define QSERDES_V4_COM_VCO_TUNE_MAP 0x10c
+#define QSERDES_V4_COM_VCO_TUNE1_MODE0 0x110
+#define QSERDES_V4_COM_VCO_TUNE2_MODE0 0x114
+#define QSERDES_V4_COM_VCO_TUNE1_MODE1 0x118
+#define QSERDES_V4_COM_VCO_TUNE2_MODE1 0x11c
#define QSERDES_V4_COM_VCO_TUNE_INITVAL2 0x124
#define QSERDES_V4_COM_HSCLK_SEL 0x158
#define QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL 0x15c
+#define QSERDES_V4_COM_CORECLK_DIV_MODE1 0x16c
+#define QSERDES_V4_COM_SVS_MODE_CLK_SEL 0x184
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x1ac
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1b0
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x1b4
@@ -341,12 +361,16 @@
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x1b8
/* Only for QMP V4 PHY - TX registers */
+#define QSERDES_V4_TX_RES_CODE_LANE_TX 0x34
+#define QSERDES_V4_TX_RES_CODE_LANE_RX 0x38
#define QSERDES_V4_TX_LANE_MODE_1 0x84
+#define QSERDES_V4_TX_RCV_DETECT_LVL_2 0x9c
#define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8
#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdC
#define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0xe0
#define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0xe4
#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN 0xb8
+#define QSERDES_V4_TX_PI_QEC_CTRL 0x104
/* Only for QMP V4 PHY - RX registers */
#define QSERDES_V4_RX_UCDR_FO_GAIN 0x008
@@ -354,17 +378,27 @@
#define QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN 0x030
#define QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034
#define QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c
+#define QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH 0x040
#define QSERDES_V4_RX_UCDR_PI_CONTROLS 0x044
#define QSERDES_V4_RX_UCDR_PI_CTRL2 0x048
+#define QSERDES_V4_RX_UCDR_SB2_THRESH1 0x04c
+#define QSERDES_V4_RX_UCDR_SB2_THRESH2 0x050
+#define QSERDES_V4_RX_UCDR_SB2_GAIN1 0x054
+#define QSERDES_V4_RX_UCDR_SB2_GAIN2 0x058
+#define QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE 0x060
#define QSERDES_V4_RX_AC_JTAG_ENABLE 0x068
#define QSERDES_V4_RX_AC_JTAG_MODE 0x078
#define QSERDES_V4_RX_RX_TERM_BW 0x080
+#define QSERDES_V4_RX_VGA_CAL_CNTRL1 0x0d4
+#define QSERDES_V4_RX_VGA_CAL_CNTRL2 0x0d8
+#define QSERDES_V4_RX_GM_CAL 0x0dc
#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2 0x0ec
#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3 0x0f0
#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4 0x0f4
#define QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW 0x0f8
#define QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH 0x0fc
#define QSERDES_V4_RX_RX_IDAC_MEASURE_TIME 0x100
+#define QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110
#define QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x114
#define QSERDES_V4_RX_SIGDET_CNTRL 0x11c
#define QSERDES_V4_RX_SIGDET_LVL 0x120
@@ -385,9 +419,12 @@
#define QSERDES_V4_RX_RX_MODE_10_HIGH2 0x1a0
#define QSERDES_V4_RX_RX_MODE_10_HIGH3 0x1a4
#define QSERDES_V4_RX_RX_MODE_10_HIGH4 0x1a8
+#define QSERDES_V4_RX_DFE_EN_TIMER 0x1b4
+#define QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET 0x1b8
#define QSERDES_V4_RX_DCC_CTRL1 0x1bc
+#define QSERDES_V4_RX_VTH_CODE 0x1c4
-/* Only for QMP V4 PHY - PCS registers */
+/* Only for QMP V4 PHY - UFS PCS registers */
#define QPHY_V4_PHY_START 0x000
#define QPHY_V4_POWER_DOWN_CONTROL 0x004
#define QPHY_V4_SW_RESET 0x008
@@ -409,4 +446,161 @@
#define QPHY_V4_TX_MID_TERM_CTRL1 0x1d8
#define QPHY_V4_MULTI_LANE_CTRL1 0x1e0
+/* Only for QMP V4 PHY - USB/PCIe PCS registers */
+#define QPHY_V4_PCS_SW_RESET 0x000
+#define QPHY_V4_PCS_REVISION_ID0 0x004
+#define QPHY_V4_PCS_REVISION_ID1 0x008
+#define QPHY_V4_PCS_REVISION_ID2 0x00c
+#define QPHY_V4_PCS_REVISION_ID3 0x010
+#define QPHY_V4_PCS_PCS_STATUS1 0x014
+#define QPHY_V4_PCS_PCS_STATUS2 0x018
+#define QPHY_V4_PCS_PCS_STATUS3 0x01c
+#define QPHY_V4_PCS_PCS_STATUS4 0x020
+#define QPHY_V4_PCS_PCS_STATUS5 0x024
+#define QPHY_V4_PCS_PCS_STATUS6 0x028
+#define QPHY_V4_PCS_PCS_STATUS7 0x02c
+#define QPHY_V4_PCS_DEBUG_BUS_0_STATUS 0x030
+#define QPHY_V4_PCS_DEBUG_BUS_1_STATUS 0x034
+#define QPHY_V4_PCS_DEBUG_BUS_2_STATUS 0x038
+#define QPHY_V4_PCS_DEBUG_BUS_3_STATUS 0x03c
+#define QPHY_V4_PCS_POWER_DOWN_CONTROL 0x040
+#define QPHY_V4_PCS_START_CONTROL 0x044
+#define QPHY_V4_PCS_INSIG_SW_CTRL1 0x048
+#define QPHY_V4_PCS_INSIG_SW_CTRL2 0x04c
+#define QPHY_V4_PCS_INSIG_SW_CTRL3 0x050
+#define QPHY_V4_PCS_INSIG_SW_CTRL4 0x054
+#define QPHY_V4_PCS_INSIG_SW_CTRL5 0x058
+#define QPHY_V4_PCS_INSIG_SW_CTRL6 0x05c
+#define QPHY_V4_PCS_INSIG_SW_CTRL7 0x060
+#define QPHY_V4_PCS_INSIG_SW_CTRL8 0x064
+#define QPHY_V4_PCS_INSIG_MX_CTRL1 0x068
+#define QPHY_V4_PCS_INSIG_MX_CTRL2 0x06c
+#define QPHY_V4_PCS_INSIG_MX_CTRL3 0x070
+#define QPHY_V4_PCS_INSIG_MX_CTRL4 0x074
+#define QPHY_V4_PCS_INSIG_MX_CTRL5 0x078
+#define QPHY_V4_PCS_INSIG_MX_CTRL7 0x07c
+#define QPHY_V4_PCS_INSIG_MX_CTRL8 0x080
+#define QPHY_V4_PCS_OUTSIG_SW_CTRL1 0x084
+#define QPHY_V4_PCS_OUTSIG_MX_CTRL1 0x088
+#define QPHY_V4_PCS_CLAMP_ENABLE 0x08c
+#define QPHY_V4_PCS_POWER_STATE_CONFIG1 0x090
+#define QPHY_V4_PCS_POWER_STATE_CONFIG2 0x094
+#define QPHY_V4_PCS_FLL_CNTRL1 0x098
+#define QPHY_V4_PCS_FLL_CNTRL2 0x09c
+#define QPHY_V4_PCS_FLL_CNT_VAL_L 0x0a0
+#define QPHY_V4_PCS_FLL_CNT_VAL_H_TOL 0x0a4
+#define QPHY_V4_PCS_FLL_MAN_CODE 0x0a8
+#define QPHY_V4_PCS_TEST_CONTROL1 0x0ac
+#define QPHY_V4_PCS_TEST_CONTROL2 0x0b0
+#define QPHY_V4_PCS_TEST_CONTROL3 0x0b4
+#define QPHY_V4_PCS_TEST_CONTROL4 0x0b8
+#define QPHY_V4_PCS_TEST_CONTROL5 0x0bc
+#define QPHY_V4_PCS_TEST_CONTROL6 0x0c0
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG1 0x0c4
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG2 0x0c8
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG3 0x0cc
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG4 0x0d0
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG5 0x0d4
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG6 0x0d8
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG1 0x0dc
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG2 0x0e0
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG3 0x0e4
+#define QPHY_V4_PCS_BIST_CTRL 0x0e8
+#define QPHY_V4_PCS_PRBS_POLY0 0x0ec
+#define QPHY_V4_PCS_PRBS_POLY1 0x0f0
+#define QPHY_V4_PCS_FIXED_PAT0 0x0f4
+#define QPHY_V4_PCS_FIXED_PAT1 0x0f8
+#define QPHY_V4_PCS_FIXED_PAT2 0x0fc
+#define QPHY_V4_PCS_FIXED_PAT3 0x100
+#define QPHY_V4_PCS_FIXED_PAT4 0x104
+#define QPHY_V4_PCS_FIXED_PAT5 0x108
+#define QPHY_V4_PCS_FIXED_PAT6 0x10c
+#define QPHY_V4_PCS_FIXED_PAT7 0x110
+#define QPHY_V4_PCS_FIXED_PAT8 0x114
+#define QPHY_V4_PCS_FIXED_PAT9 0x118
+#define QPHY_V4_PCS_FIXED_PAT10 0x11c
+#define QPHY_V4_PCS_FIXED_PAT11 0x120
+#define QPHY_V4_PCS_FIXED_PAT12 0x124
+#define QPHY_V4_PCS_FIXED_PAT13 0x128
+#define QPHY_V4_PCS_FIXED_PAT14 0x12c
+#define QPHY_V4_PCS_FIXED_PAT15 0x130
+#define QPHY_V4_PCS_TXMGN_CONFIG 0x134
+#define QPHY_V4_PCS_G12S1_TXMGN_V0 0x138
+#define QPHY_V4_PCS_G12S1_TXMGN_V1 0x13c
+#define QPHY_V4_PCS_G12S1_TXMGN_V2 0x140
+#define QPHY_V4_PCS_G12S1_TXMGN_V3 0x144
+#define QPHY_V4_PCS_G12S1_TXMGN_V4 0x148
+#define QPHY_V4_PCS_G12S1_TXMGN_V0_RS 0x14c
+#define QPHY_V4_PCS_G12S1_TXMGN_V1_RS 0x150
+#define QPHY_V4_PCS_G12S1_TXMGN_V2_RS 0x154
+#define QPHY_V4_PCS_G12S1_TXMGN_V3_RS 0x158
+#define QPHY_V4_PCS_G12S1_TXMGN_V4_RS 0x15c
+#define QPHY_V4_PCS_G3S2_TXMGN_MAIN 0x160
+#define QPHY_V4_PCS_G3S2_TXMGN_MAIN_RS 0x164
+#define QPHY_V4_PCS_G12S1_TXDEEMPH_M6DB 0x168
+#define QPHY_V4_PCS_G12S1_TXDEEMPH_M3P5DB 0x16c
+#define QPHY_V4_PCS_G3S2_PRE_GAIN 0x170
+#define QPHY_V4_PCS_G3S2_POST_GAIN 0x174
+#define QPHY_V4_PCS_G3S2_PRE_POST_OFFSET 0x178
+#define QPHY_V4_PCS_G3S2_PRE_GAIN_RS 0x17c
+#define QPHY_V4_PCS_G3S2_POST_GAIN_RS 0x180
+#define QPHY_V4_PCS_G3S2_PRE_POST_OFFSET_RS 0x184
+#define QPHY_V4_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_V4_PCS_RX_SIGDET_DTCT_CNTRL 0x18c
+#define QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L 0x190
+#define QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H 0x194
+#define QPHY_V4_PCS_RATE_SLEW_CNTRL1 0x198
+#define QPHY_V4_PCS_RATE_SLEW_CNTRL2 0x19c
+#define QPHY_V4_PCS_PWRUP_RESET_DLY_TIME_AUXCLK 0x1a0
+#define QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L 0x1a4
+#define QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_H 0x1a8
+#define QPHY_V4_PCS_TSYNC_RSYNC_TIME 0x1ac
+#define QPHY_V4_PCS_CDR_RESET_TIME 0x1b0
+#define QPHY_V4_PCS_TSYNC_DLY_TIME 0x1b4
+#define QPHY_V4_PCS_ELECIDLE_DLY_SEL 0x1b8
+#define QPHY_V4_PCS_CMN_ACK_OUT_SEL 0x1bc
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG1 0x1c0
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG2 0x1c4
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG3 0x1c8
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG4 0x1cc
+#define QPHY_V4_PCS_PCS_TX_RX_CONFIG 0x1d0
+#define QPHY_V4_PCS_RX_IDLE_DTCT_CNTRL 0x1d4
+#define QPHY_V4_PCS_RX_DCC_CAL_CONFIG 0x1d8
+#define QPHY_V4_PCS_EQ_CONFIG1 0x1dc
+#define QPHY_V4_PCS_EQ_CONFIG2 0x1e0
+#define QPHY_V4_PCS_EQ_CONFIG3 0x1e4
+#define QPHY_V4_PCS_EQ_CONFIG4 0x1e8
+#define QPHY_V4_PCS_EQ_CONFIG5 0x1ec
+#define QPHY_V4_PCS_USB3_POWER_STATE_CONFIG1 0x300
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_STATUS 0x304
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x308
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL2 0x30c
+#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x310
+#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x314
+#define QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x318
+#define QPHY_V4_PCS_USB3_LFPS_TX_ECSTART 0x31c
+#define QPHY_V4_PCS_USB3_LFPS_PER_TIMER_VAL 0x320
+#define QPHY_V4_PCS_USB3_LFPS_TX_END_CNT_U3_START 0x324
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_LOCK_TIME 0x328
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME 0x32c
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_CTLE_TIME 0x330
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2 0x334
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x338
+#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x33c
+#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x340
+#define QPHY_V4_PCS_USB3_ARCVR_DTCT_EN_PERIOD 0x344
+#define QPHY_V4_PCS_USB3_ARCVR_DTCT_CM_DLY 0x348
+#define QPHY_V4_PCS_USB3_TXONESZEROS_RUN_LENGTH 0x34c
+#define QPHY_V4_PCS_USB3_ALFPS_DEGLITCH_VAL 0x350
+#define QPHY_V4_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x354
+#define QPHY_V4_PCS_USB3_TEST_CONTROL 0x358
+
+/* Only for QMP V4 PHY - PCS_MISC registers */
+#define QPHY_V4_PCS_MISC_TYPEC_CTRL 0x00
+#define QPHY_V4_PCS_MISC_TYPEC_PWRDN_CTRL 0x04
+#define QPHY_V4_PCS_MISC_PCS_MISC_CONFIG1 0x08
+#define QPHY_V4_PCS_MISC_CLAMP_ENABLE 0x0c
+#define QPHY_V4_PCS_MISC_TYPEC_STATUS 0x10
+#define QPHY_V4_PCS_MISC_PLACEHOLDER_STATUS 0x14
+
#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-03-30 19:37 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-30 19:36 [PATCH v4 0/4] Add SS/HS-USB changes for Qualcomm SM8150 chipset Wesley Cheng
2020-03-30 19:36 ` [PATCH v4 1/4] dt-bindings: phy: Add binding for qcom,usb-hs-7nm Wesley Cheng
2020-03-30 19:36 ` [PATCH v4 2/4] phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs Wesley Cheng
2020-04-02 6:43 ` Manu Gautam
2020-04-03 0:32 ` Wesley Cheng
2020-03-30 19:36 ` Wesley Cheng [this message]
2020-04-02 7:00 ` [PATCH v4 3/4] phy: qcom-qmp: Add SM8150 QMP USB3 PHY support Manu Gautam
2020-04-02 23:06 ` Wesley Cheng
2020-03-30 19:36 ` [PATCH v4 4/4] phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB Wesley Cheng
2020-04-02 7:35 ` Manu Gautam
2020-04-02 18:31 ` Wesley Cheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1585597017-30683-4-git-send-email-wcheng@codeaurora.org \
--to=wcheng@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jackp@codeaurora.org \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.