All of lore.kernel.org
 help / color / mirror / Atom feed
From: haibo.chen@nxp.com
To: dmitry.torokhov@gmail.com
Cc: linux-input@vger.kernel.org, linux-imx@nxp.com, haibo.chen@nxp.com
Subject: [PATCH v2 1/2] input: egalax_ts: free irq resource before request the line as GPIO
Date: Fri, 10 Apr 2020 20:43:04 +0800	[thread overview]
Message-ID: <1586522585-14296-1-git-send-email-haibo.chen@nxp.com> (raw)

From: Haibo Chen <haibo.chen@nxp.com>

If GPIO is connected to an IRQ then it should not request it as
GPIO function only when free its IRQ resource.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
 drivers/input/touchscreen/egalax_ts.c | 46 ++++++++++++++++++++++-----
 1 file changed, 38 insertions(+), 8 deletions(-)

diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
index 83ac8c128192..c816e03ba421 100644
--- a/drivers/input/touchscreen/egalax_ts.c
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -116,6 +116,26 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int egalax_irq_request(struct egalax_ts *ts)
+{
+	int ret;
+	struct i2c_client *client = ts->client;
+
+	ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					egalax_ts_interrupt,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					"egalax_ts", ts);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to register interrupt\n");
+
+	return ret;
+}
+
+static void egalax_free_irq(struct egalax_ts *ts)
+{
+	devm_free_irq(&ts->client->dev, ts->client->irq, ts);
+}
+
 /* wake up controller by an falling edge of interrupt gpio.  */
 static int egalax_wake_up_device(struct i2c_client *client)
 {
@@ -211,19 +231,16 @@ static int egalax_ts_probe(struct i2c_client *client,
 			     ABS_MT_POSITION_Y, 0, EGALAX_MAX_Y, 0, 0);
 	input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0);
 
-	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
-					  egalax_ts_interrupt,
-					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-					  "egalax_ts", ts);
-	if (error < 0) {
-		dev_err(&client->dev, "Failed to register interrupt\n");
+	error = egalax_irq_request(ts);
+	if (error)
 		return error;
-	}
 
 	error = input_register_device(ts->input_dev);
 	if (error)
 		return error;
 
+	i2c_set_clientdata(client, ts);
+
 	return 0;
 }
 
@@ -251,11 +268,24 @@ static int __maybe_unused egalax_ts_suspend(struct device *dev)
 static int __maybe_unused egalax_ts_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct egalax_ts *ts = i2c_get_clientdata(client);
+	int error;
 
 	if (device_may_wakeup(dev))
 		return disable_irq_wake(client->irq);
 
-	return egalax_wake_up_device(client);
+	/* Free IRQ as IRQ pin is used as output in the suspend sequence */
+	egalax_free_irq(ts);
+
+	error = egalax_wake_up_device(client);
+	if (error) {
+		dev_err(&client->dev, "Failed to wake up the controller\n");
+		return error;
+	}
+
+	error = egalax_irq_request(ts);
+
+	return error;
 }
 
 static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
-- 
2.17.1


             reply	other threads:[~2020-04-10 12:51 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-10 12:43 haibo.chen [this message]
2020-04-10 12:43 ` [PATCH v2 2/2] input: egalax_ts: correct the get_firmware_command haibo.chen
2020-04-10 13:01   ` Fabio Estevam
2020-04-10 13:18     ` BOUGH CHEN

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1586522585-14296-1-git-send-email-haibo.chen@nxp.com \
    --to=haibo.chen@nxp.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-input@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.