From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Tom Joseph <tjoseph@cadence.com>,
Jingoo Han <jingoohan1@gmail.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Marek Vasut <marek.vasut+renesas@gmail.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Shawn Lin <shawn.lin@rock-chips.com>,
Heiko Stuebner <heiko@sntech.de>,
Kishon Vijay Abraham I <kishon@ti.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v10 1/8] PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c
Date: Thu, 7 May 2020 13:33:12 +0100 [thread overview]
Message-ID: <1588854799-13710-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <1588854799-13710-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
This commit renames pcie-rcar.c to pcie-rcar-host.c in preparation for
adding support for endpoint mode. CONFIG_PCIE_RCAR is kept so that arm64
defconfig change can be a separate patch.
With this patch both config options PCIE_RCAR and PCIE_RCAR_HOST will be
available but PCIE_RCAR internally selects PCIE_RCAR_HOST so that bisect
builds wont be affected.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
drivers/pci/controller/Kconfig | 10 ++++++++++
drivers/pci/controller/Makefile | 2 +-
.../pci/controller/{pcie-rcar.c => pcie-rcar-host.c} | 0
3 files changed, 11 insertions(+), 1 deletion(-)
rename drivers/pci/controller/{pcie-rcar.c => pcie-rcar-host.c} (100%)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index af0f0bc11917..cfdc898450d0 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -58,8 +58,18 @@ config PCIE_RCAR
bool "Renesas R-Car PCIe controller"
depends on ARCH_RENESAS || COMPILE_TEST
depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_RCAR_HOST
help
Say Y here if you want PCIe controller support on R-Car SoCs.
+ This option will be removed after arm64 defconfig is updated.
+
+config PCIE_RCAR_HOST
+ bool "Renesas R-Car PCIe host controller"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ depends on PCI_MSI_IRQ_DOMAIN
+ help
+ Say Y here if you want PCIe controller support on R-Car SoCs in host
+ mode.
config PCI_HOST_COMMON
bool
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index 158c59771824..9dbccb5b24e1 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -7,7 +7,7 @@ obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
-obj-$(CONFIG_PCIE_RCAR) += pcie-rcar.o
+obj-$(CONFIG_PCIE_RCAR_HOST) += pcie-rcar-host.o
obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar-host.c
similarity index 100%
rename from drivers/pci/controller/pcie-rcar.c
rename to drivers/pci/controller/pcie-rcar-host.c
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: devicetree@vger.kernel.org, Heiko Stuebner <heiko@sntech.de>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Jingoo Han <jingoohan1@gmail.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-renesas-soc@vger.kernel.org,
linux-rockchip@lists.infradead.org,
Tom Joseph <tjoseph@cadence.com>,
Rob Herring <robh+dt@kernel.org>,
Prabhakar <prabhakar.csengg@gmail.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Shawn Lin <shawn.lin@rock-chips.com>,
linux-arm-kernel@lists.infradead.org,
Marek Vasut <marek.vasut+renesas@gmail.com>
Subject: [PATCH v10 1/8] PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c
Date: Thu, 7 May 2020 13:33:12 +0100 [thread overview]
Message-ID: <1588854799-13710-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <1588854799-13710-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
This commit renames pcie-rcar.c to pcie-rcar-host.c in preparation for
adding support for endpoint mode. CONFIG_PCIE_RCAR is kept so that arm64
defconfig change can be a separate patch.
With this patch both config options PCIE_RCAR and PCIE_RCAR_HOST will be
available but PCIE_RCAR internally selects PCIE_RCAR_HOST so that bisect
builds wont be affected.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
drivers/pci/controller/Kconfig | 10 ++++++++++
drivers/pci/controller/Makefile | 2 +-
.../pci/controller/{pcie-rcar.c => pcie-rcar-host.c} | 0
3 files changed, 11 insertions(+), 1 deletion(-)
rename drivers/pci/controller/{pcie-rcar.c => pcie-rcar-host.c} (100%)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index af0f0bc11917..cfdc898450d0 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -58,8 +58,18 @@ config PCIE_RCAR
bool "Renesas R-Car PCIe controller"
depends on ARCH_RENESAS || COMPILE_TEST
depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_RCAR_HOST
help
Say Y here if you want PCIe controller support on R-Car SoCs.
+ This option will be removed after arm64 defconfig is updated.
+
+config PCIE_RCAR_HOST
+ bool "Renesas R-Car PCIe host controller"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ depends on PCI_MSI_IRQ_DOMAIN
+ help
+ Say Y here if you want PCIe controller support on R-Car SoCs in host
+ mode.
config PCI_HOST_COMMON
bool
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index 158c59771824..9dbccb5b24e1 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -7,7 +7,7 @@ obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
-obj-$(CONFIG_PCIE_RCAR) += pcie-rcar.o
+obj-$(CONFIG_PCIE_RCAR_HOST) += pcie-rcar-host.o
obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar-host.c
similarity index 100%
rename from drivers/pci/controller/pcie-rcar.c
rename to drivers/pci/controller/pcie-rcar-host.c
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-07 12:34 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-07 12:33 [PATCH v10 0/8] Add endpoint driver for R-Car PCIe controller Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar [this message]
2020-05-07 12:33 ` [PATCH v10 1/8] PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c Lad Prabhakar
2020-05-07 12:33 ` [PATCH v10 2/8] PCI: rcar: Move shareable code to a common file Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar
2020-05-07 12:33 ` [PATCH v10 3/8] PCI: rcar: Fix calculating mask for PCIEPAMR register Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar
2020-05-07 12:33 ` [PATCH v10 4/8] PCI: endpoint: Pass page size as argument to pci_epc_mem_init() Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar
2020-05-07 12:33 ` [PATCH v10 5/8] PCI: endpoint: Add support to handle multiple base for mapping outbound memory Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar
2020-05-07 12:33 ` [PATCH v10 6/8] dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar
2020-05-07 12:33 ` [PATCH v10 7/8] PCI: rcar: Add endpoint mode support Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar
2020-05-07 12:33 ` [PATCH v10 8/8] MAINTAINERS: Add file patterns for rcar PCI device tree bindings Lad Prabhakar
2020-05-07 12:33 ` Lad Prabhakar
2020-05-11 10:36 ` [PATCH v10 0/8] Add endpoint driver for R-Car PCIe controller Lorenzo Pieralisi
2020-05-11 10:36 ` Lorenzo Pieralisi
2020-05-11 10:36 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1588854799-13710-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=gustavo.pimentel@synopsys.com \
--cc=heiko@sntech.de \
--cc=jingoohan1@gmail.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marek.vasut+renesas@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=tjoseph@cadence.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.