From: Anson Huang <Anson.Huang@nxp.com> To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: Linux-imx@nxp.com Subject: [PATCH] ARM: dts: imx: Make tempmon node as child of anatop node Date: Wed, 20 May 2020 14:30:16 +0800 [thread overview] Message-ID: <1589956216-22499-1-git-send-email-Anson.Huang@nxp.com> (raw) i.MX6/7 SoCs' temperature sensor is inside anatop module from HW perspective, so it should be a child node of anatop. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- arch/arm/boot/dts/imx6qdl.dtsi | 22 +++++++++++----------- arch/arm/boot/dts/imx6sl.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6sll.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6sx.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6ul.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx7s.dtsi | 20 ++++++++++---------- 6 files changed, 61 insertions(+), 61 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 39d4afd..43d44d5 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -69,17 +69,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; - #thermal-sensor-cells = <0>; - }; - ldb: ldb { #address-cells = <1>; #size-cells = <0>; @@ -795,6 +784,17 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 911d8cf..d8efc0a 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -93,16 +93,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gpc>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&gpc>; @@ -628,6 +618,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index edd3abb..bf7f048 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -105,16 +105,6 @@ clock-output-names = "ipp_di1"; }; - tempmon: temperature-sensor { - compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gpc>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -531,6 +521,16 @@ anatop-max-voltage = <3400000>; anatop-enable-bit = <0>; }; + + tempmon: temperature-sensor { + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usb-phy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index e031337..8c4473b 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -134,16 +134,6 @@ clock-output-names = "anaclk2"; }; - tempmon: tempmon { - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&gpc>; @@ -696,6 +686,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 35e7301..505fd4f 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -131,16 +131,6 @@ clock-output-names = "ipp_di1"; }; - tempmon: tempmon { - compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a7-pmu"; interrupt-parent = <&gpc>; @@ -611,6 +601,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 8bac491..3904558 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -147,16 +147,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx7d-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&fuse_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; - }; - timer { compatible = "arm,armv7-timer"; interrupt-parent = <&intc>; @@ -586,6 +576,16 @@ anatop-max-voltage = <1300000>; anatop-enable-bit = <0>; }; + + tempmon: tempmon { + compatible = "fsl,imx7d-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&fuse_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + }; }; snvs: snvs@30370000 { -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Anson Huang <Anson.Huang@nxp.com> To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: Linux-imx@nxp.com Subject: [PATCH] ARM: dts: imx: Make tempmon node as child of anatop node Date: Wed, 20 May 2020 14:30:16 +0800 [thread overview] Message-ID: <1589956216-22499-1-git-send-email-Anson.Huang@nxp.com> (raw) i.MX6/7 SoCs' temperature sensor is inside anatop module from HW perspective, so it should be a child node of anatop. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- arch/arm/boot/dts/imx6qdl.dtsi | 22 +++++++++++----------- arch/arm/boot/dts/imx6sl.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6sll.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6sx.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6ul.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx7s.dtsi | 20 ++++++++++---------- 6 files changed, 61 insertions(+), 61 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 39d4afd..43d44d5 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -69,17 +69,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; - #thermal-sensor-cells = <0>; - }; - ldb: ldb { #address-cells = <1>; #size-cells = <0>; @@ -795,6 +784,17 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 911d8cf..d8efc0a 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -93,16 +93,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gpc>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&gpc>; @@ -628,6 +618,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index edd3abb..bf7f048 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -105,16 +105,6 @@ clock-output-names = "ipp_di1"; }; - tempmon: temperature-sensor { - compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gpc>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -531,6 +521,16 @@ anatop-max-voltage = <3400000>; anatop-enable-bit = <0>; }; + + tempmon: temperature-sensor { + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usb-phy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index e031337..8c4473b 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -134,16 +134,6 @@ clock-output-names = "anaclk2"; }; - tempmon: tempmon { - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&gpc>; @@ -696,6 +686,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 35e7301..505fd4f 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -131,16 +131,6 @@ clock-output-names = "ipp_di1"; }; - tempmon: tempmon { - compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a7-pmu"; interrupt-parent = <&gpc>; @@ -611,6 +601,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 8bac491..3904558 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -147,16 +147,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx7d-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&fuse_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; - }; - timer { compatible = "arm,armv7-timer"; interrupt-parent = <&intc>; @@ -586,6 +576,16 @@ anatop-max-voltage = <1300000>; anatop-enable-bit = <0>; }; + + tempmon: tempmon { + compatible = "fsl,imx7d-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&fuse_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + }; }; snvs: snvs@30370000 { -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-05-20 6:40 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-20 6:30 Anson Huang [this message] 2020-05-20 6:30 ` [PATCH] ARM: dts: imx: Make tempmon node as child of anatop node Anson Huang 2020-05-20 7:43 ` Aisheng Dong 2020-05-20 7:43 ` Aisheng Dong 2020-05-20 7:46 ` Anson Huang 2020-05-20 7:46 ` Anson Huang 2020-05-20 8:06 ` Aisheng Dong 2020-05-20 8:06 ` Aisheng Dong 2020-05-20 8:11 ` Anson Huang 2020-05-20 8:11 ` Anson Huang 2020-05-20 9:22 ` Aisheng Dong 2020-05-20 9:22 ` Aisheng Dong 2020-06-18 7:04 ` Shawn Guo 2020-06-18 7:04 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1589956216-22499-1-git-send-email-Anson.Huang@nxp.com \ --to=anson.huang@nxp.com \ --cc=Linux-imx@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.