From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH 3/3] ARM: dts: r8a7742-iwg21d-q7: Sound DMA support via DVC on DTS
Date: Wed, 27 May 2020 21:23:33 +0100 [thread overview]
Message-ID: <1590611013-26029-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <1590611013-26029-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
Enable sound with DMA support on carrier board.
DMA transfer uses DVC
DMA DMApp
[MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI]
DMA DMApp
[MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
---
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 63 +++++++++++++++++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index d6154fd..704fe22 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -5,6 +5,29 @@
* Copyright (C) 2020 Renesas Electronics Corp.
*/
+/*
+ * SSI-SGTL5000
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer set "DVC Out" 100%
+ * amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ * amixer set "DVC Out Mute" on
+ * amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ * amixer set "DVC Out Ramp" on
+ * aplay xxx.wav &
+ * amixer set "DVC Out" 80% // Volume Down
+ * amixer set "DVC Out" 100% // Volume Up
+ */
+
/dts-v1/;
#include "r8a7742-iwg21m.dtsi"
@@ -37,6 +60,21 @@
regulator-always-on;
};
+ rsnd_sgtl5000: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
+ };
+
vcc_sdhi2: regulator-vcc-sdhi2 {
compatible = "regulator-fixed";
@@ -152,6 +190,11 @@
power-source = <1800>;
};
+ sound_pins: sound {
+ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
+ function = "ssi";
+ };
+
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
@@ -168,6 +211,22 @@
};
};
+&rcar_sound {
+ pinctrl-0 = <&sound_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi4 &src4 &dvc1>;
+ capture = <&ssi3 &src3 &dvc0>;
+ };
+ };
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
@@ -201,6 +260,10 @@
status = "okay";
};
+&ssi4 {
+ shared-pin;
+};
+
&usbphy {
status = "okay";
};
--
2.7.4
next prev parent reply other threads:[~2020-05-27 20:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 20:23 [PATCH 0/3] iW-RainboW-G21D-Qseven enable HSUSB, USB2.0, XHCI and Sound Lad Prabhakar
2020-05-27 20:23 ` [PATCH 1/3] ARM: dts: r8a7742-iwg21d-q7: Enable HSUSB, USB2.0 and XHCI Lad Prabhakar
2020-05-28 9:36 ` Sergei Shtylyov
2020-05-29 14:03 ` Geert Uytterhoeven
2020-05-27 20:23 ` [PATCH 2/3] ARM: dts: r8a7742-iwg21d-q7: Enable SGTL5000 audio codec Lad Prabhakar
2020-05-29 14:35 ` Geert Uytterhoeven
2020-05-29 14:36 ` Geert Uytterhoeven
2020-05-27 20:23 ` Lad Prabhakar [this message]
2020-05-29 14:36 ` [PATCH 3/3] ARM: dts: r8a7742-iwg21d-q7: Sound DMA support via DVC on DTS Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1590611013-26029-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.