All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gene Chen <gene.chen.richtek@gmail.com>
To: lee.jones@linaro.org, jic23@kernel.org,
	jacek.anaszewski@gmail.com, pavel@ucw.cz, matthias.bgg@gmail.com
Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
	dmurphy@ti.com, lgirdwood@gmail.com, broonie@kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	gene_chen@richtek.com, shufan_lee@richtek.com,
	cy_huang@richtek.com, benjamin.chao@mediatek.com
Subject: [PATCH v2 1/4] dt-bindings: mfd: Add bindings for the Mediatek MT6360 PMIC
Date: Fri, 19 Jun 2020 19:53:48 +0800	[thread overview]
Message-ID: <1592567631-20363-2-git-send-email-gene.chen.richtek@gmail.com> (raw)
In-Reply-To: <1592567631-20363-1-git-send-email-gene.chen.richtek@gmail.com>

From: Gene Chen <gene_chen@richtek.com>

Add devicetree binding document support Mediatek MT6360 PMIC

Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
 Documentation/devicetree/bindings/mfd/mt6360.txt | 122 +++++++++++++++++++++++
 include/dt-bindings/mfd/mt6360.h                 |  15 +++
 2 files changed, 137 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.txt
 create mode 100644 include/dt-bindings/mfd/mt6360.h

diff --git a/Documentation/devicetree/bindings/mfd/mt6360.txt b/Documentation/devicetree/bindings/mfd/mt6360.txt
new file mode 100644
index 0000000..7d7d349
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mt6360.txt
@@ -0,0 +1,122 @@
+MediaTek MT6360 PMIC Driver
+
+MT6360 is a multifunction device with the following sub modules:
+It is interfaced to host controller using I2C interface.
+This document describes the binding for PMIC device and its sub module.
+
+- ADC
+- Battery Charger/OTG boost
+- Flash LED/RGB LED/moonlight LED
+- 2-channel Buck and 6-channel LDO
+- USB_PD
+
+Required properties:
+- compatible:	Must be "mediatek,mt6360-pmu"
+- reg:		Specifies the I2C slave address of PMIC block, Must be <0x34>
+- interrupts:	I2C device IRQ line connected to the main SoC.
+
+Optional subnodes:
+- ADC
+	Required properties:
+		- compatible: "mediatek,mt6360-adc"
+- battery charger/OTG boost
+	Required properties:
+		- compatible: "mediatek,mt6360-chg"
+- Flash LED/RGB LED/moonlight LED
+	Required properties:
+		- compatible: "mediatek,mt6360-led"
+- 2-channel Buck and 6-channel LDO
+	Required properties:
+		- compatible: "mediatek,mt6360-regulator"
+- USB_PD
+	Required properties:
+		- compatible: "mediatek,mt6360-tcpc"
+
+Example:
+
+	#include <dt-bindings/interrupt-controller/irq.h>
+	#include <dt-bindings/mfd/mt6360.h>
+
+	mt6360@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		wakeup-source;
+		interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		adc {
+			compatible = "mediatek,mt6360-adc";
+			#io-channel-cells = <1>;
+		};
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN3-supply = <&BUCK2>;
+			buck1 {
+				regulator-compatible = "BUCK1";
+				regulator-name = "mt6360,buck1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+			};
+			BUCK2: buck2 {
+				regulator-compatible = "BUCK2";
+				regulator-name = "mt6360,buck2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+			};
+			ldo6 {
+				regulator-compatible = "LDO6";
+				regulator-name = "mt6360,ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo7 {
+				regulator-compatible = "LDO7";
+				regulator-name = "mt6360,ldo7";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo1 {
+				regulator-compatible = "LDO1";
+				regulator-name = "mt6360,ldo1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo2 {
+				regulator-compatible = "LDO2";
+				regulator-name = "mt6360,ldo2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo3 {
+				regulator-compatible = "LDO3";
+				regulator-name = "mt6360,ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo5 {
+				regulator-compatible = "LDO5";
+				regulator-name = "mt6360,ldo5";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+		};
+	};
diff --git a/include/dt-bindings/mfd/mt6360.h b/include/dt-bindings/mfd/mt6360.h
new file mode 100644
index 0000000..6368388
--- /dev/null
+++ b/include/dt-bindings/mfd/mt6360.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides macros for MT6360 device bindings.
+ *
+ * Copyright (c) 2020 Mediatek Inc.
+ */
+
+#ifndef __DT_BINDINGS_MT6360_H__
+#define __DT_BINDINGS_MT6360_H__
+
+#define MT6360_OPMODE_LP		(2)
+#define MT6360_OPMODE_ULP		(3)
+#define MT6360_OPMODE_NORMAL		(0)
+
+#endif /* __DT_BINDINGS_MT6360_H__ */
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Gene Chen <gene.chen.richtek@gmail.com>
To: lee.jones@linaro.org, jic23@kernel.org,
	jacek.anaszewski@gmail.com, pavel@ucw.cz, matthias.bgg@gmail.com
Cc: gene_chen@richtek.com, lars@metafoo.de, lgirdwood@gmail.com,
	linux-kernel@vger.kernel.org, cy_huang@richtek.com,
	benjamin.chao@mediatek.com, broonie@kernel.org,
	linux-mediatek@lists.infradead.org, dmurphy@ti.com,
	pmeerw@pmeerw.net, knaack.h@gmx.de,
	linux-arm-kernel@lists.infradead.org, shufan_lee@richtek.com
Subject: [PATCH v2 1/4] dt-bindings: mfd: Add bindings for the Mediatek MT6360 PMIC
Date: Fri, 19 Jun 2020 19:53:48 +0800	[thread overview]
Message-ID: <1592567631-20363-2-git-send-email-gene.chen.richtek@gmail.com> (raw)
In-Reply-To: <1592567631-20363-1-git-send-email-gene.chen.richtek@gmail.com>

From: Gene Chen <gene_chen@richtek.com>

Add devicetree binding document support Mediatek MT6360 PMIC

Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
 Documentation/devicetree/bindings/mfd/mt6360.txt | 122 +++++++++++++++++++++++
 include/dt-bindings/mfd/mt6360.h                 |  15 +++
 2 files changed, 137 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.txt
 create mode 100644 include/dt-bindings/mfd/mt6360.h

diff --git a/Documentation/devicetree/bindings/mfd/mt6360.txt b/Documentation/devicetree/bindings/mfd/mt6360.txt
new file mode 100644
index 0000000..7d7d349
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mt6360.txt
@@ -0,0 +1,122 @@
+MediaTek MT6360 PMIC Driver
+
+MT6360 is a multifunction device with the following sub modules:
+It is interfaced to host controller using I2C interface.
+This document describes the binding for PMIC device and its sub module.
+
+- ADC
+- Battery Charger/OTG boost
+- Flash LED/RGB LED/moonlight LED
+- 2-channel Buck and 6-channel LDO
+- USB_PD
+
+Required properties:
+- compatible:	Must be "mediatek,mt6360-pmu"
+- reg:		Specifies the I2C slave address of PMIC block, Must be <0x34>
+- interrupts:	I2C device IRQ line connected to the main SoC.
+
+Optional subnodes:
+- ADC
+	Required properties:
+		- compatible: "mediatek,mt6360-adc"
+- battery charger/OTG boost
+	Required properties:
+		- compatible: "mediatek,mt6360-chg"
+- Flash LED/RGB LED/moonlight LED
+	Required properties:
+		- compatible: "mediatek,mt6360-led"
+- 2-channel Buck and 6-channel LDO
+	Required properties:
+		- compatible: "mediatek,mt6360-regulator"
+- USB_PD
+	Required properties:
+		- compatible: "mediatek,mt6360-tcpc"
+
+Example:
+
+	#include <dt-bindings/interrupt-controller/irq.h>
+	#include <dt-bindings/mfd/mt6360.h>
+
+	mt6360@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		wakeup-source;
+		interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		adc {
+			compatible = "mediatek,mt6360-adc";
+			#io-channel-cells = <1>;
+		};
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN3-supply = <&BUCK2>;
+			buck1 {
+				regulator-compatible = "BUCK1";
+				regulator-name = "mt6360,buck1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+			};
+			BUCK2: buck2 {
+				regulator-compatible = "BUCK2";
+				regulator-name = "mt6360,buck2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+			};
+			ldo6 {
+				regulator-compatible = "LDO6";
+				regulator-name = "mt6360,ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo7 {
+				regulator-compatible = "LDO7";
+				regulator-name = "mt6360,ldo7";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo1 {
+				regulator-compatible = "LDO1";
+				regulator-name = "mt6360,ldo1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo2 {
+				regulator-compatible = "LDO2";
+				regulator-name = "mt6360,ldo2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo3 {
+				regulator-compatible = "LDO3";
+				regulator-name = "mt6360,ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo5 {
+				regulator-compatible = "LDO5";
+				regulator-name = "mt6360,ldo5";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+		};
+	};
diff --git a/include/dt-bindings/mfd/mt6360.h b/include/dt-bindings/mfd/mt6360.h
new file mode 100644
index 0000000..6368388
--- /dev/null
+++ b/include/dt-bindings/mfd/mt6360.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides macros for MT6360 device bindings.
+ *
+ * Copyright (c) 2020 Mediatek Inc.
+ */
+
+#ifndef __DT_BINDINGS_MT6360_H__
+#define __DT_BINDINGS_MT6360_H__
+
+#define MT6360_OPMODE_LP		(2)
+#define MT6360_OPMODE_ULP		(3)
+#define MT6360_OPMODE_NORMAL		(0)
+
+#endif /* __DT_BINDINGS_MT6360_H__ */
-- 
2.7.4


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Gene Chen <gene.chen.richtek@gmail.com>
To: lee.jones@linaro.org, jic23@kernel.org,
	jacek.anaszewski@gmail.com, pavel@ucw.cz, matthias.bgg@gmail.com
Cc: gene_chen@richtek.com, lars@metafoo.de, lgirdwood@gmail.com,
	linux-kernel@vger.kernel.org, cy_huang@richtek.com,
	benjamin.chao@mediatek.com, broonie@kernel.org,
	linux-mediatek@lists.infradead.org, dmurphy@ti.com,
	pmeerw@pmeerw.net, knaack.h@gmx.de,
	linux-arm-kernel@lists.infradead.org, shufan_lee@richtek.com
Subject: [PATCH v2 1/4] dt-bindings: mfd: Add bindings for the Mediatek MT6360 PMIC
Date: Fri, 19 Jun 2020 19:53:48 +0800	[thread overview]
Message-ID: <1592567631-20363-2-git-send-email-gene.chen.richtek@gmail.com> (raw)
In-Reply-To: <1592567631-20363-1-git-send-email-gene.chen.richtek@gmail.com>

From: Gene Chen <gene_chen@richtek.com>

Add devicetree binding document support Mediatek MT6360 PMIC

Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
 Documentation/devicetree/bindings/mfd/mt6360.txt | 122 +++++++++++++++++++++++
 include/dt-bindings/mfd/mt6360.h                 |  15 +++
 2 files changed, 137 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.txt
 create mode 100644 include/dt-bindings/mfd/mt6360.h

diff --git a/Documentation/devicetree/bindings/mfd/mt6360.txt b/Documentation/devicetree/bindings/mfd/mt6360.txt
new file mode 100644
index 0000000..7d7d349
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mt6360.txt
@@ -0,0 +1,122 @@
+MediaTek MT6360 PMIC Driver
+
+MT6360 is a multifunction device with the following sub modules:
+It is interfaced to host controller using I2C interface.
+This document describes the binding for PMIC device and its sub module.
+
+- ADC
+- Battery Charger/OTG boost
+- Flash LED/RGB LED/moonlight LED
+- 2-channel Buck and 6-channel LDO
+- USB_PD
+
+Required properties:
+- compatible:	Must be "mediatek,mt6360-pmu"
+- reg:		Specifies the I2C slave address of PMIC block, Must be <0x34>
+- interrupts:	I2C device IRQ line connected to the main SoC.
+
+Optional subnodes:
+- ADC
+	Required properties:
+		- compatible: "mediatek,mt6360-adc"
+- battery charger/OTG boost
+	Required properties:
+		- compatible: "mediatek,mt6360-chg"
+- Flash LED/RGB LED/moonlight LED
+	Required properties:
+		- compatible: "mediatek,mt6360-led"
+- 2-channel Buck and 6-channel LDO
+	Required properties:
+		- compatible: "mediatek,mt6360-regulator"
+- USB_PD
+	Required properties:
+		- compatible: "mediatek,mt6360-tcpc"
+
+Example:
+
+	#include <dt-bindings/interrupt-controller/irq.h>
+	#include <dt-bindings/mfd/mt6360.h>
+
+	mt6360@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		wakeup-source;
+		interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		adc {
+			compatible = "mediatek,mt6360-adc";
+			#io-channel-cells = <1>;
+		};
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN3-supply = <&BUCK2>;
+			buck1 {
+				regulator-compatible = "BUCK1";
+				regulator-name = "mt6360,buck1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+			};
+			BUCK2: buck2 {
+				regulator-compatible = "BUCK2";
+				regulator-name = "mt6360,buck2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+			};
+			ldo6 {
+				regulator-compatible = "LDO6";
+				regulator-name = "mt6360,ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo7 {
+				regulator-compatible = "LDO7";
+				regulator-name = "mt6360,ldo7";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo1 {
+				regulator-compatible = "LDO1";
+				regulator-name = "mt6360,ldo1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo2 {
+				regulator-compatible = "LDO2";
+				regulator-name = "mt6360,ldo2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo3 {
+				regulator-compatible = "LDO3";
+				regulator-name = "mt6360,ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+			ldo5 {
+				regulator-compatible = "LDO5";
+				regulator-name = "mt6360,ldo5";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+		};
+	};
diff --git a/include/dt-bindings/mfd/mt6360.h b/include/dt-bindings/mfd/mt6360.h
new file mode 100644
index 0000000..6368388
--- /dev/null
+++ b/include/dt-bindings/mfd/mt6360.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides macros for MT6360 device bindings.
+ *
+ * Copyright (c) 2020 Mediatek Inc.
+ */
+
+#ifndef __DT_BINDINGS_MT6360_H__
+#define __DT_BINDINGS_MT6360_H__
+
+#define MT6360_OPMODE_LP		(2)
+#define MT6360_OPMODE_ULP		(3)
+#define MT6360_OPMODE_NORMAL		(0)
+
+#endif /* __DT_BINDINGS_MT6360_H__ */
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-06-19 11:54 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-19 11:53 [PATCH v2 0/4] dt-bindings: mfd: Add bindings for the Mediatek MT6360 Gene Chen
2020-06-19 11:53 ` Gene Chen
2020-06-19 11:53 ` Gene Chen
2020-06-19 11:53 ` Gene Chen [this message]
2020-06-19 11:53   ` [PATCH v2 1/4] dt-bindings: mfd: Add bindings for the Mediatek MT6360 PMIC Gene Chen
2020-06-19 11:53   ` Gene Chen
2020-06-22 10:24   ` Lee Jones
2020-06-19 11:53 ` [PATCH v2 2/4] mfd: mt6360: implement i2c R/W with CRC Gene Chen
2020-06-19 11:53   ` Gene Chen
2020-06-19 11:53   ` Gene Chen
2020-07-01  7:16   ` Lee Jones
2020-07-01  7:16     ` Lee Jones
2020-07-01  7:16     ` Lee Jones
2020-07-02  8:29     ` Gene Chen
2020-07-02  8:29       ` Gene Chen
2020-07-02  8:29       ` Gene Chen
2020-07-02 10:27       ` Lee Jones
2020-07-02 10:27         ` Lee Jones
2020-07-02 10:27         ` Lee Jones
2020-06-19 11:53 ` [PATCH v2 3/4] iio: adc: mt6360: Add ADC driver for MT6360 Gene Chen
2020-06-19 11:53   ` Gene Chen
2020-06-19 11:53   ` Gene Chen
2020-06-20 17:03   ` Jonathan Cameron
2020-06-20 17:03     ` Jonathan Cameron
2020-06-20 17:03     ` Jonathan Cameron
2020-06-19 11:53 ` [PATCH v2 4/4] regulator: mt6360: Add support for MT6360 regulator Gene Chen
2020-06-19 11:53   ` Gene Chen
2020-06-19 11:53   ` Gene Chen
2020-06-20 16:55 ` [PATCH v2 0/4] dt-bindings: mfd: Add bindings for the Mediatek MT6360 Jonathan Cameron
2020-06-20 16:55   ` Jonathan Cameron
2020-06-20 16:55   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1592567631-20363-2-git-send-email-gene.chen.richtek@gmail.com \
    --to=gene.chen.richtek@gmail.com \
    --cc=benjamin.chao@mediatek.com \
    --cc=broonie@kernel.org \
    --cc=cy_huang@richtek.com \
    --cc=dmurphy@ti.com \
    --cc=gene_chen@richtek.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=pmeerw@pmeerw.net \
    --cc=shufan_lee@richtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.