All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tim Harvey <tharvey@gateworks.com>
To: Wolfgang Grandegger <wg@grandegger.com>,
	Marc Kleine-Budde <mkl@pengutronix.de>,
	linux-can@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: "David S . Miller" <davem@davemloft.net>,
	"Sean Nyekjaer" <sean@geanix.com>,
	"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
	"Timo Schlüßler" <schluessler@krause.de>,
	"Gustavo A . R . Silva" <gustavo@embeddedor.com>,
	"Tim Harvey" <tharvey@gateworks.com>
Subject: [RESEND PATCH] can: mcp251x: add support for half duplex controllers
Date: Thu, 23 Jul 2020 07:57:55 -0700	[thread overview]
Message-ID: <1595516275-1179-1-git-send-email-tharvey@gateworks.com> (raw)

Some SPI host controllers do not support full-duplex SPI and are
marked as such via the SPI_CONTROLLER_HALF_DUPLEX controller flag.

For such controllers use half duplex transactions but retain full
duplex transactions for the controllers that can handle those.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 drivers/net/can/spi/mcp251x.c | 34 +++++++++++++++++++++++++++-------
 1 file changed, 27 insertions(+), 7 deletions(-)

diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index 5009ff2..203ef20 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -290,8 +290,12 @@ static u8 mcp251x_read_reg(struct spi_device *spi, u8 reg)
 	priv->spi_tx_buf[0] = INSTRUCTION_READ;
 	priv->spi_tx_buf[1] = reg;
 
-	mcp251x_spi_trans(spi, 3);
-	val = priv->spi_rx_buf[2];
+	if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) {
+		spi_write_then_read(spi, priv->spi_tx_buf, 2, &val, 1);
+	} else {
+		mcp251x_spi_trans(spi, 3);
+		val = priv->spi_rx_buf[2];
+	}
 
 	return val;
 }
@@ -303,10 +307,18 @@ static void mcp251x_read_2regs(struct spi_device *spi, u8 reg, u8 *v1, u8 *v2)
 	priv->spi_tx_buf[0] = INSTRUCTION_READ;
 	priv->spi_tx_buf[1] = reg;
 
-	mcp251x_spi_trans(spi, 4);
+	if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) {
+		u8 val[2] = { 0 };
 
-	*v1 = priv->spi_rx_buf[2];
-	*v2 = priv->spi_rx_buf[3];
+		spi_write_then_read(spi, priv->spi_tx_buf, 2, val, 2);
+		*v1 = val[0];
+		*v2 = val[1];
+	} else {
+		mcp251x_spi_trans(spi, 4);
+
+		*v1 = priv->spi_rx_buf[2];
+		*v2 = priv->spi_rx_buf[3];
+	}
 }
 
 static void mcp251x_write_reg(struct spi_device *spi, u8 reg, u8 val)
@@ -409,8 +421,16 @@ static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
 			buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i);
 	} else {
 		priv->spi_tx_buf[RXBCTRL_OFF] = INSTRUCTION_READ_RXB(buf_idx);
-		mcp251x_spi_trans(spi, SPI_TRANSFER_BUF_LEN);
-		memcpy(buf, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN);
+		if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) {
+			spi_write_then_read(spi, priv->spi_tx_buf, 1,
+					    priv->spi_rx_buf,
+					    SPI_TRANSFER_BUF_LEN);
+			memcpy(buf + 1, priv->spi_rx_buf,
+			       SPI_TRANSFER_BUF_LEN - 1);
+		} else {
+			mcp251x_spi_trans(spi, SPI_TRANSFER_BUF_LEN);
+			memcpy(buf, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN);
+		}
 	}
 }
 
-- 
2.7.4

                 reply	other threads:[~2020-07-23 14:57 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1595516275-1179-1-git-send-email-tharvey@gateworks.com \
    --to=tharvey@gateworks.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=davem@davemloft.net \
    --cc=gustavo@embeddedor.com \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=schluessler@krause.de \
    --cc=sean@geanix.com \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.