From: Taniya Das <tdas@codeaurora.org>
To: "Stephen Boyd" <sboyd@kernel.org>,
"Michael Turquette " <mturquette@baylibre.com>
Cc: David Brown <david.brown@linaro.org>,
Rajendra Nayak <rnayak@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
Andy Gross <agross@kernel.org>,
devicetree@vger.kernel.org, robh@kernel.org, robh+dt@kernel.org,
Taniya Das <tdas@codeaurora.org>
Subject: [PATCH v3 3/4] dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings.
Date: Sat, 17 Oct 2020 00:13:34 +0530 [thread overview]
Message-ID: <1602873815-1677-4-git-send-email-tdas@codeaurora.org> (raw)
In-Reply-To: <1602873815-1677-1-git-send-email-tdas@codeaurora.org>
The Camera Subsystem clock provider have a bunch of generic properties
that are needed in a device tree. Add a YAML schemas for those.
Add clock ids for camera clocks which are required to bring the camera
subsystem out of reset.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
.../bindings/clock/qcom,sc7180-camcc.yaml | 73 +++++++++++++
include/dt-bindings/clock/qcom,camcc-sc7180.h | 121 +++++++++++++++++++++
2 files changed, 194 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
create mode 100644 include/dt-bindings/clock/qcom,camcc-sc7180.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
new file mode 100644
index 0000000..f49027e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SC7180
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm camera clock control module which supports the clocks, resets and
+ power domains on SC7180.
+
+ See also:
+ - dt-bindings/clock/qcom,camcc-sc7180.h
+
+properties:
+ compatible:
+ const: qcom,sc7180-camcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Camera_ahb clock from GCC
+ - description: Camera XO clock from GCC
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: iface
+ - const: xo
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@ad00000 {
+ compatible = "qcom,sc7180-camcc";
+ reg = <0x0ad00000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_XO_CLK>;
+ clock-names = "bi_tcxo", "iface", "xo";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/include/dt-bindings/clock/qcom,camcc-sc7180.h b/include/dt-bindings/clock/qcom,camcc-sc7180.h
new file mode 100644
index 0000000..ef7d3a0
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,camcc-sc7180.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_SC7180_H
+#define _DT_BINDINGS_CLK_QCOM_CAM_CC_SC7180_H
+
+/* CAM_CC clocks */
+#define CAM_CC_PLL2_OUT_EARLY 0
+#define CAM_CC_PLL0 1
+#define CAM_CC_PLL1 2
+#define CAM_CC_PLL2 3
+#define CAM_CC_PLL2_OUT_AUX 4
+#define CAM_CC_PLL3 5
+#define CAM_CC_CAMNOC_AXI_CLK 6
+#define CAM_CC_CCI_0_CLK 7
+#define CAM_CC_CCI_0_CLK_SRC 8
+#define CAM_CC_CCI_1_CLK 9
+#define CAM_CC_CCI_1_CLK_SRC 10
+#define CAM_CC_CORE_AHB_CLK 11
+#define CAM_CC_CPAS_AHB_CLK 12
+#define CAM_CC_CPHY_RX_CLK_SRC 13
+#define CAM_CC_CSI0PHYTIMER_CLK 14
+#define CAM_CC_CSI0PHYTIMER_CLK_SRC 15
+#define CAM_CC_CSI1PHYTIMER_CLK 16
+#define CAM_CC_CSI1PHYTIMER_CLK_SRC 17
+#define CAM_CC_CSI2PHYTIMER_CLK 18
+#define CAM_CC_CSI2PHYTIMER_CLK_SRC 19
+#define CAM_CC_CSI3PHYTIMER_CLK 20
+#define CAM_CC_CSI3PHYTIMER_CLK_SRC 21
+#define CAM_CC_CSIPHY0_CLK 22
+#define CAM_CC_CSIPHY1_CLK 23
+#define CAM_CC_CSIPHY2_CLK 24
+#define CAM_CC_CSIPHY3_CLK 25
+#define CAM_CC_FAST_AHB_CLK_SRC 26
+#define CAM_CC_ICP_APB_CLK 27
+#define CAM_CC_ICP_ATB_CLK 28
+#define CAM_CC_ICP_CLK 29
+#define CAM_CC_ICP_CLK_SRC 30
+#define CAM_CC_ICP_CTI_CLK 31
+#define CAM_CC_ICP_TS_CLK 32
+#define CAM_CC_IFE_0_AXI_CLK 33
+#define CAM_CC_IFE_0_CLK 34
+#define CAM_CC_IFE_0_CLK_SRC 35
+#define CAM_CC_IFE_0_CPHY_RX_CLK 36
+#define CAM_CC_IFE_0_CSID_CLK 37
+#define CAM_CC_IFE_0_CSID_CLK_SRC 38
+#define CAM_CC_IFE_0_DSP_CLK 39
+#define CAM_CC_IFE_1_AXI_CLK 40
+#define CAM_CC_IFE_1_CLK 41
+#define CAM_CC_IFE_1_CLK_SRC 42
+#define CAM_CC_IFE_1_CPHY_RX_CLK 43
+#define CAM_CC_IFE_1_CSID_CLK 44
+#define CAM_CC_IFE_1_CSID_CLK_SRC 45
+#define CAM_CC_IFE_1_DSP_CLK 46
+#define CAM_CC_IFE_LITE_CLK 47
+#define CAM_CC_IFE_LITE_CLK_SRC 48
+#define CAM_CC_IFE_LITE_CPHY_RX_CLK 49
+#define CAM_CC_IFE_LITE_CSID_CLK 50
+#define CAM_CC_IFE_LITE_CSID_CLK_SRC 51
+#define CAM_CC_IPE_0_AHB_CLK 52
+#define CAM_CC_IPE_0_AREG_CLK 53
+#define CAM_CC_IPE_0_AXI_CLK 54
+#define CAM_CC_IPE_0_CLK 55
+#define CAM_CC_IPE_0_CLK_SRC 56
+#define CAM_CC_JPEG_CLK 57
+#define CAM_CC_JPEG_CLK_SRC 58
+#define CAM_CC_LRME_CLK 59
+#define CAM_CC_LRME_CLK_SRC 60
+#define CAM_CC_MCLK0_CLK 61
+#define CAM_CC_MCLK0_CLK_SRC 62
+#define CAM_CC_MCLK1_CLK 63
+#define CAM_CC_MCLK1_CLK_SRC 64
+#define CAM_CC_MCLK2_CLK 65
+#define CAM_CC_MCLK2_CLK_SRC 66
+#define CAM_CC_MCLK3_CLK 67
+#define CAM_CC_MCLK3_CLK_SRC 68
+#define CAM_CC_MCLK4_CLK 69
+#define CAM_CC_MCLK4_CLK_SRC 70
+#define CAM_CC_BPS_AHB_CLK 71
+#define CAM_CC_BPS_AREG_CLK 72
+#define CAM_CC_BPS_AXI_CLK 73
+#define CAM_CC_BPS_CLK 74
+#define CAM_CC_BPS_CLK_SRC 75
+#define CAM_CC_SLOW_AHB_CLK_SRC 76
+#define CAM_CC_SOC_AHB_CLK 77
+#define CAM_CC_SYS_TMR_CLK 78
+
+/* CAM_CC power domains */
+#define BPS_GDSC 0
+#define IFE_0_GDSC 1
+#define IFE_1_GDSC 2
+#define IPE_0_GDSC 3
+#define TITAN_TOP_GDSC 4
+
+/* CAM_CC resets */
+#define CAM_CC_BPS_BCR 0
+#define CAM_CC_CAMNOC_BCR 1
+#define CAM_CC_CCI_0_BCR 2
+#define CAM_CC_CCI_1_BCR 3
+#define CAM_CC_CPAS_BCR 4
+#define CAM_CC_CSI0PHY_BCR 5
+#define CAM_CC_CSI1PHY_BCR 6
+#define CAM_CC_CSI2PHY_BCR 7
+#define CAM_CC_CSI3PHY_BCR 8
+#define CAM_CC_ICP_BCR 9
+#define CAM_CC_IFE_0_BCR 10
+#define CAM_CC_IFE_1_BCR 11
+#define CAM_CC_IFE_LITE_BCR 12
+#define CAM_CC_IPE_0_BCR 13
+#define CAM_CC_JPEG_BCR 14
+#define CAM_CC_LRME_BCR 15
+#define CAM_CC_MCLK0_BCR 16
+#define CAM_CC_MCLK1_BCR 17
+#define CAM_CC_MCLK2_BCR 18
+#define CAM_CC_MCLK3_BCR 19
+#define CAM_CC_MCLK4_BCR 20
+#define CAM_CC_TITAN_TOP_BCR 21
+
+#endif
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
next prev parent reply other threads:[~2020-10-16 18:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-16 18:43 [PATCH v3 0/4] Add Camera clock controller driver for SC7180 Taniya Das
2020-10-16 18:43 ` [PATCH v3 1/4] clk: qcom: clk-alpha-pll: Add support for helper functions Taniya Das
2020-11-05 2:30 ` Stephen Boyd
2020-10-16 18:43 ` [PATCH v3 2/4] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs Taniya Das
2020-11-05 2:30 ` Stephen Boyd
2020-10-16 18:43 ` Taniya Das [this message]
2020-10-19 20:17 ` [PATCH v3 3/4] dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings Rob Herring
2020-11-05 2:30 ` Stephen Boyd
2020-10-16 18:43 ` [PATCH v3 4/4] clk: qcom: camcc: Add camera clock controller driver for SC7180 Taniya Das
2020-11-05 2:31 ` Stephen Boyd
2020-11-06 12:16 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1602873815-1677-4-git-send-email-tdas@codeaurora.org \
--to=tdas@codeaurora.org \
--cc=agross@kernel.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.