From: Akhil P Oommen <akhilpo@codeaurora.org> To: freedreno@lists.freedesktop.org, devicetree@vger.kernel.org Cc: robh@kernel.org, dri-devel@freedesktop.org, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, jcrouse@codeaurora.org, mka@chromium.org, robdclark@gmail.com, dianders@chromium.org Subject: [PATCH v5 2/3] arm64: dts: qcom: sc7180: Add gpu cooling support Date: Fri, 30 Oct 2020 16:17:11 +0530 [thread overview] Message-ID: <1604054832-3114-2-git-send-email-akhilpo@codeaurora.org> (raw) In-Reply-To: <1604054832-3114-1-git-send-email-akhilpo@codeaurora.org> Add cooling-cells property and the cooling maps for the gpu tzones to support GPU cooling. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index d46b383..8e2000c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2,7 +2,7 @@ /* * SC7180 SoC device tree source * - * Copyright (c) 2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019-20, The Linux Foundation. All rights reserved. */ #include <dt-bindings/clock/qcom,dispcc-sc7180.h> @@ -1886,6 +1886,8 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; + interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>; interconnect-names = "gfx-mem"; @@ -3825,16 +3827,16 @@ }; gpuss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { gpuss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss0_crit: gpuss0_crit { @@ -3843,19 +3845,26 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpuss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens0 14>; trips { gpuss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss1_crit: gpuss1_crit { @@ -3864,6 +3873,13 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; aoss1-thermal { -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Akhil P Oommen <akhilpo@codeaurora.org> To: freedreno@lists.freedesktop.org, devicetree@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, dianders@chromium.org, mka@chromium.org, dri-devel@freedesktop.org Subject: [PATCH v5 2/3] arm64: dts: qcom: sc7180: Add gpu cooling support Date: Fri, 30 Oct 2020 16:17:11 +0530 [thread overview] Message-ID: <1604054832-3114-2-git-send-email-akhilpo@codeaurora.org> (raw) In-Reply-To: <1604054832-3114-1-git-send-email-akhilpo@codeaurora.org> Add cooling-cells property and the cooling maps for the gpu tzones to support GPU cooling. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index d46b383..8e2000c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2,7 +2,7 @@ /* * SC7180 SoC device tree source * - * Copyright (c) 2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019-20, The Linux Foundation. All rights reserved. */ #include <dt-bindings/clock/qcom,dispcc-sc7180.h> @@ -1886,6 +1886,8 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + #cooling-cells = <2>; + interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>; interconnect-names = "gfx-mem"; @@ -3825,16 +3827,16 @@ }; gpuss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens0 13>; trips { gpuss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss0_crit: gpuss0_crit { @@ -3843,19 +3845,26 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpuss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens0 14>; trips { gpuss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss1_crit: gpuss1_crit { @@ -3864,6 +3873,13 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; aoss1-thermal { -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-10-30 10:47 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-30 10:47 [PATCH v5 1/3] drm/msm: Add support for GPU cooling Akhil P Oommen 2020-10-30 10:47 ` Akhil P Oommen 2020-10-30 10:47 ` Akhil P Oommen [this message] 2020-10-30 10:47 ` [PATCH v5 2/3] arm64: dts: qcom: sc7180: Add gpu cooling support Akhil P Oommen 2020-11-11 4:50 ` Bjorn Andersson 2020-11-11 4:50 ` Bjorn Andersson 2020-10-30 10:47 ` [PATCH v5 3/3] dt-bindings: drm/msm/gpu: Add cooling device support Akhil P Oommen 2020-10-30 10:47 ` Akhil P Oommen 2020-11-04 20:03 ` Rob Herring 2020-11-04 20:03 ` Rob Herring 2020-11-04 20:58 ` [Freedreno] " Rob Clark 2020-11-04 20:58 ` Rob Clark 2020-11-06 7:30 ` Akhil P Oommen 2020-11-06 7:30 ` Akhil P Oommen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1604054832-3114-2-git-send-email-akhilpo@codeaurora.org \ --to=akhilpo@codeaurora.org \ --cc=devicetree@vger.kernel.org \ --cc=dianders@chromium.org \ --cc=dri-devel@freedesktop.org \ --cc=freedreno@lists.freedesktop.org \ --cc=jcrouse@codeaurora.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mka@chromium.org \ --cc=robdclark@gmail.com \ --cc=robh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.