All of lore.kernel.org
 help / color / mirror / Atom feed
From: Karthikeyan Periyasamy <periyasa@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
	Karthikeyan Periyasamy <periyasa@codeaurora.org>
Subject: [PATCH] ath11k: fix wmi init configuration
Date: Wed,  4 Nov 2020 23:17:00 +0530	[thread overview]
Message-ID: <1604512020-25197-1-git-send-email-periyasa@codeaurora.org> (raw)

Assign the correct hw_op ath11k_init_wmi_config_ipq8074 to
the hw IPQ8074. Also update the correct TWT radio count.
Incorrect TWT radio count cause TWT feature fails on radio2
because physical device count is hardcoded to 2. so set
the value dynamically.

Found this during code review.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2

Fixes: 2d4bcbed5b7d53e1 ("ath11k: initialize wmi config based on hw_params")
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/hw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index 11a411b..66331da 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -127,7 +127,7 @@ static void ath11k_init_wmi_config_ipq8074(struct ath11k_base *ab,
 	config->beacon_tx_offload_max_vdev = ab->num_radios * TARGET_MAX_BCN_OFFLD;
 	config->rx_batchmode = TARGET_RX_BATCHMODE;
 	config->peer_map_unmap_v2_support = 1;
-	config->twt_ap_pdev_count = 2;
+	config->twt_ap_pdev_count = ab->num_radios;
 	config->twt_ap_sta_count = 1000;
 }
 
@@ -157,7 +157,7 @@ static int ath11k_hw_mac_id_to_srng_id_qca6390(struct ath11k_hw_params *hw,
 
 const struct ath11k_hw_ops ipq8074_ops = {
 	.get_hw_mac_from_pdev_id = ath11k_hw_ipq8074_mac_from_pdev_id,
-	.wmi_init_config = ath11k_init_wmi_config_qca6390,
+	.wmi_init_config = ath11k_init_wmi_config_ipq8074,
 	.mac_id_to_pdev_id = ath11k_hw_mac_id_to_pdev_id_ipq8074,
 	.mac_id_to_srng_id = ath11k_hw_mac_id_to_srng_id_ipq8074,
 };
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Karthikeyan Periyasamy <periyasa@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: Karthikeyan Periyasamy <periyasa@codeaurora.org>,
	linux-wireless@vger.kernel.org
Subject: [PATCH] ath11k: fix wmi init configuration
Date: Wed,  4 Nov 2020 23:17:00 +0530	[thread overview]
Message-ID: <1604512020-25197-1-git-send-email-periyasa@codeaurora.org> (raw)

Assign the correct hw_op ath11k_init_wmi_config_ipq8074 to
the hw IPQ8074. Also update the correct TWT radio count.
Incorrect TWT radio count cause TWT feature fails on radio2
because physical device count is hardcoded to 2. so set
the value dynamically.

Found this during code review.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2

Fixes: 2d4bcbed5b7d53e1 ("ath11k: initialize wmi config based on hw_params")
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/hw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index 11a411b..66331da 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -127,7 +127,7 @@ static void ath11k_init_wmi_config_ipq8074(struct ath11k_base *ab,
 	config->beacon_tx_offload_max_vdev = ab->num_radios * TARGET_MAX_BCN_OFFLD;
 	config->rx_batchmode = TARGET_RX_BATCHMODE;
 	config->peer_map_unmap_v2_support = 1;
-	config->twt_ap_pdev_count = 2;
+	config->twt_ap_pdev_count = ab->num_radios;
 	config->twt_ap_sta_count = 1000;
 }
 
@@ -157,7 +157,7 @@ static int ath11k_hw_mac_id_to_srng_id_qca6390(struct ath11k_hw_params *hw,
 
 const struct ath11k_hw_ops ipq8074_ops = {
 	.get_hw_mac_from_pdev_id = ath11k_hw_ipq8074_mac_from_pdev_id,
-	.wmi_init_config = ath11k_init_wmi_config_qca6390,
+	.wmi_init_config = ath11k_init_wmi_config_ipq8074,
 	.mac_id_to_pdev_id = ath11k_hw_mac_id_to_pdev_id_ipq8074,
 	.mac_id_to_srng_id = ath11k_hw_mac_id_to_srng_id_ipq8074,
 };
-- 
2.7.4


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

             reply	other threads:[~2020-11-04 17:47 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-04 17:47 Karthikeyan Periyasamy [this message]
2020-11-04 17:47 ` [PATCH] ath11k: fix wmi init configuration Karthikeyan Periyasamy
2020-11-07  8:05 ` Kalle Valo
2020-11-07  8:05 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1604512020-25197-1-git-send-email-periyasa@codeaurora.org \
    --to=periyasa@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.