All of lore.kernel.org
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <jonathanh@nvidia.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [RESEND PATCH] regulator: core: return zero for selectors lower than linear_min_sel
Date: Wed, 25 Nov 2020 19:25:47 +0200	[thread overview]
Message-ID: <1606325147-606-1-git-send-email-claudiu.beznea@microchip.com> (raw)

Selectors lower than linear_min_sel should not be considered invalid.
Thus return zero in case _regulator_list_voltage(),
regulator_list_hardware_vsel() or regulator_list_voltage_table()
receives such selectors as argument.

Fixes: bdcd1177578c ("regulator: core: validate selector against linear_min_sel")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/regulator/core.c    | 10 ++++++----
 drivers/regulator/helpers.c |  5 +++--
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 216b0cbce199..ca03d8e70bd1 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2956,9 +2956,10 @@ static int _regulator_list_voltage(struct regulator_dev *rdev,
 		return rdev->desc->fixed_uV;
 
 	if (ops->list_voltage) {
-		if (selector >= rdev->desc->n_voltages ||
-		    selector < rdev->desc->linear_min_sel)
+		if (selector >= rdev->desc->n_voltages)
 			return -EINVAL;
+		if (selector < rdev->desc->linear_min_sel)
+			return 0;
 		if (lock)
 			regulator_lock(rdev);
 		ret = ops->list_voltage(rdev, selector);
@@ -3108,9 +3109,10 @@ int regulator_list_hardware_vsel(struct regulator *regulator,
 	struct regulator_dev *rdev = regulator->rdev;
 	const struct regulator_ops *ops = rdev->desc->ops;
 
-	if (selector >= rdev->desc->n_voltages ||
-	    selector < rdev->desc->linear_min_sel)
+	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
+	if (selector < rdev->desc->linear_min_sel)
+		return 0;
 	if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
 		return -EOPNOTSUPP;
 
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index 974f1a63993d..f42b394a0c46 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -647,9 +647,10 @@ int regulator_list_voltage_table(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	if (selector >= rdev->desc->n_voltages ||
-	    selector < rdev->desc->linear_min_sel)
+	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
+	if (selector < rdev->desc->linear_min_sel)
+		return 0;
 
 	return rdev->desc->volt_table[selector];
 }
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, jonathanh@nvidia.com
Subject: [RESEND PATCH] regulator: core: return zero for selectors lower than linear_min_sel
Date: Wed, 25 Nov 2020 19:25:47 +0200	[thread overview]
Message-ID: <1606325147-606-1-git-send-email-claudiu.beznea@microchip.com> (raw)

Selectors lower than linear_min_sel should not be considered invalid.
Thus return zero in case _regulator_list_voltage(),
regulator_list_hardware_vsel() or regulator_list_voltage_table()
receives such selectors as argument.

Fixes: bdcd1177578c ("regulator: core: validate selector against linear_min_sel")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/regulator/core.c    | 10 ++++++----
 drivers/regulator/helpers.c |  5 +++--
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 216b0cbce199..ca03d8e70bd1 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2956,9 +2956,10 @@ static int _regulator_list_voltage(struct regulator_dev *rdev,
 		return rdev->desc->fixed_uV;
 
 	if (ops->list_voltage) {
-		if (selector >= rdev->desc->n_voltages ||
-		    selector < rdev->desc->linear_min_sel)
+		if (selector >= rdev->desc->n_voltages)
 			return -EINVAL;
+		if (selector < rdev->desc->linear_min_sel)
+			return 0;
 		if (lock)
 			regulator_lock(rdev);
 		ret = ops->list_voltage(rdev, selector);
@@ -3108,9 +3109,10 @@ int regulator_list_hardware_vsel(struct regulator *regulator,
 	struct regulator_dev *rdev = regulator->rdev;
 	const struct regulator_ops *ops = rdev->desc->ops;
 
-	if (selector >= rdev->desc->n_voltages ||
-	    selector < rdev->desc->linear_min_sel)
+	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
+	if (selector < rdev->desc->linear_min_sel)
+		return 0;
 	if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
 		return -EOPNOTSUPP;
 
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index 974f1a63993d..f42b394a0c46 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -647,9 +647,10 @@ int regulator_list_voltage_table(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	if (selector >= rdev->desc->n_voltages ||
-	    selector < rdev->desc->linear_min_sel)
+	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
+	if (selector < rdev->desc->linear_min_sel)
+		return 0;
 
 	return rdev->desc->volt_table[selector];
 }
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-11-25 17:26 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-25 17:25 Claudiu Beznea [this message]
2020-11-25 17:25 ` [RESEND PATCH] regulator: core: return zero for selectors lower than linear_min_sel Claudiu Beznea
2020-11-26 20:06 ` Mark Brown
2020-11-26 20:06   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1606325147-606-1-git-send-email-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=broonie@kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.