From: Sameer Pujar <spujar@nvidia.com> To: <broonie@kernel.org>, <robh+dt@kernel.org>, <thierry.reding@gmail.com> Cc: <jonathanh@nvidia.com>, <kuninori.morimoto.gx@renesas.com>, <alsa-devel@alsa-project.org>, <devicetree@vger.kernel.org>, <linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <sharadg@nvidia.com>, Sameer Pujar <spujar@nvidia.com> Subject: [PATCH v6 5/6] arm64: tegra: Audio graph header for Tegra210 Date: Thu, 26 Nov 2020 23:33:42 +0530 [thread overview] Message-ID: <1606413823-19885-6-git-send-email-spujar@nvidia.com> (raw) In-Reply-To: <1606413823-19885-1-git-send-email-spujar@nvidia.com> Expose a header which describes DT bindings required to use audio-graph based sound card. All Tegra210 based platforms can include this header and add platform specific information. Currently, from SoC point of view, all links are exposed for ADMAIF, AHUB, I2S and DMIC components. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> --- .../boot/dts/nvidia/tegra210-audio-graph.dtsi | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi diff --git a/arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi new file mode 100644 index 0000000..5c54358 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + tegra_sound { + status = "disabled"; + + clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + clock-names = "pll_a", "plla_out0"; + + assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA210_CLK_EXTERN1>; + assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <368640000>, <49152000>, <12288000>; + }; +}; + +&tegra_admaif { + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif1_port: port@0 { + reg = <0>; + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + admaif2_port: port@1 { + reg = <1>; + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + admaif3_port: port@2 { + reg = <2>; + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + admaif4_port: port@3 { + reg = <3>; + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + admaif5_port: port@4 { + reg = <4>; + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + admaif6_port: port@5 { + reg = <5>; + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + admaif7_port: port@6 { + reg = <6>; + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + admaif8_port: port@7 { + reg = <7>; + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + admaif9_port: port@8 { + reg = <8>; + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + admaif10_port: port@9 { + reg = <9>; + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + }; +}; + +&tegra_ahub { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + port@1 { + reg = <0x1>; + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + port@2 { + reg = <0x2>; + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + port@3 { + reg = <0x3>; + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + port@4 { + reg = <0x4>; + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + port@5 { + reg = <0x5>; + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + port@6 { + reg = <0x6>; + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + port@7 { + reg = <0x7>; + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + port@8 { + reg = <0x8>; + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + port@9 { + reg = <0x9>; + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + }; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Sameer Pujar <spujar@nvidia.com> To: <broonie@kernel.org>, <robh+dt@kernel.org>, <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, kuninori.morimoto.gx@renesas.com, Sameer Pujar <spujar@nvidia.com>, linux-kernel@vger.kernel.org, jonathanh@nvidia.com, sharadg@nvidia.com, linux-tegra@vger.kernel.org Subject: [PATCH v6 5/6] arm64: tegra: Audio graph header for Tegra210 Date: Thu, 26 Nov 2020 23:33:42 +0530 [thread overview] Message-ID: <1606413823-19885-6-git-send-email-spujar@nvidia.com> (raw) In-Reply-To: <1606413823-19885-1-git-send-email-spujar@nvidia.com> Expose a header which describes DT bindings required to use audio-graph based sound card. All Tegra210 based platforms can include this header and add platform specific information. Currently, from SoC point of view, all links are exposed for ADMAIF, AHUB, I2S and DMIC components. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> --- .../boot/dts/nvidia/tegra210-audio-graph.dtsi | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi diff --git a/arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi new file mode 100644 index 0000000..5c54358 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + tegra_sound { + status = "disabled"; + + clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + clock-names = "pll_a", "plla_out0"; + + assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA210_CLK_EXTERN1>; + assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <368640000>, <49152000>, <12288000>; + }; +}; + +&tegra_admaif { + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif1_port: port@0 { + reg = <0>; + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + admaif2_port: port@1 { + reg = <1>; + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + admaif3_port: port@2 { + reg = <2>; + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + admaif4_port: port@3 { + reg = <3>; + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + admaif5_port: port@4 { + reg = <4>; + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + admaif6_port: port@5 { + reg = <5>; + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + admaif7_port: port@6 { + reg = <6>; + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + admaif8_port: port@7 { + reg = <7>; + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + admaif9_port: port@8 { + reg = <8>; + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + admaif10_port: port@9 { + reg = <9>; + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + }; +}; + +&tegra_ahub { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + port@1 { + reg = <0x1>; + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + port@2 { + reg = <0x2>; + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + port@3 { + reg = <0x3>; + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + port@4 { + reg = <0x4>; + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + port@5 { + reg = <0x5>; + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + port@6 { + reg = <0x6>; + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + port@7 { + reg = <0x7>; + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + port@8 { + reg = <0x8>; + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + port@9 { + reg = <0x9>; + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + }; +}; -- 2.7.4
next prev parent reply other threads:[~2020-11-26 18:04 UTC|newest] Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-26 18:03 [PATCH v6 0/6] Tegra210 audio graph card Sameer Pujar 2020-11-26 18:03 ` Sameer Pujar 2020-11-26 18:03 ` [PATCH v6 1/6] ASoC: dt-bindings: tegra: Add graph bindings Sameer Pujar 2020-11-26 18:03 ` Sameer Pujar 2020-11-26 18:03 ` [PATCH v6 2/6] ASoC: dt-bindings: tegra: Add json-schema for Tegra audio graph card Sameer Pujar 2020-11-26 18:03 ` Sameer Pujar 2020-11-26 18:03 ` [PATCH v6 3/6] ASoC: tegra: Add audio graph based card driver Sameer Pujar 2020-11-26 18:03 ` Sameer Pujar 2020-11-26 18:03 ` [PATCH v6 4/6] arm64: defconfig: Enable Tegra audio graph " Sameer Pujar 2020-11-26 18:03 ` Sameer Pujar 2020-11-26 18:03 ` Sameer Pujar [this message] 2020-11-26 18:03 ` [PATCH v6 5/6] arm64: tegra: Audio graph header for Tegra210 Sameer Pujar 2020-11-26 18:03 ` [PATCH v6 6/6] arm64: tegra: Audio graph sound card for Jetson Nano and TX1 Sameer Pujar 2020-11-26 18:03 ` Sameer Pujar 2020-12-01 13:57 ` [PATCH v6 0/6] Tegra210 audio graph card Mark Brown 2020-12-01 13:57 ` Mark Brown 2020-12-07 4:52 ` Sameer Pujar 2020-12-07 4:52 ` Sameer Pujar 2020-12-07 12:31 ` Mark Brown 2020-12-07 12:31 ` Mark Brown 2020-12-08 3:54 ` Sameer Pujar 2020-12-08 3:54 ` Sameer Pujar 2020-12-08 12:13 ` Mark Brown 2020-12-08 12:13 ` Mark Brown 2020-12-08 12:46 ` Sameer Pujar 2020-12-08 14:48 ` Re: " Sameer Pujar 2020-12-08 14:48 ` Sameer Pujar 2020-12-08 15:22 ` Mark Brown 2020-12-08 15:22 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1606413823-19885-6-git-send-email-spujar@nvidia.com \ --to=spujar@nvidia.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=jonathanh@nvidia.com \ --cc=kuninori.morimoto.gx@renesas.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-tegra@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=sharadg@nvidia.com \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.