From: mdurnev@gmail.com To: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, noralf@tronnes.org Cc: mikhail_durnev@mentor.com Subject: [PATCH v2 2/3] drm/tiny: Add driver for ili9341 with parallel bus Date: Tue, 1 Dec 2020 09:05:35 +1000 [thread overview] Message-ID: <1606777536-14783-3-git-send-email-mikhail_durnev@mentor.com> (raw) In-Reply-To: <1606777536-14783-1-git-send-email-mikhail_durnev@mentor.com> From: Mikhail Durnev <mikhail_durnev@mentor.com> MRB2801 display module [1] is an example of ILI9341 display that connects to Intel 8080 parallel bus. Its connector is compatible with the ALIENTEK STM32 development board. It can be used with the drm/mipi-dbi bus driver if the bus is emulated with GPIO. [1] http://www.lcdwiki.com/2.8inch_16BIT_Module_ILI9341_SKU:MRB2801 Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com> --- drivers/gpu/drm/tiny/Kconfig | 13 ++ drivers/gpu/drm/tiny/Makefile | 1 + drivers/gpu/drm/tiny/ili9341_gpio.c | 290 ++++++++++++++++++++++++++++++++++++ 3 files changed, 304 insertions(+) create mode 100644 drivers/gpu/drm/tiny/ili9341_gpio.c diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig index 2b6414f..e48e268 100644 --- a/drivers/gpu/drm/tiny/Kconfig +++ b/drivers/gpu/drm/tiny/Kconfig @@ -66,6 +66,19 @@ config TINYDRM_ILI9341 If M is selected the module will be called ili9341. +config TINYDRM_ILI9341_GPIO + tristate "DRM support for ILI9341 display panels with parallel bus interface over GPIO" + depends on DRM + select DRM_KMS_HELPER + select DRM_KMS_CMA_HELPER + select DRM_MIPI_DBI + select BACKLIGHT_CLASS_DEVICE + help + DRM driver for the following Ilitek ILI9341 panels: + * MRB2801 2.8" 240x320 TFT + + If M is selected the module will be called ili9341_gpio. + config TINYDRM_ILI9486 tristate "DRM support for ILI9486 display panels" depends on DRM && SPI diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile index 6ae4e9e5..1ad2c0d 100644 --- a/drivers/gpu/drm/tiny/Makefile +++ b/drivers/gpu/drm/tiny/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_GM12U320) += gm12u320.o obj-$(CONFIG_TINYDRM_HX8357D) += hx8357d.o obj-$(CONFIG_TINYDRM_ILI9225) += ili9225.o obj-$(CONFIG_TINYDRM_ILI9341) += ili9341.o +obj-$(CONFIG_TINYDRM_ILI9341_GPIO) += ili9341_gpio.o obj-$(CONFIG_TINYDRM_ILI9486) += ili9486.o obj-$(CONFIG_TINYDRM_MI0283QT) += mi0283qt.o obj-$(CONFIG_TINYDRM_REPAPER) += repaper.o diff --git a/drivers/gpu/drm/tiny/ili9341_gpio.c b/drivers/gpu/drm/tiny/ili9341_gpio.c new file mode 100644 index 0000000..de8a63b8 --- /dev/null +++ b/drivers/gpu/drm/tiny/ili9341_gpio.c @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * DRM driver for Ilitek ILI9341 panels with parallel bus interface + * + * Copyright 2020 Mikhail Durnev <mikhail_durnev@mentor.com> + * + * Based on ili9341.c: + * Copyright 2018 David Lechner <david@lechnology.com> + * + * Based on mi0283qt.c: + * Copyright 2016 Noralf Trønnes + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_fb_helper.h> +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_mipi_dbi.h> +#include <drm/drm_modeset_helper.h> +#include <video/mipi_display.h> + +#define ILI9341_FRMCTR1 0xb1 +#define ILI9341_DISCTRL 0xb6 +#define ILI9341_ETMOD 0xb7 + +#define ILI9341_PWCTRL1 0xc0 +#define ILI9341_PWCTRL2 0xc1 +#define ILI9341_VMCTRL1 0xc5 +#define ILI9341_VMCTRL2 0xc7 +#define ILI9341_PWCTRLA 0xcb +#define ILI9341_PWCTRLB 0xcf + +#define ILI9341_PGAMCTRL 0xe0 +#define ILI9341_NGAMCTRL 0xe1 +#define ILI9341_DTCTRLA 0xe8 +#define ILI9341_DTCTRLB 0xea +#define ILI9341_PWRSEQ 0xed + +#define ILI9341_EN3GAM 0xf2 +#define ILI9341_PUMPCTRL 0xf7 + +#define ILI9341_MADCTL_BGR BIT(3) +#define ILI9341_MADCTL_MV BIT(5) +#define ILI9341_MADCTL_MX BIT(6) +#define ILI9341_MADCTL_MY BIT(7) + +static void yx240qv29_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *crtc_state, + struct drm_plane_state *plane_state) +{ + struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); + struct mipi_dbi *dbi = &dbidev->dbi; + u8 addr_mode; + int ret, idx; + + if (!drm_dev_enter(pipe->crtc.dev, &idx)) + return; + + DRM_DEBUG_KMS("\n"); + + ret = mipi_dbi_poweron_conditional_reset(dbidev); + if (ret < 0) + goto out_exit; + if (ret == 1) + goto out_enable; + + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF); + + mipi_dbi_command(dbi, ILI9341_PWCTRLB, 0x00, 0xc1, 0x30); + mipi_dbi_command(dbi, ILI9341_PWRSEQ, 0x64, 0x03, 0x12, 0x81); + mipi_dbi_command(dbi, ILI9341_DTCTRLA, 0x85, 0x00, 0x78); + mipi_dbi_command(dbi, ILI9341_PWCTRLA, 0x39, 0x2c, 0x00, 0x34, 0x02); + mipi_dbi_command(dbi, ILI9341_PUMPCTRL, 0x20); + mipi_dbi_command(dbi, ILI9341_DTCTRLB, 0x00, 0x00); + + /* Power Control */ + mipi_dbi_command(dbi, ILI9341_PWCTRL1, 0x23); + mipi_dbi_command(dbi, ILI9341_PWCTRL2, 0x10); + /* VCOM */ + mipi_dbi_command(dbi, ILI9341_VMCTRL1, 0x3e, 0x28); + mipi_dbi_command(dbi, ILI9341_VMCTRL2, 0x86); + + /* Memory Access Control */ + mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); + + /* Frame Rate */ + mipi_dbi_command(dbi, ILI9341_FRMCTR1, 0x00, 0x1b); + + /* Gamma */ + mipi_dbi_command(dbi, ILI9341_EN3GAM, 0x00); + mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, 0x01); + mipi_dbi_command(dbi, ILI9341_PGAMCTRL, + 0x0f, 0x31, 0x2b, 0x0c, 0x0e, 0x08, 0x4e, 0xf1, + 0x37, 0x07, 0x10, 0x03, 0x0e, 0x09, 0x00); + mipi_dbi_command(dbi, ILI9341_NGAMCTRL, + 0x00, 0x0e, 0x14, 0x03, 0x11, 0x07, 0x31, 0xc1, + 0x48, 0x08, 0x0f, 0x0c, 0x31, 0x36, 0x0f); + + /* DDRAM */ + mipi_dbi_command(dbi, ILI9341_ETMOD, 0x07); + + /* Display */ + mipi_dbi_command(dbi, ILI9341_DISCTRL, 0x08, 0x82, 0x27, 0x00); + mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); + msleep(100); + + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); + msleep(100); + +out_enable: + switch (dbidev->rotation) { + default: + addr_mode = ILI9341_MADCTL_MX; + break; + case 90: + addr_mode = ILI9341_MADCTL_MV; + break; + case 180: + addr_mode = ILI9341_MADCTL_MY; + break; + case 270: + addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | + ILI9341_MADCTL_MX; + break; + } + addr_mode |= ILI9341_MADCTL_BGR; + mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); + mipi_dbi_enable_flush(dbidev, crtc_state, plane_state); +out_exit: + drm_dev_exit(idx); +} + +static const struct drm_simple_display_pipe_funcs ili9341gpio_pipe_funcs = { + .enable = yx240qv29_enable, + .disable = mipi_dbi_pipe_disable, + .update = mipi_dbi_pipe_update, + .prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb, +}; + +static const struct drm_display_mode yx240qv29_mode = { + DRM_SIMPLE_MODE(240, 320, 37, 49), +}; + +DEFINE_DRM_GEM_CMA_FOPS(ili9341gpio_fops); + +static struct drm_driver ili9341gpio_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &ili9341gpio_fops, + .release = mipi_dbi_release, + DRM_GEM_CMA_VMAP_DRIVER_OPS, + .debugfs_init = mipi_dbi_debugfs_init, + .name = "ili9341gpio", + .desc = "Ilitek ILI9341", + .date = "20201114", + .major = 1, + .minor = 0, +}; + +static const struct of_device_id ili9341gpio_of_match[] = { + { .compatible = "ronbo,mrb2801" }, + { } +}; +MODULE_DEVICE_TABLE(of, ili9341gpio_of_match); + +static int ili9341gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mipi_dbi_dev *dbidev; + struct drm_device *drm; + struct mipi_dbi *dbi; + struct gpio_desc *dc; + struct gpio_desc *wr; + struct gpio_descs *db; + u32 rotation = 0; + u32 wr_delays[2] = {15, 60}; + int ret; + + dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL); + if (!dbidev) + return -ENOMEM; + + dbi = &dbidev->dbi; + drm = &dbidev->drm; + ret = devm_drm_dev_init(dev, drm, &ili9341gpio_driver); + if (ret) { + kfree(dbidev); + return ret; + } + + drm_mode_config_init(drm); + + dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(dbi->reset)) { + DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n"); + return PTR_ERR(dbi->reset); + } + + dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_HIGH); + if (IS_ERR(dc)) { + DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n"); + return PTR_ERR(dc); + } + + wr = devm_gpiod_get(dev, "wr", GPIOD_OUT_HIGH); + if (IS_ERR(wr)) { + DRM_DEV_ERROR(dev, "Failed to get gpio 'wr'\n"); + return PTR_ERR(wr); + } + + db = devm_gpiod_get_array(dev, "db", GPIOD_OUT_LOW); + if (IS_ERR(db)) { + DRM_DEV_ERROR(dev, "Failed to get gpio 'db'\n"); + return PTR_ERR(db); + } + if (db->ndescs != 16 && db->ndescs != 8) { + /* + * The data bus can be either 8 or 16 bits wide. + * ILI9341 can work with 6, 8, 9, 16, and 18-bit parallel interfaces, + * but the MRB2801 board supports only 8 or 16-bit interfaces. + */ + DRM_DEV_ERROR(dev, "Wrong number of bits in gpio 'db': %u\n", db->ndescs); + return PTR_ERR(db); + } + + dbidev->backlight = devm_of_find_backlight(dev); + if (IS_ERR(dbidev->backlight)) + return PTR_ERR(dbidev->backlight); + + device_property_read_u32(dev, "rotation", &rotation); + + device_property_read_u32_array(dev, "wr-up-down-delays", wr_delays, 2); + + ret = mipi_dbi_gpio_init(dbi, dc, wr, db, wr_delays[0], wr_delays[1]); + if (ret) + return ret; + + ret = mipi_dbi_dev_init(dbidev, &ili9341gpio_pipe_funcs, &yx240qv29_mode, rotation); + if (ret) + return ret; + + drm_mode_config_reset(drm); + + ret = drm_dev_register(drm, 0); + if (ret) + return ret; + + platform_set_drvdata(pdev, drm); + + drm_fbdev_generic_setup(drm, 0); + + return 0; +} + +static int ili9341gpio_remove(struct platform_device *pdev) +{ + struct drm_device *drm = platform_get_drvdata(pdev); + + drm_dev_unplug(drm); + drm_atomic_helper_shutdown(drm); + + return 0; +} + +static void ili9341gpio_shutdown(struct platform_device *pdev) +{ + drm_atomic_helper_shutdown(platform_get_drvdata(pdev)); +} + +static struct platform_driver ili9341gpio_platform_driver = { + .driver = { + .name = "ili9341gpio", + .of_match_table = ili9341gpio_of_match, + }, + .probe = ili9341gpio_probe, + .remove = ili9341gpio_remove, + .shutdown = ili9341gpio_shutdown, +}; +module_platform_driver(ili9341gpio_platform_driver); + +MODULE_DESCRIPTION("Ilitek ILI9341 8/16-bit DRM driver"); +MODULE_AUTHOR("Mikhail Durnev <mikhail_durnev@mentor.com>"); +MODULE_LICENSE("GPL"); -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: mdurnev@gmail.com To: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, noralf@tronnes.org Cc: mikhail_durnev@mentor.com Subject: [PATCH v2 2/3] drm/tiny: Add driver for ili9341 with parallel bus Date: Tue, 1 Dec 2020 09:05:35 +1000 [thread overview] Message-ID: <1606777536-14783-3-git-send-email-mikhail_durnev@mentor.com> (raw) In-Reply-To: <1606777536-14783-1-git-send-email-mikhail_durnev@mentor.com> From: Mikhail Durnev <mikhail_durnev@mentor.com> MRB2801 display module [1] is an example of ILI9341 display that connects to Intel 8080 parallel bus. Its connector is compatible with the ALIENTEK STM32 development board. It can be used with the drm/mipi-dbi bus driver if the bus is emulated with GPIO. [1] http://www.lcdwiki.com/2.8inch_16BIT_Module_ILI9341_SKU:MRB2801 Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com> --- drivers/gpu/drm/tiny/Kconfig | 13 ++ drivers/gpu/drm/tiny/Makefile | 1 + drivers/gpu/drm/tiny/ili9341_gpio.c | 290 ++++++++++++++++++++++++++++++++++++ 3 files changed, 304 insertions(+) create mode 100644 drivers/gpu/drm/tiny/ili9341_gpio.c diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig index 2b6414f..e48e268 100644 --- a/drivers/gpu/drm/tiny/Kconfig +++ b/drivers/gpu/drm/tiny/Kconfig @@ -66,6 +66,19 @@ config TINYDRM_ILI9341 If M is selected the module will be called ili9341. +config TINYDRM_ILI9341_GPIO + tristate "DRM support for ILI9341 display panels with parallel bus interface over GPIO" + depends on DRM + select DRM_KMS_HELPER + select DRM_KMS_CMA_HELPER + select DRM_MIPI_DBI + select BACKLIGHT_CLASS_DEVICE + help + DRM driver for the following Ilitek ILI9341 panels: + * MRB2801 2.8" 240x320 TFT + + If M is selected the module will be called ili9341_gpio. + config TINYDRM_ILI9486 tristate "DRM support for ILI9486 display panels" depends on DRM && SPI diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile index 6ae4e9e5..1ad2c0d 100644 --- a/drivers/gpu/drm/tiny/Makefile +++ b/drivers/gpu/drm/tiny/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_GM12U320) += gm12u320.o obj-$(CONFIG_TINYDRM_HX8357D) += hx8357d.o obj-$(CONFIG_TINYDRM_ILI9225) += ili9225.o obj-$(CONFIG_TINYDRM_ILI9341) += ili9341.o +obj-$(CONFIG_TINYDRM_ILI9341_GPIO) += ili9341_gpio.o obj-$(CONFIG_TINYDRM_ILI9486) += ili9486.o obj-$(CONFIG_TINYDRM_MI0283QT) += mi0283qt.o obj-$(CONFIG_TINYDRM_REPAPER) += repaper.o diff --git a/drivers/gpu/drm/tiny/ili9341_gpio.c b/drivers/gpu/drm/tiny/ili9341_gpio.c new file mode 100644 index 0000000..de8a63b8 --- /dev/null +++ b/drivers/gpu/drm/tiny/ili9341_gpio.c @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * DRM driver for Ilitek ILI9341 panels with parallel bus interface + * + * Copyright 2020 Mikhail Durnev <mikhail_durnev@mentor.com> + * + * Based on ili9341.c: + * Copyright 2018 David Lechner <david@lechnology.com> + * + * Based on mi0283qt.c: + * Copyright 2016 Noralf Trønnes + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_fb_helper.h> +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_mipi_dbi.h> +#include <drm/drm_modeset_helper.h> +#include <video/mipi_display.h> + +#define ILI9341_FRMCTR1 0xb1 +#define ILI9341_DISCTRL 0xb6 +#define ILI9341_ETMOD 0xb7 + +#define ILI9341_PWCTRL1 0xc0 +#define ILI9341_PWCTRL2 0xc1 +#define ILI9341_VMCTRL1 0xc5 +#define ILI9341_VMCTRL2 0xc7 +#define ILI9341_PWCTRLA 0xcb +#define ILI9341_PWCTRLB 0xcf + +#define ILI9341_PGAMCTRL 0xe0 +#define ILI9341_NGAMCTRL 0xe1 +#define ILI9341_DTCTRLA 0xe8 +#define ILI9341_DTCTRLB 0xea +#define ILI9341_PWRSEQ 0xed + +#define ILI9341_EN3GAM 0xf2 +#define ILI9341_PUMPCTRL 0xf7 + +#define ILI9341_MADCTL_BGR BIT(3) +#define ILI9341_MADCTL_MV BIT(5) +#define ILI9341_MADCTL_MX BIT(6) +#define ILI9341_MADCTL_MY BIT(7) + +static void yx240qv29_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *crtc_state, + struct drm_plane_state *plane_state) +{ + struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); + struct mipi_dbi *dbi = &dbidev->dbi; + u8 addr_mode; + int ret, idx; + + if (!drm_dev_enter(pipe->crtc.dev, &idx)) + return; + + DRM_DEBUG_KMS("\n"); + + ret = mipi_dbi_poweron_conditional_reset(dbidev); + if (ret < 0) + goto out_exit; + if (ret == 1) + goto out_enable; + + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF); + + mipi_dbi_command(dbi, ILI9341_PWCTRLB, 0x00, 0xc1, 0x30); + mipi_dbi_command(dbi, ILI9341_PWRSEQ, 0x64, 0x03, 0x12, 0x81); + mipi_dbi_command(dbi, ILI9341_DTCTRLA, 0x85, 0x00, 0x78); + mipi_dbi_command(dbi, ILI9341_PWCTRLA, 0x39, 0x2c, 0x00, 0x34, 0x02); + mipi_dbi_command(dbi, ILI9341_PUMPCTRL, 0x20); + mipi_dbi_command(dbi, ILI9341_DTCTRLB, 0x00, 0x00); + + /* Power Control */ + mipi_dbi_command(dbi, ILI9341_PWCTRL1, 0x23); + mipi_dbi_command(dbi, ILI9341_PWCTRL2, 0x10); + /* VCOM */ + mipi_dbi_command(dbi, ILI9341_VMCTRL1, 0x3e, 0x28); + mipi_dbi_command(dbi, ILI9341_VMCTRL2, 0x86); + + /* Memory Access Control */ + mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); + + /* Frame Rate */ + mipi_dbi_command(dbi, ILI9341_FRMCTR1, 0x00, 0x1b); + + /* Gamma */ + mipi_dbi_command(dbi, ILI9341_EN3GAM, 0x00); + mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, 0x01); + mipi_dbi_command(dbi, ILI9341_PGAMCTRL, + 0x0f, 0x31, 0x2b, 0x0c, 0x0e, 0x08, 0x4e, 0xf1, + 0x37, 0x07, 0x10, 0x03, 0x0e, 0x09, 0x00); + mipi_dbi_command(dbi, ILI9341_NGAMCTRL, + 0x00, 0x0e, 0x14, 0x03, 0x11, 0x07, 0x31, 0xc1, + 0x48, 0x08, 0x0f, 0x0c, 0x31, 0x36, 0x0f); + + /* DDRAM */ + mipi_dbi_command(dbi, ILI9341_ETMOD, 0x07); + + /* Display */ + mipi_dbi_command(dbi, ILI9341_DISCTRL, 0x08, 0x82, 0x27, 0x00); + mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); + msleep(100); + + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); + msleep(100); + +out_enable: + switch (dbidev->rotation) { + default: + addr_mode = ILI9341_MADCTL_MX; + break; + case 90: + addr_mode = ILI9341_MADCTL_MV; + break; + case 180: + addr_mode = ILI9341_MADCTL_MY; + break; + case 270: + addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | + ILI9341_MADCTL_MX; + break; + } + addr_mode |= ILI9341_MADCTL_BGR; + mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); + mipi_dbi_enable_flush(dbidev, crtc_state, plane_state); +out_exit: + drm_dev_exit(idx); +} + +static const struct drm_simple_display_pipe_funcs ili9341gpio_pipe_funcs = { + .enable = yx240qv29_enable, + .disable = mipi_dbi_pipe_disable, + .update = mipi_dbi_pipe_update, + .prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb, +}; + +static const struct drm_display_mode yx240qv29_mode = { + DRM_SIMPLE_MODE(240, 320, 37, 49), +}; + +DEFINE_DRM_GEM_CMA_FOPS(ili9341gpio_fops); + +static struct drm_driver ili9341gpio_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &ili9341gpio_fops, + .release = mipi_dbi_release, + DRM_GEM_CMA_VMAP_DRIVER_OPS, + .debugfs_init = mipi_dbi_debugfs_init, + .name = "ili9341gpio", + .desc = "Ilitek ILI9341", + .date = "20201114", + .major = 1, + .minor = 0, +}; + +static const struct of_device_id ili9341gpio_of_match[] = { + { .compatible = "ronbo,mrb2801" }, + { } +}; +MODULE_DEVICE_TABLE(of, ili9341gpio_of_match); + +static int ili9341gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mipi_dbi_dev *dbidev; + struct drm_device *drm; + struct mipi_dbi *dbi; + struct gpio_desc *dc; + struct gpio_desc *wr; + struct gpio_descs *db; + u32 rotation = 0; + u32 wr_delays[2] = {15, 60}; + int ret; + + dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL); + if (!dbidev) + return -ENOMEM; + + dbi = &dbidev->dbi; + drm = &dbidev->drm; + ret = devm_drm_dev_init(dev, drm, &ili9341gpio_driver); + if (ret) { + kfree(dbidev); + return ret; + } + + drm_mode_config_init(drm); + + dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(dbi->reset)) { + DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n"); + return PTR_ERR(dbi->reset); + } + + dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_HIGH); + if (IS_ERR(dc)) { + DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n"); + return PTR_ERR(dc); + } + + wr = devm_gpiod_get(dev, "wr", GPIOD_OUT_HIGH); + if (IS_ERR(wr)) { + DRM_DEV_ERROR(dev, "Failed to get gpio 'wr'\n"); + return PTR_ERR(wr); + } + + db = devm_gpiod_get_array(dev, "db", GPIOD_OUT_LOW); + if (IS_ERR(db)) { + DRM_DEV_ERROR(dev, "Failed to get gpio 'db'\n"); + return PTR_ERR(db); + } + if (db->ndescs != 16 && db->ndescs != 8) { + /* + * The data bus can be either 8 or 16 bits wide. + * ILI9341 can work with 6, 8, 9, 16, and 18-bit parallel interfaces, + * but the MRB2801 board supports only 8 or 16-bit interfaces. + */ + DRM_DEV_ERROR(dev, "Wrong number of bits in gpio 'db': %u\n", db->ndescs); + return PTR_ERR(db); + } + + dbidev->backlight = devm_of_find_backlight(dev); + if (IS_ERR(dbidev->backlight)) + return PTR_ERR(dbidev->backlight); + + device_property_read_u32(dev, "rotation", &rotation); + + device_property_read_u32_array(dev, "wr-up-down-delays", wr_delays, 2); + + ret = mipi_dbi_gpio_init(dbi, dc, wr, db, wr_delays[0], wr_delays[1]); + if (ret) + return ret; + + ret = mipi_dbi_dev_init(dbidev, &ili9341gpio_pipe_funcs, &yx240qv29_mode, rotation); + if (ret) + return ret; + + drm_mode_config_reset(drm); + + ret = drm_dev_register(drm, 0); + if (ret) + return ret; + + platform_set_drvdata(pdev, drm); + + drm_fbdev_generic_setup(drm, 0); + + return 0; +} + +static int ili9341gpio_remove(struct platform_device *pdev) +{ + struct drm_device *drm = platform_get_drvdata(pdev); + + drm_dev_unplug(drm); + drm_atomic_helper_shutdown(drm); + + return 0; +} + +static void ili9341gpio_shutdown(struct platform_device *pdev) +{ + drm_atomic_helper_shutdown(platform_get_drvdata(pdev)); +} + +static struct platform_driver ili9341gpio_platform_driver = { + .driver = { + .name = "ili9341gpio", + .of_match_table = ili9341gpio_of_match, + }, + .probe = ili9341gpio_probe, + .remove = ili9341gpio_remove, + .shutdown = ili9341gpio_shutdown, +}; +module_platform_driver(ili9341gpio_platform_driver); + +MODULE_DESCRIPTION("Ilitek ILI9341 8/16-bit DRM driver"); +MODULE_AUTHOR("Mikhail Durnev <mikhail_durnev@mentor.com>"); +MODULE_LICENSE("GPL"); -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-11-30 23:07 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-30 23:05 [PATCH v2 0/3] drm/mipi-dbi: Type B bus support, drm/tiny: MRB2801 mdurnev 2020-11-30 23:05 ` mdurnev 2020-11-30 23:05 ` [PATCH v2 1/3] drm/mipi-dbi: Add support for Type B mdurnev 2020-11-30 23:05 ` mdurnev 2020-11-30 23:05 ` mdurnev [this message] 2020-11-30 23:05 ` [PATCH v2 2/3] drm/tiny: Add driver for ili9341 with parallel bus mdurnev 2020-12-02 16:14 ` kernel test robot 2020-12-02 16:14 ` kernel test robot 2020-12-02 16:14 ` kernel test robot 2020-11-30 23:05 ` [PATCH v2 3/3] dt-bindings: panel: Add bindings for MRB2801 mdurnev 2020-11-30 23:05 ` mdurnev
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1606777536-14783-3-git-send-email-mikhail_durnev@mentor.com \ --to=mdurnev@gmail.com \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mikhail_durnev@mentor.com \ --cc=noralf@tronnes.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.