[PATCH v4 05/10] acpi: set fadt.smi_cmd to zero when SMM is not supported

[isaku.yamahata@gmail.com]

From: Isaku Yamahata <isaku.yamahata@intel.com>

From table 5.9 SMI_CMD of ACPI spec
> This field is reserved and must be zero on system
> that does not support System Management mode.

When smm is not enabled, set it to zero to comform to the spec.
When -machine smm=off is passed, the change to FACP is as follows.

@@ -1,46 +1,46 @@
 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20180105 (64-bit version)
  * Copyright (c) 2000 - 2018 Intel Corporation
  *
- * Disassembly of tests/data/acpi/q35/FACP, Fri Feb  5 16:57:04 2021
+ * Disassembly of /tmp/aml-1OQYX0, Fri Feb  5 16:57:04 2021
  *
  * ACPI Data Table [FACP]
  *
  * Format: [HexOffset DecimalOffset ByteLength]  FieldName : FieldValue
  */

 [000h 0000   4]                    Signature : "FACP"    [Fixed ACPI Description Table (FADT)]
 [004h 0004   4]                 Table Length : 000000F4
 [008h 0008   1]                     Revision : 03
-[009h 0009   1]                     Checksum : 1F
+[009h 0009   1]                     Checksum : D6
 [00Ah 0010   6]                       Oem ID : "BOCHS "
 [010h 0016   8]                 Oem Table ID : "BXPCFACP"
 [018h 0024   4]                 Oem Revision : 00000001
 [01Ch 0028   4]              Asl Compiler ID : "BXPC"
 [020h 0032   4]        Asl Compiler Revision : 00000001

 [024h 0036   4]                 FACS Address : 00000000
 [028h 0040   4]                 DSDT Address : 00000000
 [02Ch 0044   1]                        Model : 01
 [02Dh 0045   1]                   PM Profile : 00 [Unspecified]
 [02Eh 0046   2]                SCI Interrupt : 0009
-[030h 0048   4]             SMI Command Port : 000000B2
-[034h 0052   1]            ACPI Enable Value : 02
-[035h 0053   1]           ACPI Disable Value : 03
+[030h 0048   4]             SMI Command Port : 00000000
+[034h 0052   1]            ACPI Enable Value : 00
+[035h 0053   1]           ACPI Disable Value : 00
 [036h 0054   1]               S4BIOS Command : 00
 [037h 0055   1]              P-State Control : 00
 [038h 0056   4]     PM1A Event Block Address : 00000600
 [03Ch 0060   4]     PM1B Event Block Address : 00000000
 [040h 0064   4]   PM1A Control Block Address : 00000604
 [044h 0068   4]   PM1B Control Block Address : 00000000
 [048h 0072   4]    PM2 Control Block Address : 00000000
 [04Ch 0076   4]       PM Timer Block Address : 00000608
 [050h 0080   4]           GPE0 Block Address : 00000620
 [054h 0084   4]           GPE1 Block Address : 00000000
 [058h 0088   1]       PM1 Event Block Length : 04
 [059h 0089   1]     PM1 Control Block Length : 02
 [05Ah 0090   1]     PM2 Control Block Length : 00
 [05Bh 0091   1]        PM Timer Block Length : 04
 [05Ch 0092   1]            GPE0 Block Length : 10
 [05Dh 0093   1]            GPE1 Block Length : 00

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
---
 hw/i386/acpi-build.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index f56d699c7f..e3386ae674 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -139,6 +139,14 @@ const struct AcpiGenericAddress x86_nvdimm_acpi_dsmio = {
 static void init_common_fadt_data(MachineState *ms, Object *o,
                                   AcpiFadtData *data)
 {
+    X86MachineState *x86ms = X86_MACHINE(ms);
+    /*
+     * "ICH9-LPC" or "PIIX4_PM" has "smm-compat" property to keep the old
+     * behavior for compatibility irrelevant to smm_enabled, which doesn't
+     * comforms to ACPI spec.
+     */
+    bool smm_enabled = object_property_get_bool(o, "smm-compat", NULL) ?
+        true : x86_machine_is_smm_enabled(x86ms);
     uint32_t io = object_property_get_uint(o, ACPI_PM_PROP_PM_IO_BASE, NULL);
     AmlAddressSpace as = AML_AS_SYSTEM_IO;
     AcpiFadtData fadt = {
@@ -159,12 +167,16 @@ static void init_common_fadt_data(MachineState *ms, Object *o,
         .rtc_century = RTC_CENTURY,
         .plvl2_lat = 0xfff /* C2 state not supported */,
         .plvl3_lat = 0xfff /* C3 state not supported */,
-        .smi_cmd = ACPI_PORT_SMI_CMD,
+        .smi_cmd = smm_enabled ? ACPI_PORT_SMI_CMD : 0,
         .sci_int = object_property_get_uint(o, ACPI_PM_PROP_SCI_INT, NULL),
         .acpi_enable_cmd =
-            object_property_get_uint(o, ACPI_PM_PROP_ACPI_ENABLE_CMD, NULL),
+            smm_enabled ?
+            object_property_get_uint(o, ACPI_PM_PROP_ACPI_ENABLE_CMD, NULL) :
+            0,
         .acpi_disable_cmd =
-            object_property_get_uint(o, ACPI_PM_PROP_ACPI_DISABLE_CMD, NULL),
+            smm_enabled ?
+            object_property_get_uint(o, ACPI_PM_PROP_ACPI_DISABLE_CMD, NULL) :
+            0,
         .pm1a_evt = { .space_id = as, .bit_width = 4 * 8, .address = io },
         .pm1a_cnt = { .space_id = as, .bit_width = 2 * 8,
                       .address = io + 0x04 },
-- 
2.17.1