All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chuck Lever <chuck.lever@oracle.com>
To: anna.schumaker@netapp.com
Cc: linux-nfs@vger.kernel.org, linux-rdma@vger.kernel.org
Subject: [PATCH v4 3/6] xprtrdma: Refactor invocations of offset_in_page()
Date: Thu, 04 Feb 2021 11:59:13 -0500	[thread overview]
Message-ID: <161245795344.737759.15541317673340788640.stgit@manet.1015granger.net> (raw)
In-Reply-To: <161245786674.737759.8361822825753388908.stgit@manet.1015granger.net>

Clean up so that offset_in_page() is invoked less often in the
most common case, which is mapping xdr->pages.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
---
 net/sunrpc/xprtrdma/frwr_ops.c  |    8 +++-----
 net/sunrpc/xprtrdma/rpc_rdma.c  |    4 ++--
 net/sunrpc/xprtrdma/xprt_rdma.h |    2 +-
 3 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/net/sunrpc/xprtrdma/frwr_ops.c b/net/sunrpc/xprtrdma/frwr_ops.c
index 13a50f77dddb..766a1048a48a 100644
--- a/net/sunrpc/xprtrdma/frwr_ops.c
+++ b/net/sunrpc/xprtrdma/frwr_ops.c
@@ -306,16 +306,14 @@ struct rpcrdma_mr_seg *frwr_map(struct rpcrdma_xprt *r_xprt,
 	if (nsegs > ep->re_max_fr_depth)
 		nsegs = ep->re_max_fr_depth;
 	for (i = 0; i < nsegs;) {
-		sg_set_page(&mr->mr_sg[i],
-			    seg->mr_page,
-			    seg->mr_len,
-			    offset_in_page(seg->mr_offset));
+		sg_set_page(&mr->mr_sg[i], seg->mr_page,
+			    seg->mr_len, seg->mr_offset);
 
 		++seg;
 		++i;
 		if (ep->re_mrtype == IB_MR_TYPE_SG_GAPS)
 			continue;
-		if ((i < nsegs && offset_in_page(seg->mr_offset)) ||
+		if ((i < nsegs && seg->mr_offset) ||
 		    offset_in_page((seg-1)->mr_offset + (seg-1)->mr_len))
 			break;
 	}
diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index b36b9aae0588..b2482d9328d1 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -214,7 +214,7 @@ rpcrdma_convert_kvec(struct kvec *vec, struct rpcrdma_mr_seg *seg,
 		     unsigned int *n)
 {
 	seg->mr_page = virt_to_page(vec->iov_base);
-	seg->mr_offset = vec->iov_base;
+	seg->mr_offset = offset_in_page(vec->iov_base);
 	seg->mr_len = vec->iov_len;
 	++seg;
 	++(*n);
@@ -246,7 +246,7 @@ rpcrdma_convert_iovs(struct rpcrdma_xprt *r_xprt, struct xdr_buf *xdrbuf,
 	page_base = offset_in_page(xdrbuf->page_base);
 	while (len) {
 		seg->mr_page = *ppages;
-		seg->mr_offset = (char *)page_base;
+		seg->mr_offset = page_base;
 		seg->mr_len = min_t(u32, PAGE_SIZE - page_base, len);
 		len -= seg->mr_len;
 		++ppages;
diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h
index 02971e183989..ed1c5444fb9d 100644
--- a/net/sunrpc/xprtrdma/xprt_rdma.h
+++ b/net/sunrpc/xprtrdma/xprt_rdma.h
@@ -287,7 +287,7 @@ enum {
 struct rpcrdma_mr_seg {
 	u32		mr_len;		/* length of segment */
 	struct page	*mr_page;	/* underlying struct page */
-	char		*mr_offset;	/* IN: page offset, OUT: iova */
+	u64		mr_offset;	/* IN: page offset, OUT: iova */
 };
 
 /* The Send SGE array is provisioned to send a maximum size



  parent reply	other threads:[~2021-02-04 17:01 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-04 16:58 [PATCH v4 0/6] RPC/RDMA client fixes Chuck Lever
2021-02-04 16:59 ` [PATCH v4 1/6] xprtrdma: Remove FMR support in rpcrdma_convert_iovs() Chuck Lever
2021-02-04 16:59 ` [PATCH v4 2/6] xprtrdma: Simplify rpcrdma_convert_kvec() and frwr_map() Chuck Lever
2021-02-04 16:59 ` Chuck Lever [this message]
2021-02-04 16:59 ` [PATCH v4 4/6] rpcrdma: Fix comments about reverse-direction operation Chuck Lever
2021-02-04 16:59 ` [PATCH v4 5/6] xprtrdma: Pad optimization, revisited Chuck Lever
2021-02-04 16:59 ` [PATCH v4 6/6] rpcrdma: Capture bytes received in Receive completion tracepoints Chuck Lever
2021-02-04 19:48 ` [PATCH v4 0/6] RPC/RDMA client fixes Anna Schumaker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=161245795344.737759.15541317673340788640.stgit@manet.1015granger.net \
    --to=chuck.lever@oracle.com \
    --cc=anna.schumaker@netapp.com \
    --cc=linux-nfs@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.