From: Alain Volmat <alain.volmat@foss.st.com>
To: <broonie@kernel.org>, <amelie.delaunay@foss.st.com>
Cc: <mcoquelin.stm32@gmail.com>, <alexandre.torgue@foss.st.com>,
<linux-spi@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <fabrice.gasnier@foss.st.com>,
<alain.volmat@foss.st.com>
Subject: [PATCH v2 0/8] spi: stm32: fix and enhancements for spi-stm32
Date: Fri, 5 Feb 2021 19:59:24 +0100 [thread overview]
Message-ID: <1612551572-495-1-git-send-email-alain.volmat@foss.st.com> (raw)
The serie provides a fix for the spi-stm32 driver, allowing to properly
handle 0 byte transfer (and thus being able to run spi-loopback-test).
In addition to that, important enhancements are implemented, among them,
supporting transfer larger that what the IP can setup in one go or
allowing to use the SPI bus without cs_gpio.
v2: Fix within patch 'spi: stm32: properly handle 0 byte transfer'
Reorder patches to avoid compilation issue
Alain Volmat (5):
spi: stm32: properly handle 0 byte transfer
spi: stm32: do not mandate cs_gpio
spi: stm32h7: ensure message are smaller than max size
spi: stm32: defer probe for reset
spi: stm32: make spurious and overrun interrupts visible
Amelie Delaunay (2):
spi: stm32: use bitfield macros
spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC
Etienne Carriere (1):
spi: stm32: driver uses reset controller only at init
drivers/spi/spi-stm32.c | 114 ++++++++++++++++++----------------------
1 file changed, 52 insertions(+), 62 deletions(-)
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Alain Volmat <alain.volmat@foss.st.com>
To: <broonie@kernel.org>, <amelie.delaunay@foss.st.com>
Cc: linux-kernel@vger.kernel.org, alexandre.torgue@foss.st.com,
fabrice.gasnier@foss.st.com, mcoquelin.stm32@gmail.com,
alain.volmat@foss.st.com, linux-spi@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/8] spi: stm32: fix and enhancements for spi-stm32
Date: Fri, 5 Feb 2021 19:59:24 +0100 [thread overview]
Message-ID: <1612551572-495-1-git-send-email-alain.volmat@foss.st.com> (raw)
The serie provides a fix for the spi-stm32 driver, allowing to properly
handle 0 byte transfer (and thus being able to run spi-loopback-test).
In addition to that, important enhancements are implemented, among them,
supporting transfer larger that what the IP can setup in one go or
allowing to use the SPI bus without cs_gpio.
v2: Fix within patch 'spi: stm32: properly handle 0 byte transfer'
Reorder patches to avoid compilation issue
Alain Volmat (5):
spi: stm32: properly handle 0 byte transfer
spi: stm32: do not mandate cs_gpio
spi: stm32h7: ensure message are smaller than max size
spi: stm32: defer probe for reset
spi: stm32: make spurious and overrun interrupts visible
Amelie Delaunay (2):
spi: stm32: use bitfield macros
spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC
Etienne Carriere (1):
spi: stm32: driver uses reset controller only at init
drivers/spi/spi-stm32.c | 114 ++++++++++++++++++----------------------
1 file changed, 52 insertions(+), 62 deletions(-)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-02-05 19:07 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-05 18:59 Alain Volmat [this message]
2021-02-05 18:59 ` [PATCH v2 0/8] spi: stm32: fix and enhancements for spi-stm32 Alain Volmat
2021-02-05 18:59 ` [PATCH v2 1/8] spi: stm32: properly handle 0 byte transfer Alain Volmat
2021-02-05 18:59 ` Alain Volmat
2021-02-05 18:59 ` [PATCH v2 2/8] spi: stm32: do not mandate cs_gpio Alain Volmat
2021-02-05 18:59 ` Alain Volmat
2021-02-05 18:59 ` [PATCH v2 3/8] spi: stm32: use bitfield macros Alain Volmat
2021-02-05 18:59 ` Alain Volmat
2021-02-05 18:59 ` [PATCH v2 4/8] spi: stm32h7: ensure message are smaller than max size Alain Volmat
2021-02-05 18:59 ` Alain Volmat
2021-02-05 18:59 ` [PATCH v2 5/8] spi: stm32: driver uses reset controller only at init Alain Volmat
2021-02-05 18:59 ` Alain Volmat
2021-02-05 18:59 ` [PATCH v2 6/8] spi: stm32: defer probe for reset Alain Volmat
2021-02-05 18:59 ` Alain Volmat
2021-02-05 18:59 ` [PATCH v2 7/8] spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC Alain Volmat
2021-02-05 18:59 ` Alain Volmat
2021-02-05 18:59 ` [PATCH v2 8/8] spi: stm32: make spurious and overrun interrupts visible Alain Volmat
2021-02-05 18:59 ` Alain Volmat
2021-02-05 20:16 ` [PATCH v2 0/8] spi: stm32: fix and enhancements for spi-stm32 Mark Brown
2021-02-05 20:16 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1612551572-495-1-git-send-email-alain.volmat@foss.st.com \
--to=alain.volmat@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=amelie.delaunay@foss.st.com \
--cc=broonie@kernel.org \
--cc=fabrice.gasnier@foss.st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.