All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anilkumar Kolli <akolli@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Anilkumar Kolli <akolli@codeaurora.org>
Subject: [PATCH 03/11] ath11k: qmi: increase the number of fw segments
Date: Wed, 10 Feb 2021 14:12:02 +0530	[thread overview]
Message-ID: <1612946530-28504-4-git-send-email-akolli@codeaurora.org> (raw)
In-Reply-To: <1612946530-28504-1-git-send-email-akolli@codeaurora.org>

QCN9074 firmware uses 20MB of HOST DDR memory, fw requests
the memory in segmnets of size 1MB/512KB/256KB.
Increase the number of fw memory segments to 52.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/qmi.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index 7bad374cc23a..1797c3b59f48 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -23,7 +23,7 @@
 #define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_IPQ8074	0x02
 #define ATH11K_QMI_WLANFW_MAX_TIMESTAMP_LEN_V01	32
 #define ATH11K_QMI_RESP_LEN_MAX			8192
-#define ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01	32
+#define ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01	52
 #define ATH11K_QMI_CALDB_SIZE			0x480000
 #define ATH11K_QMI_BDF_EXT_STR_LENGTH		0x20
 
@@ -216,8 +216,8 @@ struct qmi_wlanfw_ind_register_resp_msg_v01 {
 	u64 fw_status;
 };
 
-#define QMI_WLANFW_REQUEST_MEM_IND_MSG_V01_MAX_LEN	1124
-#define QMI_WLANFW_RESPOND_MEM_REQ_MSG_V01_MAX_LEN	548
+#define QMI_WLANFW_REQUEST_MEM_IND_MSG_V01_MAX_LEN	1824
+#define QMI_WLANFW_RESPOND_MEM_REQ_MSG_V01_MAX_LEN	888
 #define QMI_WLANFW_RESPOND_MEM_RESP_MSG_V01_MAX_LEN	7
 #define QMI_WLANFW_REQUEST_MEM_IND_V01			0x0035
 #define QMI_WLANFW_RESPOND_MEM_REQ_V01			0x0036
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Anilkumar Kolli <akolli@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: Anilkumar Kolli <akolli@codeaurora.org>, linux-wireless@vger.kernel.org
Subject: [PATCH 03/11] ath11k: qmi: increase the number of fw segments
Date: Wed, 10 Feb 2021 14:12:02 +0530	[thread overview]
Message-ID: <1612946530-28504-4-git-send-email-akolli@codeaurora.org> (raw)
In-Reply-To: <1612946530-28504-1-git-send-email-akolli@codeaurora.org>

QCN9074 firmware uses 20MB of HOST DDR memory, fw requests
the memory in segmnets of size 1MB/512KB/256KB.
Increase the number of fw memory segments to 52.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/qmi.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index 7bad374cc23a..1797c3b59f48 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -23,7 +23,7 @@
 #define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_IPQ8074	0x02
 #define ATH11K_QMI_WLANFW_MAX_TIMESTAMP_LEN_V01	32
 #define ATH11K_QMI_RESP_LEN_MAX			8192
-#define ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01	32
+#define ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01	52
 #define ATH11K_QMI_CALDB_SIZE			0x480000
 #define ATH11K_QMI_BDF_EXT_STR_LENGTH		0x20
 
@@ -216,8 +216,8 @@ struct qmi_wlanfw_ind_register_resp_msg_v01 {
 	u64 fw_status;
 };
 
-#define QMI_WLANFW_REQUEST_MEM_IND_MSG_V01_MAX_LEN	1124
-#define QMI_WLANFW_RESPOND_MEM_REQ_MSG_V01_MAX_LEN	548
+#define QMI_WLANFW_REQUEST_MEM_IND_MSG_V01_MAX_LEN	1824
+#define QMI_WLANFW_RESPOND_MEM_REQ_MSG_V01_MAX_LEN	888
 #define QMI_WLANFW_RESPOND_MEM_RESP_MSG_V01_MAX_LEN	7
 #define QMI_WLANFW_REQUEST_MEM_IND_V01			0x0035
 #define QMI_WLANFW_RESPOND_MEM_REQ_V01			0x0036
-- 
2.7.4


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

  parent reply	other threads:[~2021-02-10  8:49 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-10  8:41 [PATCH 00/11] ath11k: Add support for QCN9074 Anilkumar Kolli
2021-02-10  8:41 ` Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 01/11] ath11k: Refactor ath11k_msi_config Anilkumar Kolli
2021-02-10  8:42   ` Anilkumar Kolli
2021-02-17  9:38   ` Kalle Valo
2021-02-17  9:38   ` Kalle Valo
2021-02-10  8:42 ` [PATCH 02/11] ath11k: Move qmi service_ins_id to hw_params Anilkumar Kolli
2021-02-10  8:42   ` Anilkumar Kolli
2021-02-10  8:42 ` Anilkumar Kolli [this message]
2021-02-10  8:42   ` [PATCH 03/11] ath11k: qmi: increase the number of fw segments Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 04/11] ath11k: Update memory segment count for qcn9074 Anilkumar Kolli
2021-02-10  8:42   ` Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 05/11] ath11k: Add qcn9074 mhi controller config Anilkumar Kolli
2021-02-10  8:42   ` Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 06/11] ath11k: add static window support for register access Anilkumar Kolli
2021-02-10  8:42   ` Anilkumar Kolli
2021-02-16 16:45   ` Kalle Valo
2021-02-16 16:45     ` Kalle Valo
2021-02-17  2:28     ` akolli
2021-02-17  2:28       ` akolli
2021-02-17  9:28       ` Kalle Valo
2021-02-17  9:28         ` Kalle Valo
2022-03-28 16:44   ` Hamdi Issam
2022-03-28 16:44     ` Hamdi Issam
2022-06-23 10:44     ` Karthikeyan Periyasamy (QUIC)
2022-06-23 10:44       ` Karthikeyan Periyasamy (QUIC)
2021-02-10  8:42 ` [PATCH 07/11] ath11k: add hal support for QCN9074 Anilkumar Kolli
2021-02-10  8:42   ` Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 08/11] ath11k: add data path " Anilkumar Kolli
2021-02-10  8:42   ` Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 09/11] ath11k: add CE interrupt " Anilkumar Kolli
2021-02-10  8:42   ` Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 10/11] ath11k: add extended " Anilkumar Kolli
2021-02-10  8:42   ` Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 11/11] ath11k: add qcn9074 pci device support Anilkumar Kolli
2021-02-10  8:42   ` Anilkumar Kolli
2021-02-16 16:36   ` Kalle Valo
2021-02-16 16:36     ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1612946530-28504-4-git-send-email-akolli@codeaurora.org \
    --to=akolli@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.