From: Xu Yilun <yilun.xu@intel.com>
To: gregkh@linuxfoundation.org, mdf@kernel.org,
linux-fpga@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: trix@redhat.com, lgoncalv@redhat.com, yilun.xu@intel.com,
hao.wu@intel.com
Subject: [RESEND PATCH v11 1/2] uio: uio_dfl: add userspace i/o driver for DFL bus
Date: Sat, 27 Feb 2021 23:27:03 +0800 [thread overview]
Message-ID: <1614439624-3946-2-git-send-email-yilun.xu@intel.com> (raw)
In-Reply-To: <1614439624-3946-1-git-send-email-yilun.xu@intel.com>
This patch supports the DFL drivers be written in userspace. This is
realized by exposing the userspace I/O device interfaces.
The driver now only binds the ether group feature, which has no irq. So
the irq support is not implemented yet.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
---
v9: switch to add a uio driver in drivers/uio
v10: add the source file in MAINTAINERS
more descriptive Kconfig header
add detailed path for opae uio example
v11: no change
---
MAINTAINERS | 1 +
drivers/uio/Kconfig | 17 +++++++++++++
drivers/uio/Makefile | 1 +
drivers/uio/uio_dfl.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 85 insertions(+)
create mode 100644 drivers/uio/uio_dfl.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 000fe0b..4dc0354 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6943,6 +6943,7 @@ S: Maintained
F: Documentation/ABI/testing/sysfs-bus-dfl*
F: Documentation/fpga/dfl.rst
F: drivers/fpga/dfl*
+F: drivers/uio/uio_dfl.c
F: include/linux/dfl.h
F: include/uapi/linux/fpga-dfl.h
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 202ee81..5531f3a 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -165,4 +165,21 @@ config UIO_HV_GENERIC
to network and storage devices from userspace.
If you compile this as a module, it will be called uio_hv_generic.
+
+config UIO_DFL
+ tristate "Generic driver for DFL (Device Feature List) bus"
+ depends on FPGA_DFL
+ help
+ Generic DFL (Device Feature List) driver for Userspace I/O devices.
+ It is useful to provide direct access to DFL devices from userspace.
+ A sample userspace application using this driver is available for
+ download in a git repository:
+
+ git clone https://github.com/OPAE/opae-sdk.git
+
+ It could be found at:
+
+ opae-sdk/tools/libopaeuio/
+
+ If you compile this as a module, it will be called uio_dfl.
endif
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index c285dd2..f2f416a1 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_UIO_PRUSS) += uio_pruss.o
obj-$(CONFIG_UIO_MF624) += uio_mf624.o
obj-$(CONFIG_UIO_FSL_ELBC_GPCM) += uio_fsl_elbc_gpcm.o
obj-$(CONFIG_UIO_HV_GENERIC) += uio_hv_generic.o
+obj-$(CONFIG_UIO_DFL) += uio_dfl.o
diff --git a/drivers/uio/uio_dfl.c b/drivers/uio/uio_dfl.c
new file mode 100644
index 0000000..89c0fc7
--- /dev/null
+++ b/drivers/uio/uio_dfl.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic DFL driver for Userspace I/O devicess
+ *
+ * Copyright (C) 2021 Intel Corporation, Inc.
+ */
+#include <linux/dfl.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/uio_driver.h>
+
+#define DRIVER_NAME "uio_dfl"
+
+static int uio_dfl_probe(struct dfl_device *ddev)
+{
+ struct resource *r = &ddev->mmio_res;
+ struct device *dev = &ddev->dev;
+ struct uio_info *uioinfo;
+ struct uio_mem *uiomem;
+ int ret;
+
+ uioinfo = devm_kzalloc(dev, sizeof(struct uio_info), GFP_KERNEL);
+ if (!uioinfo)
+ return -ENOMEM;
+
+ uioinfo->name = DRIVER_NAME;
+ uioinfo->version = "0";
+
+ uiomem = &uioinfo->mem[0];
+ uiomem->memtype = UIO_MEM_PHYS;
+ uiomem->addr = r->start & PAGE_MASK;
+ uiomem->offs = r->start & ~PAGE_MASK;
+ uiomem->size = (uiomem->offs + resource_size(r)
+ + PAGE_SIZE - 1) & PAGE_MASK;
+ uiomem->name = r->name;
+
+ /* Irq is yet to be supported */
+ uioinfo->irq = UIO_IRQ_NONE;
+
+ ret = devm_uio_register_device(dev, uioinfo);
+ if (ret)
+ dev_err(dev, "unable to register uio device\n");
+
+ return ret;
+}
+
+#define FME_FEATURE_ID_ETH_GROUP 0x10
+
+static const struct dfl_device_id uio_dfl_ids[] = {
+ { FME_ID, FME_FEATURE_ID_ETH_GROUP },
+ { }
+};
+MODULE_DEVICE_TABLE(dfl, uio_dfl_ids);
+
+static struct dfl_driver uio_dfl_driver = {
+ .drv = {
+ .name = DRIVER_NAME,
+ },
+ .id_table = uio_dfl_ids,
+ .probe = uio_dfl_probe,
+};
+module_dfl_driver(uio_dfl_driver);
+
+MODULE_DESCRIPTION("Generic DFL driver for Userspace I/O devices");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
--
2.7.4
next prev parent reply other threads:[~2021-02-27 15:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-27 15:27 [RESEND PATCH v11 0/2] UIO support for dfl devices Xu Yilun
2021-02-27 15:27 ` Xu Yilun [this message]
2021-02-27 15:42 ` [RESEND PATCH v11 1/2] uio: uio_dfl: add userspace i/o driver for DFL bus Greg KH
2021-02-27 17:39 ` Xu Yilun
2021-02-28 17:20 ` Moritz Fischer
2021-02-27 15:27 ` [RESEND PATCH v11 2/2] Documentation: fpga: dfl: Add description for DFL UIO support Xu Yilun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1614439624-3946-2-git-send-email-yilun.xu@intel.com \
--to=yilun.xu@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=hao.wu@intel.com \
--cc=lgoncalv@redhat.com \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mdf@kernel.org \
--cc=trix@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.