From: Dong Aisheng <aisheng.dong@nxp.com> To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org Cc: dongas86@gmail.com, kernel@pengutronix.de, shawnguo@kernel.org, robh+dt@kernel.org, linux-imx@nxp.com, jan.kiszka@siemens.com, Dong Aisheng <aisheng.dong@nxp.com>, Mark Rutland <mark.rutland@arm.com>, Fabio Estevam <fabio.estevam@nxp.com> Subject: [PATCH RESEND V5 05/14] arm64: dts: imx8: add conn lpcg clocks Date: Mon, 8 Mar 2021 11:14:21 +0800 [thread overview] Message-ID: <1615173270-6289-6-git-send-email-aisheng.dong@nxp.com> (raw) In-Reply-To: <1615173270-6289-1-git-send-email-aisheng.dong@nxp.com> Add conn lpcg clocks Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- ChangeLog: v3->v5: * no changes v2->v3: * update to use clock-indices property instead of bit-offset property v1->v2: * Use old SCU clock binding temporarily to avoid build warning due to SCU clock cell will be changed to 2. * add power domain propertyv1->v2: --- .../boot/dts/freescale/imx8-ss-conn.dtsi | 104 +++++++++++++++++- 1 file changed, 101 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index e7c442585b34..c5ab23aff452 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -4,15 +4,34 @@ * Dong Aisheng <aisheng.dong@nxp.com> */ +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + conn_subsys: bus@5b000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; - conn_lpcg: clock-controller@5b200000 { - reg = <0x5b200000 0xb0000>; - #clock-cells = <1>; + conn_axi_clk: clock-conn-axi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <333333333>; + clock-output-names = "conn_axi_clk"; + }; + + conn_ahb_clk: clock-conn-ahb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <166666666>; + clock-output-names = "conn_ahb_clk"; + }; + + conn_ipg_clk: clock-conn-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <83333333>; + clock-output-names = "conn_ipg_clk"; }; usdhc1: mmc@5b010000 { @@ -83,4 +102,83 @@ fec2: ethernet@5b050000 { power-domains = <&pd IMX_SC_R_ENET_1>; status = "disabled"; }; + + /* LPCG clocks */ + conn_lpcg: clock-controller-legacy@5b200000 { + reg = <0x5b200000 0xb0000>; + #clock-cells = <1>; + }; + + sdhc0_lpcg: clock-controller@5b200000 { + reg = <0x5b200000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_CONN_SDHC0_CLK>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc0_lpcg_per_clk", + "sdhc0_lpcg_ipg_clk", + "sdhc0_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + }; + + sdhc1_lpcg: clock-controller@5b210000 { + reg = <0x5b210000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_CONN_SDHC1_CLK>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc1_lpcg_per_clk", + "sdhc1_lpcg_ipg_clk", + "sdhc1_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_1>; + }; + + sdhc2_lpcg: clock-controller@5b220000 { + reg = <0x5b220000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_CONN_SDHC2_CLK>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc2_lpcg_per_clk", + "sdhc2_lpcg_ipg_clk", + "sdhc2_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_2>; + }; + + enet0_lpcg: clock-controller@5b230000 { + reg = <0x5b230000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_CONN_ENET0_ROOT_CLK>, + <&clk IMX_CONN_ENET0_ROOT_CLK>, + <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "enet0_ipg_root_clk", + "enet0_tx_clk", + "enet0_ahb_clk", + "enet0_ipg_clk", + "enet0_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_ENET_0>; + }; + + enet1_lpcg: clock-controller@5b240000 { + reg = <0x5b240000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_CONN_ENET1_ROOT_CLK>, + <&clk IMX_CONN_ENET1_ROOT_CLK>, + <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "enet1_ipg_root_clk", + "enet1_tx_clk", + "enet1_ahb_clk", + "enet1_ipg_clk", + "enet1_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_ENET_1>; + }; }; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Dong Aisheng <aisheng.dong@nxp.com> To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org Cc: dongas86@gmail.com, kernel@pengutronix.de, shawnguo@kernel.org, robh+dt@kernel.org, linux-imx@nxp.com, jan.kiszka@siemens.com, Dong Aisheng <aisheng.dong@nxp.com>, Mark Rutland <mark.rutland@arm.com>, Fabio Estevam <fabio.estevam@nxp.com> Subject: [PATCH RESEND V5 05/14] arm64: dts: imx8: add conn lpcg clocks Date: Mon, 8 Mar 2021 11:14:21 +0800 [thread overview] Message-ID: <1615173270-6289-6-git-send-email-aisheng.dong@nxp.com> (raw) In-Reply-To: <1615173270-6289-1-git-send-email-aisheng.dong@nxp.com> Add conn lpcg clocks Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- ChangeLog: v3->v5: * no changes v2->v3: * update to use clock-indices property instead of bit-offset property v1->v2: * Use old SCU clock binding temporarily to avoid build warning due to SCU clock cell will be changed to 2. * add power domain propertyv1->v2: --- .../boot/dts/freescale/imx8-ss-conn.dtsi | 104 +++++++++++++++++- 1 file changed, 101 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index e7c442585b34..c5ab23aff452 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -4,15 +4,34 @@ * Dong Aisheng <aisheng.dong@nxp.com> */ +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + conn_subsys: bus@5b000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; - conn_lpcg: clock-controller@5b200000 { - reg = <0x5b200000 0xb0000>; - #clock-cells = <1>; + conn_axi_clk: clock-conn-axi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <333333333>; + clock-output-names = "conn_axi_clk"; + }; + + conn_ahb_clk: clock-conn-ahb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <166666666>; + clock-output-names = "conn_ahb_clk"; + }; + + conn_ipg_clk: clock-conn-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <83333333>; + clock-output-names = "conn_ipg_clk"; }; usdhc1: mmc@5b010000 { @@ -83,4 +102,83 @@ fec2: ethernet@5b050000 { power-domains = <&pd IMX_SC_R_ENET_1>; status = "disabled"; }; + + /* LPCG clocks */ + conn_lpcg: clock-controller-legacy@5b200000 { + reg = <0x5b200000 0xb0000>; + #clock-cells = <1>; + }; + + sdhc0_lpcg: clock-controller@5b200000 { + reg = <0x5b200000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_CONN_SDHC0_CLK>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc0_lpcg_per_clk", + "sdhc0_lpcg_ipg_clk", + "sdhc0_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + }; + + sdhc1_lpcg: clock-controller@5b210000 { + reg = <0x5b210000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_CONN_SDHC1_CLK>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc1_lpcg_per_clk", + "sdhc1_lpcg_ipg_clk", + "sdhc1_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_1>; + }; + + sdhc2_lpcg: clock-controller@5b220000 { + reg = <0x5b220000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_CONN_SDHC2_CLK>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc2_lpcg_per_clk", + "sdhc2_lpcg_ipg_clk", + "sdhc2_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_2>; + }; + + enet0_lpcg: clock-controller@5b230000 { + reg = <0x5b230000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_CONN_ENET0_ROOT_CLK>, + <&clk IMX_CONN_ENET0_ROOT_CLK>, + <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "enet0_ipg_root_clk", + "enet0_tx_clk", + "enet0_ahb_clk", + "enet0_ipg_clk", + "enet0_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_ENET_0>; + }; + + enet1_lpcg: clock-controller@5b240000 { + reg = <0x5b240000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_CONN_ENET1_ROOT_CLK>, + <&clk IMX_CONN_ENET1_ROOT_CLK>, + <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "enet1_ipg_root_clk", + "enet1_tx_clk", + "enet1_ahb_clk", + "enet1_ipg_clk", + "enet1_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_ENET_1>; + }; }; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-08 3:28 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-08 3:14 [PATCH RESEND V5 00/14] arm64: dts: imx8: architecture improvement and adding imx8qm support Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 01/14] arm64: dts: imx8qxp: add fallback compatible string for scu pd Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 02/14] arm64: dts: imx8qxp: move scu pd node before scu clock node Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 03/14] arm64: dts: imx8qxp: orginize dts in subsystems Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 04/14] arm64: dts: imx8: add lsio lpcg clocks Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng [this message] 2021-03-08 3:14 ` [PATCH RESEND V5 05/14] arm64: dts: imx8: add conn " Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 06/14] arm64: dts: imx8: add adma " Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 07/14] arm64: dts: imx8: switch to two cell scu clock binding Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 08/14] arm64: dts: imx8: switch to new lpcg " Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 09/14] arm64: dts: imx8qm: add lsio ss support Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 10/14] arm64: dts: imx8qm: add conn " Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 11/14] arm64: dts: imx8: split adma ss into dma and audio ss Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 12/14] arm64: dts: imx8qm: add dma ss support Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 13/14] arm64: dts: imx: add imx8qm common dts file Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 3:14 ` [PATCH RESEND V5 14/14] arm64: dts: imx: add imx8qm mek support Dong Aisheng 2021-03-08 3:14 ` Dong Aisheng 2021-03-08 12:34 ` [PATCH RESEND V5 00/14] arm64: dts: imx8: architecture improvement and adding imx8qm support Shawn Guo 2021-03-08 12:34 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1615173270-6289-6-git-send-email-aisheng.dong@nxp.com \ --to=aisheng.dong@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=dongas86@gmail.com \ --cc=fabio.estevam@nxp.com \ --cc=jan.kiszka@siemens.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.