From: cy_huang <u0084500@gmail.com> To: lee.jones@linaro.org, lgirdwood@gmail.com, broonie@kernel.org, daniel.thompson@linaro.org, jingoohan1@gmail.com, b.zolnierkie@samsung.com Cc: dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, ChiYuan Huang <cy_huang@richtek.com> Subject: [PATCH v6 3/4] mfd: rt4831: Adds DT binding document for Richtek RT4831 Date: Sun, 28 Mar 2021 23:24:18 +0800 [thread overview] Message-ID: <1616945059-8718-3-git-send-email-u0084500@gmail.com> (raw) In-Reply-To: <1616945059-8718-1-git-send-email-u0084500@gmail.com> From: ChiYuan Huang <cy_huang@richtek.com> Adds DT binding document for Richtek RT4831. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> --- .../devicetree/bindings/mfd/richtek,rt4831.yaml | 90 ++++++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml new file mode 100644 index 00000000..4762eb1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt4831.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 DSV and Backlight Integrated IC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + RT4831 is a multifunctional device that can provide power to the LCD display + and LCD backlight. + + For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V. + It's sufficient to meet the current LCD power requirement. + + For the LCD backlight, it can provide four channel WLED driving capability. + Each channel driving current is up to 30mA + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +properties: + compatible: + const: richtek,rt4831 + + reg: + description: I2C device address. + maxItems: 1 + + enable-gpios: + description: | + GPIO to enable/disable the chip. It is optional. + Some usage directly tied this pin to follow VIO 1.8V power on sequence. + maxItems: 1 + + regulators: + $ref: ../regulator/richtek,rt4831-regulator.yaml + + backlight: + $ref: ../leds/backlight/richtek,rt4831-backlight.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/rt4831-backlight.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt4831@11 { + compatible = "richtek,rt4831"; + reg = <0x11>; + + regulators { + DSVLCM { + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-allow-bypass; + }; + DSVP { + regulator-name = "rt4831-dsvp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + DSVN { + regulator-name = "rt4831-dsvn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + }; + + backlight { + compatible = "richtek,rt4831-backlight"; + default-brightness = <1024>; + max-brightness = <2048>; + richtek,bled-ovp-sel = /bits/ 8 <RT4831_BLOVPLVL_21V>; + richtek,channel-use = /bits/ 8 <RT4831_BLED_ALLCHEN>; + }; + }; + }; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: cy_huang <u0084500@gmail.com> To: lee.jones@linaro.org, lgirdwood@gmail.com, broonie@kernel.org, daniel.thompson@linaro.org, jingoohan1@gmail.com, b.zolnierkie@samsung.com Cc: ChiYuan Huang <cy_huang@richtek.com>, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org Subject: [PATCH v6 3/4] mfd: rt4831: Adds DT binding document for Richtek RT4831 Date: Sun, 28 Mar 2021 23:24:18 +0800 [thread overview] Message-ID: <1616945059-8718-3-git-send-email-u0084500@gmail.com> (raw) In-Reply-To: <1616945059-8718-1-git-send-email-u0084500@gmail.com> From: ChiYuan Huang <cy_huang@richtek.com> Adds DT binding document for Richtek RT4831. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> --- .../devicetree/bindings/mfd/richtek,rt4831.yaml | 90 ++++++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml new file mode 100644 index 00000000..4762eb1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt4831.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 DSV and Backlight Integrated IC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + RT4831 is a multifunctional device that can provide power to the LCD display + and LCD backlight. + + For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V. + It's sufficient to meet the current LCD power requirement. + + For the LCD backlight, it can provide four channel WLED driving capability. + Each channel driving current is up to 30mA + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +properties: + compatible: + const: richtek,rt4831 + + reg: + description: I2C device address. + maxItems: 1 + + enable-gpios: + description: | + GPIO to enable/disable the chip. It is optional. + Some usage directly tied this pin to follow VIO 1.8V power on sequence. + maxItems: 1 + + regulators: + $ref: ../regulator/richtek,rt4831-regulator.yaml + + backlight: + $ref: ../leds/backlight/richtek,rt4831-backlight.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/rt4831-backlight.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt4831@11 { + compatible = "richtek,rt4831"; + reg = <0x11>; + + regulators { + DSVLCM { + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-allow-bypass; + }; + DSVP { + regulator-name = "rt4831-dsvp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + DSVN { + regulator-name = "rt4831-dsvn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + }; + + backlight { + compatible = "richtek,rt4831-backlight"; + default-brightness = <1024>; + max-brightness = <2048>; + richtek,bled-ovp-sel = /bits/ 8 <RT4831_BLOVPLVL_21V>; + richtek,channel-use = /bits/ 8 <RT4831_BLED_ALLCHEN>; + }; + }; + }; -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2021-03-28 15:25 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-28 15:24 [PATCH v6 1/4] mfd: rt4831: Adds support for Richtek RT4831 cy_huang 2021-03-28 15:24 ` cy_huang 2021-03-28 15:24 ` [PATCH v6 2/4] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight cy_huang 2021-03-28 15:24 ` cy_huang 2021-03-29 10:28 ` Daniel Thompson 2021-03-29 10:28 ` Daniel Thompson 2021-03-28 15:24 ` cy_huang [this message] 2021-03-28 15:24 ` [PATCH v6 3/4] mfd: rt4831: Adds DT binding document for Richtek RT4831 cy_huang 2021-03-28 15:24 ` [PATCH v6 4/4] backlight: rt4831: Adds support for Richtek RT4831 backlight cy_huang 2021-03-28 15:24 ` cy_huang 2021-03-29 10:26 ` Daniel Thompson 2021-03-29 10:26 ` Daniel Thompson 2021-03-29 13:46 ` ChiYuan Huang 2021-03-29 13:46 ` ChiYuan Huang 2021-04-19 5:57 ` [PATCH v6 1/4] mfd: rt4831: Adds support for Richtek RT4831 ChiYuan Huang 2021-04-19 5:57 ` ChiYuan Huang 2021-04-19 7:22 ` Lee Jones 2021-04-19 7:22 ` Lee Jones 2021-04-19 7:23 ` Lee Jones 2021-04-19 7:23 ` Lee Jones 2021-04-19 7:24 ` Lee Jones 2021-04-19 7:24 ` Lee Jones 2021-04-19 9:55 ` ChiYuan Huang 2021-04-19 9:55 ` ChiYuan Huang 2021-04-23 0:58 ` ChiYuan Huang 2021-04-23 0:58 ` ChiYuan Huang 2021-04-23 8:27 ` Lee Jones 2021-04-23 8:27 ` Lee Jones
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1616945059-8718-3-git-send-email-u0084500@gmail.com \ --to=u0084500@gmail.com \ --cc=b.zolnierkie@samsung.com \ --cc=broonie@kernel.org \ --cc=cy_huang@richtek.com \ --cc=daniel.thompson@linaro.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jingoohan1@gmail.com \ --cc=lee.jones@linaro.org \ --cc=lgirdwood@gmail.com \ --cc=linux-fbdev@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.