From: dillon.minfei@gmail.com To: robh@kernel.org, valentin.caron@foss.st.com, Alexandre.torgue@foss.st.com, rong.a.chen@intel.com, a.fatoum@pengutronix.de, mcoquelin.stm32@gmail.com, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux@armlinux.org.uk, afzal.mohd.ma@gmail.com, gregkh@linuxfoundation.org, erwan.leray@foss.st.com, erwan.leray@st.com, linux-serial@vger.kernel.org, lkp@intel.com, patrice.chotard@foss.st.com Cc: dillon min <dillon.minfei@gmail.com> Subject: [PATCH v8 0/6] ARM: STM32: add art-pi(stm32h750xbh6) board support Date: Tue, 30 Mar 2021 16:58:18 +0800 [thread overview] Message-ID: <1617094704-10040-1-git-send-email-dillon.minfei@gmail.com> (raw) From: dillon min <dillon.minfei@gmail.com> This patchset intend to add art-pi board support, this board developed by rt-thread(https://www.rt-thread.org/). Board resources: 8MiB QSPI flash 16MiB SPI flash 32MiB SDRAM AP6212 wifi,bt,fm comb sw context: - as stm32h750 just has 128k bytes internal flash, so running a fw on internal flash to download u-boot/kernel to qspi flash, boot u-boot/kernel from qspi flash. this fw is based on rt-thread. - kernel can be xip on qspi flash or load to sdram - root filesystem is jffs2(created by buildroot), stored on spi flash to support the boad, add following changes. - fix r0-r3, r12 register restore failed after svc call, - add dts binding - update yaml doc --- changes in v8: - drop '[PATCH v7 3/6] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750' - stm32h743-pinctrl.dtsi file - move compatible string "st,stm32h743-pinctrl" from stm32h7-pinctrl.dtsi to stm32h743.dtsi - update stm32h743i-{dico/eval}.dtsi to include stm32h7-pinctrl.dtsi - move file stm32h743.dtsi submit position to [PATCH V8 3/6] v7 link: https://lore.kernel.org/lkml/1617071338-9436-1-git-send-email-dillon.minfei@gmail.com/ changes in v7: - remove changes in Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml Hi Rob Herring as you has already ack this patch, please ignore it. thanks history link: https://lore.kernel.org/lkml/1614758717-18223-4-git-send-email-dillon.minfei@gmail.com/ https://lore.kernel.org/lkml/20210308195033.GA2855292@robh.at.kernel.org/ - remove "[PATCH v6 8/9] pinctrl: stm32: Add STM32H750 MCU pinctrl support" remove "[PATCH v6 5/9] ARM: dts: stm32: add stm32h750-pinctrl.dtsi" - reference to stm32h743-pinctrl.dtsi in stm32h750i-art-pi.dts v6 link: https://lore.kernel.org/lkml/1616757302-7889-1-git-send-email-dillon.minfei@gmail.com/ changes in v6: - add gpiox{gpio-ranges, ngpios} in stm32h7-pinctrl.dtsi - add status="disabled" in stm32h743.dtsi changes in v5: - accroding to rob's suggestion, replace false with 'type: object' of 'additionalProperties'. - add Tested-by: Valentin Caron <valentin.caron@foss.st.com> changes in v4: - use unevaluatedProperties: false to fix dtbs_check warrnings instead of add 'bluetooth' in st,stm32-uart.yaml changes in v3: - fix dtbs_check warrning: (8002cbd78fd5 and 4bc21d3dd678) >> arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: pin-controller: {'type': 'object'} is not allowed for {'#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, >> arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: 'i2c@40005C00', 'i2c@58001C00' do not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+' >> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' changes in v2: - reorganize the pinctrl device tree about stm32h7-pinctrl/stm32h743/750-pinctrl stm32h7-pinctrl.dtsi --> stm32h743-pinctrl.dtsi --> stm32h743i-disco.dts | |-> stm32h743i-eval.dts |-> stm32h750-pinctrl.dtsi --> stm32h750i-art-pi.dts same to the stm32f7/f4's pinctrl style - fix author name/copyright mistake - add compatible string st,stm32h750-pinctrl to pinctl-stm32h743.c as they have same pin alternate functions, update Kconfig description - make item in stm32h750i-art-pi.dts sort by letter *** BLURB HERE *** dillon min (6): Documentation: arm: stm32: Add stm32h750 value line doc dt-bindings: arm: stm32: Add compatible strings for ART-PI board ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 ARM: stm32: Add a new SOC - STM32H750 dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties' Documentation/arm/index.rst | 1 + Documentation/arm/stm32/stm32h750-overview.rst | 34 ++ .../devicetree/bindings/arm/stm32/stm32.yaml | 4 + .../devicetree/bindings/serial/st,stm32-uart.yaml | 3 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/stm32h7-pinctrl.dtsi | 341 +++++++++++++++++++++ arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 306 ------------------ arch/arm/boot/dts/stm32h743.dtsi | 165 +++++++++- arch/arm/boot/dts/stm32h743i-disco.dts | 2 +- arch/arm/boot/dts/stm32h743i-eval.dts | 2 +- arch/arm/boot/dts/stm32h750.dtsi | 6 + arch/arm/boot/dts/stm32h750i-art-pi.dts | 229 ++++++++++++++ arch/arm/mach-stm32/board-dt.c | 1 + 13 files changed, 784 insertions(+), 311 deletions(-) create mode 100644 Documentation/arm/stm32/stm32h750-overview.rst create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi delete mode 100644 arch/arm/boot/dts/stm32h743-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/stm32h750.dtsi create mode 100644 arch/arm/boot/dts/stm32h750i-art-pi.dts -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: dillon.minfei@gmail.com To: robh@kernel.org, valentin.caron@foss.st.com, Alexandre.torgue@foss.st.com, rong.a.chen@intel.com, a.fatoum@pengutronix.de, mcoquelin.stm32@gmail.com, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux@armlinux.org.uk, afzal.mohd.ma@gmail.com, gregkh@linuxfoundation.org, erwan.leray@foss.st.com, erwan.leray@st.com, linux-serial@vger.kernel.org, lkp@intel.com, patrice.chotard@foss.st.com Cc: dillon min <dillon.minfei@gmail.com> Subject: [PATCH v8 0/6] ARM: STM32: add art-pi(stm32h750xbh6) board support Date: Tue, 30 Mar 2021 16:58:18 +0800 [thread overview] Message-ID: <1617094704-10040-1-git-send-email-dillon.minfei@gmail.com> (raw) From: dillon min <dillon.minfei@gmail.com> This patchset intend to add art-pi board support, this board developed by rt-thread(https://www.rt-thread.org/). Board resources: 8MiB QSPI flash 16MiB SPI flash 32MiB SDRAM AP6212 wifi,bt,fm comb sw context: - as stm32h750 just has 128k bytes internal flash, so running a fw on internal flash to download u-boot/kernel to qspi flash, boot u-boot/kernel from qspi flash. this fw is based on rt-thread. - kernel can be xip on qspi flash or load to sdram - root filesystem is jffs2(created by buildroot), stored on spi flash to support the boad, add following changes. - fix r0-r3, r12 register restore failed after svc call, - add dts binding - update yaml doc --- changes in v8: - drop '[PATCH v7 3/6] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750' - stm32h743-pinctrl.dtsi file - move compatible string "st,stm32h743-pinctrl" from stm32h7-pinctrl.dtsi to stm32h743.dtsi - update stm32h743i-{dico/eval}.dtsi to include stm32h7-pinctrl.dtsi - move file stm32h743.dtsi submit position to [PATCH V8 3/6] v7 link: https://lore.kernel.org/lkml/1617071338-9436-1-git-send-email-dillon.minfei@gmail.com/ changes in v7: - remove changes in Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml Hi Rob Herring as you has already ack this patch, please ignore it. thanks history link: https://lore.kernel.org/lkml/1614758717-18223-4-git-send-email-dillon.minfei@gmail.com/ https://lore.kernel.org/lkml/20210308195033.GA2855292@robh.at.kernel.org/ - remove "[PATCH v6 8/9] pinctrl: stm32: Add STM32H750 MCU pinctrl support" remove "[PATCH v6 5/9] ARM: dts: stm32: add stm32h750-pinctrl.dtsi" - reference to stm32h743-pinctrl.dtsi in stm32h750i-art-pi.dts v6 link: https://lore.kernel.org/lkml/1616757302-7889-1-git-send-email-dillon.minfei@gmail.com/ changes in v6: - add gpiox{gpio-ranges, ngpios} in stm32h7-pinctrl.dtsi - add status="disabled" in stm32h743.dtsi changes in v5: - accroding to rob's suggestion, replace false with 'type: object' of 'additionalProperties'. - add Tested-by: Valentin Caron <valentin.caron@foss.st.com> changes in v4: - use unevaluatedProperties: false to fix dtbs_check warrnings instead of add 'bluetooth' in st,stm32-uart.yaml changes in v3: - fix dtbs_check warrning: (8002cbd78fd5 and 4bc21d3dd678) >> arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: pin-controller: {'type': 'object'} is not allowed for {'#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, >> arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: 'i2c@40005C00', 'i2c@58001C00' do not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+' >> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' changes in v2: - reorganize the pinctrl device tree about stm32h7-pinctrl/stm32h743/750-pinctrl stm32h7-pinctrl.dtsi --> stm32h743-pinctrl.dtsi --> stm32h743i-disco.dts | |-> stm32h743i-eval.dts |-> stm32h750-pinctrl.dtsi --> stm32h750i-art-pi.dts same to the stm32f7/f4's pinctrl style - fix author name/copyright mistake - add compatible string st,stm32h750-pinctrl to pinctl-stm32h743.c as they have same pin alternate functions, update Kconfig description - make item in stm32h750i-art-pi.dts sort by letter *** BLURB HERE *** dillon min (6): Documentation: arm: stm32: Add stm32h750 value line doc dt-bindings: arm: stm32: Add compatible strings for ART-PI board ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 ARM: stm32: Add a new SOC - STM32H750 dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties' Documentation/arm/index.rst | 1 + Documentation/arm/stm32/stm32h750-overview.rst | 34 ++ .../devicetree/bindings/arm/stm32/stm32.yaml | 4 + .../devicetree/bindings/serial/st,stm32-uart.yaml | 3 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/stm32h7-pinctrl.dtsi | 341 +++++++++++++++++++++ arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 306 ------------------ arch/arm/boot/dts/stm32h743.dtsi | 165 +++++++++- arch/arm/boot/dts/stm32h743i-disco.dts | 2 +- arch/arm/boot/dts/stm32h743i-eval.dts | 2 +- arch/arm/boot/dts/stm32h750.dtsi | 6 + arch/arm/boot/dts/stm32h750i-art-pi.dts | 229 ++++++++++++++ arch/arm/mach-stm32/board-dt.c | 1 + 13 files changed, 784 insertions(+), 311 deletions(-) create mode 100644 Documentation/arm/stm32/stm32h750-overview.rst create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi delete mode 100644 arch/arm/boot/dts/stm32h743-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/stm32h750.dtsi create mode 100644 arch/arm/boot/dts/stm32h750i-art-pi.dts -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-03-30 8:59 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-30 8:58 dillon.minfei [this message] 2021-03-30 8:58 ` [PATCH v8 0/6] ARM: STM32: add art-pi(stm32h750xbh6) board support dillon.minfei 2021-03-30 8:58 ` [PATCH v8 1/6] Documentation: arm: stm32: Add stm32h750 value line doc dillon.minfei 2021-03-30 8:58 ` dillon.minfei 2021-03-30 8:58 ` [PATCH v8 2/6] dt-bindings: arm: stm32: Add compatible strings for ART-PI board dillon.minfei 2021-03-30 8:58 ` dillon.minfei 2021-03-30 8:58 ` [PATCH v8 3/6] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei 2021-03-30 8:58 ` dillon.minfei 2021-03-30 16:44 ` Alexandre TORGUE 2021-03-30 16:44 ` Alexandre TORGUE 2021-03-30 23:06 ` dillon min 2021-03-30 23:06 ` dillon min 2021-03-30 8:58 ` [PATCH v8 4/6] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei 2021-03-30 8:58 ` dillon.minfei 2021-03-30 16:50 ` Alexandre TORGUE 2021-03-30 16:50 ` Alexandre TORGUE 2021-03-30 22:43 ` dillon min 2021-03-30 22:43 ` dillon min 2021-03-31 7:18 ` Alexandre TORGUE 2021-03-31 7:18 ` Alexandre TORGUE 2021-03-31 7:25 ` dillon min 2021-03-31 7:25 ` dillon min 2021-03-30 8:58 ` [PATCH v8 5/6] ARM: stm32: Add a new SOC - STM32H750 dillon.minfei 2021-03-30 8:58 ` dillon.minfei 2021-03-30 8:58 ` [PATCH v8 6/6] dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties' dillon.minfei 2021-03-30 8:58 ` dillon.minfei
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1617094704-10040-1-git-send-email-dillon.minfei@gmail.com \ --to=dillon.minfei@gmail.com \ --cc=Alexandre.torgue@foss.st.com \ --cc=a.fatoum@pengutronix.de \ --cc=afzal.mohd.ma@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=erwan.leray@foss.st.com \ --cc=erwan.leray@st.com \ --cc=gregkh@linuxfoundation.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=linux@armlinux.org.uk \ --cc=lkp@intel.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=patrice.chotard@foss.st.com \ --cc=robh@kernel.org \ --cc=rong.a.chen@intel.com \ --cc=valentin.caron@foss.st.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.