All of lore.kernel.org
 help / color / mirror / Atom feed
From: Qii Wang <qii.wang@mediatek.com>
To: <wsa@the-dreams.de>
Cc: <matthias.bgg@gmail.com>, <linux-i2c@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, <leilk.liu@mediatek.com>,
	<qii.wang@mediatek.com>
Subject: [PATCH 1/3] i2c: mediatek: Fix send master code at more than 1MHz
Date: Sat, 17 Apr 2021 14:46:50 +0800	[thread overview]
Message-ID: <1618642012-10444-2-git-send-email-qii.wang@mediatek.com> (raw)
In-Reply-To: <1618642012-10444-1-git-send-email-qii.wang@mediatek.com>

There are some omissions in the previous patch about replacing
I2C_MAX_FAST_MODE__FREQ with I2C_MAX_FAST_MODE_PLUS_FREQ and
need to fix it.

Fixes: b44658e755b5("i2c: mediatek: Send i2c master code at more than 1MHz")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
 drivers/i2c/busses/i2c-mt65xx.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 2ffd2f3..3e34261 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -564,7 +564,7 @@ static const struct i2c_spec_values *mtk_i2c_get_spec(unsigned int speed)
 
 static int mtk_i2c_max_step_cnt(unsigned int target_speed)
 {
-	if (target_speed > I2C_MAX_FAST_MODE_FREQ)
+	if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
 		return MAX_HS_STEP_CNT_DIV;
 	else
 		return MAX_STEP_CNT_DIV;
@@ -635,7 +635,7 @@ static int mtk_i2c_check_ac_timing(struct mtk_i2c *i2c,
 	if (sda_min > sda_max)
 		return -3;
 
-	if (check_speed > I2C_MAX_FAST_MODE_FREQ) {
+	if (check_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
 		if (i2c->dev_comp->ltiming_adjust) {
 			i2c->ac_timing.hs = I2C_TIME_DEFAULT_VALUE |
 				(sample_cnt << 12) | (high_cnt << 8);
@@ -850,7 +850,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 
 	control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
 			~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
-	if ((i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ) || (left_num >= 1))
+	if ((i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) || (left_num >= 1))
 		control_reg |= I2C_CONTROL_RS;
 
 	if (i2c->op == I2C_MASTER_WRRD)
@@ -1067,7 +1067,8 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
 		}
 	}
 
-	if (i2c->auto_restart && num >= 2 && i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ)
+	if (i2c->auto_restart && num >= 2 &&
+		i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ)
 		/* ignore the first restart irq after the master code,
 		 * otherwise the first transfer will be discarded.
 		 */
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: Qii Wang <qii.wang@mediatek.com>
To: <wsa@the-dreams.de>
Cc: <matthias.bgg@gmail.com>, <linux-i2c@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, <leilk.liu@mediatek.com>,
	<qii.wang@mediatek.com>
Subject: [PATCH 1/3] i2c: mediatek: Fix send master code at more than 1MHz
Date: Sat, 17 Apr 2021 14:46:50 +0800	[thread overview]
Message-ID: <1618642012-10444-2-git-send-email-qii.wang@mediatek.com> (raw)
In-Reply-To: <1618642012-10444-1-git-send-email-qii.wang@mediatek.com>

There are some omissions in the previous patch about replacing
I2C_MAX_FAST_MODE__FREQ with I2C_MAX_FAST_MODE_PLUS_FREQ and
need to fix it.

Fixes: b44658e755b5("i2c: mediatek: Send i2c master code at more than 1MHz")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
 drivers/i2c/busses/i2c-mt65xx.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 2ffd2f3..3e34261 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -564,7 +564,7 @@ static const struct i2c_spec_values *mtk_i2c_get_spec(unsigned int speed)
 
 static int mtk_i2c_max_step_cnt(unsigned int target_speed)
 {
-	if (target_speed > I2C_MAX_FAST_MODE_FREQ)
+	if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
 		return MAX_HS_STEP_CNT_DIV;
 	else
 		return MAX_STEP_CNT_DIV;
@@ -635,7 +635,7 @@ static int mtk_i2c_check_ac_timing(struct mtk_i2c *i2c,
 	if (sda_min > sda_max)
 		return -3;
 
-	if (check_speed > I2C_MAX_FAST_MODE_FREQ) {
+	if (check_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
 		if (i2c->dev_comp->ltiming_adjust) {
 			i2c->ac_timing.hs = I2C_TIME_DEFAULT_VALUE |
 				(sample_cnt << 12) | (high_cnt << 8);
@@ -850,7 +850,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 
 	control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
 			~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
-	if ((i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ) || (left_num >= 1))
+	if ((i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) || (left_num >= 1))
 		control_reg |= I2C_CONTROL_RS;
 
 	if (i2c->op == I2C_MASTER_WRRD)
@@ -1067,7 +1067,8 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
 		}
 	}
 
-	if (i2c->auto_restart && num >= 2 && i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ)
+	if (i2c->auto_restart && num >= 2 &&
+		i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ)
 		/* ignore the first restart irq after the master code,
 		 * otherwise the first transfer will be discarded.
 		 */
-- 
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Qii Wang <qii.wang@mediatek.com>
To: <wsa@the-dreams.de>
Cc: <matthias.bgg@gmail.com>, <linux-i2c@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, <leilk.liu@mediatek.com>,
	<qii.wang@mediatek.com>
Subject: [PATCH 1/3] i2c: mediatek: Fix send master code at more than 1MHz
Date: Sat, 17 Apr 2021 14:46:50 +0800	[thread overview]
Message-ID: <1618642012-10444-2-git-send-email-qii.wang@mediatek.com> (raw)
In-Reply-To: <1618642012-10444-1-git-send-email-qii.wang@mediatek.com>

There are some omissions in the previous patch about replacing
I2C_MAX_FAST_MODE__FREQ with I2C_MAX_FAST_MODE_PLUS_FREQ and
need to fix it.

Fixes: b44658e755b5("i2c: mediatek: Send i2c master code at more than 1MHz")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
 drivers/i2c/busses/i2c-mt65xx.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 2ffd2f3..3e34261 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -564,7 +564,7 @@ static const struct i2c_spec_values *mtk_i2c_get_spec(unsigned int speed)
 
 static int mtk_i2c_max_step_cnt(unsigned int target_speed)
 {
-	if (target_speed > I2C_MAX_FAST_MODE_FREQ)
+	if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
 		return MAX_HS_STEP_CNT_DIV;
 	else
 		return MAX_STEP_CNT_DIV;
@@ -635,7 +635,7 @@ static int mtk_i2c_check_ac_timing(struct mtk_i2c *i2c,
 	if (sda_min > sda_max)
 		return -3;
 
-	if (check_speed > I2C_MAX_FAST_MODE_FREQ) {
+	if (check_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
 		if (i2c->dev_comp->ltiming_adjust) {
 			i2c->ac_timing.hs = I2C_TIME_DEFAULT_VALUE |
 				(sample_cnt << 12) | (high_cnt << 8);
@@ -850,7 +850,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 
 	control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
 			~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
-	if ((i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ) || (left_num >= 1))
+	if ((i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) || (left_num >= 1))
 		control_reg |= I2C_CONTROL_RS;
 
 	if (i2c->op == I2C_MASTER_WRRD)
@@ -1067,7 +1067,8 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
 		}
 	}
 
-	if (i2c->auto_restart && num >= 2 && i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ)
+	if (i2c->auto_restart && num >= 2 &&
+		i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ)
 		/* ignore the first restart irq after the master code,
 		 * otherwise the first transfer will be discarded.
 		 */
-- 
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-04-17  6:47 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-17  6:46 [PATCH 0/3] Add some fix patches Qii Wang
2021-04-17  6:46 ` Qii Wang
2021-04-17  6:46 ` Qii Wang
2021-04-17  6:46 ` Qii Wang [this message]
2021-04-17  6:46   ` [PATCH 1/3] i2c: mediatek: Fix send master code at more than 1MHz Qii Wang
2021-04-17  6:46   ` Qii Wang
2021-04-17 20:06   ` Wolfram Sang
2021-04-17 20:06     ` Wolfram Sang
2021-04-17 20:06     ` Wolfram Sang
2021-04-17  6:46 ` [PATCH 2/3] i2c: mediatek: Fix wrong dma sync flag Qii Wang
2021-04-17  6:46   ` Qii Wang
2021-04-17  6:46   ` Qii Wang
2021-04-17 20:07   ` Wolfram Sang
2021-04-17 20:07     ` Wolfram Sang
2021-04-17 20:07     ` Wolfram Sang
2021-04-17  6:46 ` [PATCH 3/3] i2c: mediatek: Use scl_int_delay_ns to compensate clock-stretching Qii Wang
2021-04-17  6:46   ` Qii Wang
2021-04-17  6:46   ` Qii Wang
2021-04-17 20:09   ` Wolfram Sang
2021-04-17 20:09     ` Wolfram Sang
2021-04-17 20:09     ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1618642012-10444-2-git-send-email-qii.wang@mediatek.com \
    --to=qii.wang@mediatek.com \
    --cc=leilk.liu@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.