All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, kuba@kernel.org, gospo@broadcom.com,
	alexander.duyck@gmail.com
Subject: [PATCH net v2] bnxt_en: Fix and improve .ndo_features_check().
Date: Fri,  7 May 2021 20:29:28 -0400	[thread overview]
Message-ID: <1620433768-31048-1-git-send-email-michael.chan@broadcom.com> (raw)

Jakub Kicinski pointed out that we need to handle ipv6 extension headers
and to explicitly check for supported tunnel types in
.ndo_features_check().

For ipv6 extension headers, the hardware supports up to 2 ext. headers
and each must be <= 64 bytes.  For tunneled packets, the supported
packets are UDP with supported VXLAN and Geneve ports, GRE, and IPIP.

v2: Add missing step to check inner ipv6 header for UDP and GRE tunnels.
    Check TCP/UDP next header after skipping ipv6 ext headers for
    non-tunneled packets and for inner ipv6.
    (Both feedback from Alexander Duyck)

Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Fixes: 1698d600b361 ("bnxt_en: Implement .ndo_features_check().")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 125 +++++++++++++++++++---
 1 file changed, 108 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 39ac9e2f5118..8e4670e37140 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -10785,37 +10785,128 @@ static int bnxt_set_features(struct net_device *dev, netdev_features_t features)
 	return rc;
 }
 
+static bool bnxt_exthdr_check(struct bnxt *bp, struct sk_buff *skb, int nw_off,
+			      u8 *nextproto)
+{
+	struct ipv6hdr *ip6h = (struct ipv6hdr *)(skb->data + nw_off);
+	int hdr_count = 0;
+	u8 nexthdr;
+	int start;
+
+	/* Check that there are at most 2 IPv6 extension headers, no
+	 * fragment header, and each is <= 64 bytes.
+	 */
+	start = nw_off + sizeof(*ip6h);
+	nexthdr = ip6h->nexthdr;
+	while (ipv6_ext_hdr(nexthdr)) {
+		struct ipv6_opt_hdr _hdr, *hp;
+		int hdrlen;
+
+		if (hdr_count >= 3 || nexthdr == NEXTHDR_NONE ||
+		    nexthdr == NEXTHDR_FRAGMENT)
+			return false;
+		hp = skb_header_pointer(skb, start, sizeof(_hdr), &_hdr);
+		if (!hp)
+			return false;
+		if (nexthdr == NEXTHDR_AUTH)
+			hdrlen = ipv6_authlen(hp);
+		else
+			hdrlen = ipv6_optlen(hp);
+
+		if (hdrlen > 64)
+			return false;
+		nexthdr = hp->nexthdr;
+		start += hdrlen;
+		hdr_count++;
+	}
+	/* Only support TCP/UDP unless the caller checks the nextproto. */
+	if (nextproto) {
+		*nextproto = nexthdr;
+		return true;
+	}
+	if (nexthdr == IPPROTO_TCP || nexthdr == IPPROTO_UDP)
+		return true;
+	return false;
+}
+
+/* For UDP, we can only handle 1 Vxlan port and 1 Geneve port. */
+static bool bnxt_udp_tunl_check(struct bnxt *bp, struct sk_buff *skb)
+{
+	struct udphdr *uh = udp_hdr(skb);
+	__be16 udp_port = uh->dest;
+
+	if (udp_port != bp->vxlan_port && udp_port != bp->nge_port)
+		return false;
+	if (skb->inner_protocol_type == ENCAP_TYPE_ETHER) {
+		struct ethhdr *eh = inner_eth_hdr(skb);
+
+		switch (eh->h_proto) {
+		case htons(ETH_P_IP):
+			return true;
+		case htons(ETH_P_IPV6):
+			return bnxt_exthdr_check(bp, skb,
+						 skb_inner_network_offset(skb),
+						 NULL);
+		}
+	}
+	return false;
+}
+
+static bool bnxt_tunl_check(struct bnxt *bp, struct sk_buff *skb, u8 l4_proto)
+{
+	switch (l4_proto) {
+	case IPPROTO_UDP:
+		return bnxt_udp_tunl_check(bp, skb);
+	case IPPROTO_IPIP:
+		return true;
+	case IPPROTO_GRE: {
+		switch (skb->inner_protocol) {
+		default:
+			return false;
+		case htons(ETH_P_IP):
+			return true;
+		case htons(ETH_P_IPV6):
+			fallthrough;
+		}
+	}
+	case IPPROTO_IPV6:
+		/* Check ext headers of inner ipv6 */
+		return bnxt_exthdr_check(bp, skb, skb_inner_network_offset(skb),
+					 NULL);
+	}
+	return false;
+}
+
 static netdev_features_t bnxt_features_check(struct sk_buff *skb,
 					     struct net_device *dev,
 					     netdev_features_t features)
 {
-	struct bnxt *bp;
-	__be16 udp_port;
+	struct bnxt *bp = netdev_priv(dev);
 	u8 l4_proto = 0;
 
 	features = vlan_features_check(skb, features);
-	if (!skb->encapsulation)
-		return features;
-
 	switch (vlan_get_protocol(skb)) {
 	case htons(ETH_P_IP):
+		if (!skb->encapsulation)
+			return features;
 		l4_proto = ip_hdr(skb)->protocol;
-		break;
+		if (!bnxt_tunl_check(bp, skb, l4_proto))
+			goto disable_offload;
+		return features;
 	case htons(ETH_P_IPV6):
-		l4_proto = ipv6_hdr(skb)->nexthdr;
+		if (!bnxt_exthdr_check(bp, skb, skb_network_offset(skb),
+				       &l4_proto))
+			goto disable_offload;
+		if (skb->encapsulation) {
+			if (bnxt_tunl_check(bp, skb, l4_proto))
+				return features;
+		} else if (l4_proto == IPPROTO_TCP || l4_proto == IPPROTO_UDP) {
+			return features;
+		}
 		break;
-	default:
-		return features;
 	}
 
-	if (l4_proto != IPPROTO_UDP)
-		return features;
-
-	bp = netdev_priv(dev);
-	/* For UDP, we can only handle 1 Vxlan port and 1 Geneve port. */
-	udp_port = udp_hdr(skb)->dest;
-	if (udp_port == bp->vxlan_port || udp_port == bp->nge_port)
-		return features;
+disable_offload:
 	return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
 }
 
-- 
2.18.1


             reply	other threads:[~2021-05-08  0:29 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-08  0:29 Michael Chan [this message]
2021-05-10 15:41 ` [PATCH net v2] bnxt_en: Fix and improve .ndo_features_check() Alexander Duyck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1620433768-31048-1-git-send-email-michael.chan@broadcom.com \
    --to=michael.chan@broadcom.com \
    --cc=alexander.duyck@gmail.com \
    --cc=davem@davemloft.net \
    --cc=gospo@broadcom.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.