All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Thierry Reding <treding@nvidia.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Paul Cercueil <paul@crapouillou.net>,
	Lee Jones <lee.jones@linaro.org>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>
Subject: [PATCH 1/3] usb: common: usb-conn-gpio: fix NULL pointer dereference of charger
Date: Wed, 19 May 2021 14:34:13 +0800	[thread overview]
Message-ID: <1621406055-18749-1-git-send-email-chunfeng.yun@mediatek.com> (raw)

When power on system with OTG cable, IDDIG's interrupt arises before
the charger registration, it will cause a NULL pointer dereference,
fix the issue by registering the power supply before requesting
IDDIG/VBUS irq.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/common/usb-conn-gpio.c | 44 ++++++++++++++++++------------
 1 file changed, 26 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
index 6c4e3a19f42c..c9545a4eff66 100644
--- a/drivers/usb/common/usb-conn-gpio.c
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -149,14 +149,32 @@ static int usb_charger_get_property(struct power_supply *psy,
 	return 0;
 }
 
-static int usb_conn_probe(struct platform_device *pdev)
+static int usb_conn_psy_register(struct usb_conn_info *info)
 {
-	struct device *dev = &pdev->dev;
-	struct power_supply_desc *desc;
-	struct usb_conn_info *info;
+	struct device *dev = info->dev;
+	struct power_supply_desc *desc = &info->desc;
 	struct power_supply_config cfg = {
 		.of_node = dev->of_node,
 	};
+
+	desc->name = "usb-charger";
+	desc->properties = usb_charger_properties;
+	desc->num_properties = ARRAY_SIZE(usb_charger_properties);
+	desc->get_property = usb_charger_get_property;
+	desc->type = POWER_SUPPLY_TYPE_USB;
+	cfg.drv_data = info;
+
+	info->charger = devm_power_supply_register(dev, desc, &cfg);
+	if (IS_ERR(info->charger))
+		dev_err(dev, "Unable to register charger\n");
+
+	return PTR_ERR_OR_ZERO(info->charger);
+}
+
+static int usb_conn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_conn_info *info;
 	bool need_vbus = true;
 	int ret = 0;
 
@@ -218,6 +236,10 @@ static int usb_conn_probe(struct platform_device *pdev)
 		return PTR_ERR(info->role_sw);
 	}
 
+	ret = usb_conn_psy_register(info);
+	if (ret)
+		goto put_role_sw;
+
 	if (info->id_gpiod) {
 		info->id_irq = gpiod_to_irq(info->id_gpiod);
 		if (info->id_irq < 0) {
@@ -252,20 +274,6 @@ static int usb_conn_probe(struct platform_device *pdev)
 		}
 	}
 
-	desc = &info->desc;
-	desc->name = "usb-charger";
-	desc->properties = usb_charger_properties;
-	desc->num_properties = ARRAY_SIZE(usb_charger_properties);
-	desc->get_property = usb_charger_get_property;
-	desc->type = POWER_SUPPLY_TYPE_USB;
-	cfg.drv_data = info;
-
-	info->charger = devm_power_supply_register(dev, desc, &cfg);
-	if (IS_ERR(info->charger)) {
-		dev_err(dev, "Unable to register charger\n");
-		return PTR_ERR(info->charger);
-	}
-
 	platform_set_drvdata(pdev, info);
 
 	/* Perform initial detection */
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Thierry Reding <treding@nvidia.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Paul Cercueil <paul@crapouillou.net>,
	Lee Jones <lee.jones@linaro.org>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>
Subject: [PATCH 1/3] usb: common: usb-conn-gpio: fix NULL pointer dereference of charger
Date: Wed, 19 May 2021 14:34:13 +0800	[thread overview]
Message-ID: <1621406055-18749-1-git-send-email-chunfeng.yun@mediatek.com> (raw)

When power on system with OTG cable, IDDIG's interrupt arises before
the charger registration, it will cause a NULL pointer dereference,
fix the issue by registering the power supply before requesting
IDDIG/VBUS irq.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/common/usb-conn-gpio.c | 44 ++++++++++++++++++------------
 1 file changed, 26 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
index 6c4e3a19f42c..c9545a4eff66 100644
--- a/drivers/usb/common/usb-conn-gpio.c
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -149,14 +149,32 @@ static int usb_charger_get_property(struct power_supply *psy,
 	return 0;
 }
 
-static int usb_conn_probe(struct platform_device *pdev)
+static int usb_conn_psy_register(struct usb_conn_info *info)
 {
-	struct device *dev = &pdev->dev;
-	struct power_supply_desc *desc;
-	struct usb_conn_info *info;
+	struct device *dev = info->dev;
+	struct power_supply_desc *desc = &info->desc;
 	struct power_supply_config cfg = {
 		.of_node = dev->of_node,
 	};
+
+	desc->name = "usb-charger";
+	desc->properties = usb_charger_properties;
+	desc->num_properties = ARRAY_SIZE(usb_charger_properties);
+	desc->get_property = usb_charger_get_property;
+	desc->type = POWER_SUPPLY_TYPE_USB;
+	cfg.drv_data = info;
+
+	info->charger = devm_power_supply_register(dev, desc, &cfg);
+	if (IS_ERR(info->charger))
+		dev_err(dev, "Unable to register charger\n");
+
+	return PTR_ERR_OR_ZERO(info->charger);
+}
+
+static int usb_conn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_conn_info *info;
 	bool need_vbus = true;
 	int ret = 0;
 
@@ -218,6 +236,10 @@ static int usb_conn_probe(struct platform_device *pdev)
 		return PTR_ERR(info->role_sw);
 	}
 
+	ret = usb_conn_psy_register(info);
+	if (ret)
+		goto put_role_sw;
+
 	if (info->id_gpiod) {
 		info->id_irq = gpiod_to_irq(info->id_gpiod);
 		if (info->id_irq < 0) {
@@ -252,20 +274,6 @@ static int usb_conn_probe(struct platform_device *pdev)
 		}
 	}
 
-	desc = &info->desc;
-	desc->name = "usb-charger";
-	desc->properties = usb_charger_properties;
-	desc->num_properties = ARRAY_SIZE(usb_charger_properties);
-	desc->get_property = usb_charger_get_property;
-	desc->type = POWER_SUPPLY_TYPE_USB;
-	cfg.drv_data = info;
-
-	info->charger = devm_power_supply_register(dev, desc, &cfg);
-	if (IS_ERR(info->charger)) {
-		dev_err(dev, "Unable to register charger\n");
-		return PTR_ERR(info->charger);
-	}
-
 	platform_set_drvdata(pdev, info);
 
 	/* Perform initial detection */
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Thierry Reding <treding@nvidia.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Paul Cercueil <paul@crapouillou.net>,
	Lee Jones <lee.jones@linaro.org>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>
Subject: [PATCH 1/3] usb: common: usb-conn-gpio: fix NULL pointer dereference of charger
Date: Wed, 19 May 2021 14:34:13 +0800	[thread overview]
Message-ID: <1621406055-18749-1-git-send-email-chunfeng.yun@mediatek.com> (raw)

When power on system with OTG cable, IDDIG's interrupt arises before
the charger registration, it will cause a NULL pointer dereference,
fix the issue by registering the power supply before requesting
IDDIG/VBUS irq.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/common/usb-conn-gpio.c | 44 ++++++++++++++++++------------
 1 file changed, 26 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
index 6c4e3a19f42c..c9545a4eff66 100644
--- a/drivers/usb/common/usb-conn-gpio.c
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -149,14 +149,32 @@ static int usb_charger_get_property(struct power_supply *psy,
 	return 0;
 }
 
-static int usb_conn_probe(struct platform_device *pdev)
+static int usb_conn_psy_register(struct usb_conn_info *info)
 {
-	struct device *dev = &pdev->dev;
-	struct power_supply_desc *desc;
-	struct usb_conn_info *info;
+	struct device *dev = info->dev;
+	struct power_supply_desc *desc = &info->desc;
 	struct power_supply_config cfg = {
 		.of_node = dev->of_node,
 	};
+
+	desc->name = "usb-charger";
+	desc->properties = usb_charger_properties;
+	desc->num_properties = ARRAY_SIZE(usb_charger_properties);
+	desc->get_property = usb_charger_get_property;
+	desc->type = POWER_SUPPLY_TYPE_USB;
+	cfg.drv_data = info;
+
+	info->charger = devm_power_supply_register(dev, desc, &cfg);
+	if (IS_ERR(info->charger))
+		dev_err(dev, "Unable to register charger\n");
+
+	return PTR_ERR_OR_ZERO(info->charger);
+}
+
+static int usb_conn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_conn_info *info;
 	bool need_vbus = true;
 	int ret = 0;
 
@@ -218,6 +236,10 @@ static int usb_conn_probe(struct platform_device *pdev)
 		return PTR_ERR(info->role_sw);
 	}
 
+	ret = usb_conn_psy_register(info);
+	if (ret)
+		goto put_role_sw;
+
 	if (info->id_gpiod) {
 		info->id_irq = gpiod_to_irq(info->id_gpiod);
 		if (info->id_irq < 0) {
@@ -252,20 +274,6 @@ static int usb_conn_probe(struct platform_device *pdev)
 		}
 	}
 
-	desc = &info->desc;
-	desc->name = "usb-charger";
-	desc->properties = usb_charger_properties;
-	desc->num_properties = ARRAY_SIZE(usb_charger_properties);
-	desc->get_property = usb_charger_get_property;
-	desc->type = POWER_SUPPLY_TYPE_USB;
-	cfg.drv_data = info;
-
-	info->charger = devm_power_supply_register(dev, desc, &cfg);
-	if (IS_ERR(info->charger)) {
-		dev_err(dev, "Unable to register charger\n");
-		return PTR_ERR(info->charger);
-	}
-
 	platform_set_drvdata(pdev, info);
 
 	/* Perform initial detection */
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-05-19  6:34 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-19  6:34 Chunfeng Yun [this message]
2021-05-19  6:34 ` [PATCH 1/3] usb: common: usb-conn-gpio: fix NULL pointer dereference of charger Chunfeng Yun
2021-05-19  6:34 ` Chunfeng Yun
2021-05-19  6:34 ` [PATCH 2/3] usb: common: usb-conn-gpio: use dev_err_probe() to print log Chunfeng Yun
2021-05-19  6:34   ` Chunfeng Yun
2021-05-19  6:34   ` Chunfeng Yun
2021-05-19  6:34 ` [PATCH 3/3] Revert "usb: common: usb-conn-gpio: Make VBUS supply optional" Chunfeng Yun
2021-05-19  6:34   ` Chunfeng Yun
2021-05-19  6:34   ` Chunfeng Yun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1621406055-18749-1-git-send-email-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=broonie@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=paul@crapouillou.net \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.