From: Stefan Wahren <stefan.wahren@i2se.com> To: Rob Herring <robh+dt@kernel.org>, Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Stefan Wahren <stefan.wahren@i2se.com>, Pavel Hofman <pavel.hofman@ivitera.com> Subject: [PATCH] Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size" Date: Sat, 29 May 2021 15:02:51 +0200 [thread overview] Message-ID: <1622293371-5997-1-git-send-email-stefan.wahren@i2se.com> (raw) This reverts commit 278407a53c3b33fb820332c4d39eb39316c3879a. The original change breaks USB config on Raspberry Pi Zero and Pi 4 B, because it exceeds the total fifo size of 4080. A naive attempt to reduce g-tx-fifo-size doesn't help on Raspberry Pi Zero. So better go back. Fixes: 278407a53c3b ("ARM: dts: bcm283x: increase dwc2's RX FIFO size") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Cc: Pavel Hofman <pavel.hofman@ivitera.com> --- arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 2 +- arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi index 20322de..e2fd961 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "otg"; - g-rx-fifo-size = <558>; + g-rx-fifo-size = <256>; g-np-tx-fifo-size = <32>; /* * According to dwc2 the sum of all device EP diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi index 1409d1b..0ff0e9e 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "peripheral"; - g-rx-fifo-size = <558>; + g-rx-fifo-size = <256>; g-np-tx-fifo-size = <32>; g-tx-fifo-size = <256 256 512 512 512 768 768>; }; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <stefan.wahren@i2se.com> To: Rob Herring <robh+dt@kernel.org>, Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Stefan Wahren <stefan.wahren@i2se.com>, Pavel Hofman <pavel.hofman@ivitera.com> Subject: [PATCH] Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size" Date: Sat, 29 May 2021 15:02:51 +0200 [thread overview] Message-ID: <1622293371-5997-1-git-send-email-stefan.wahren@i2se.com> (raw) This reverts commit 278407a53c3b33fb820332c4d39eb39316c3879a. The original change breaks USB config on Raspberry Pi Zero and Pi 4 B, because it exceeds the total fifo size of 4080. A naive attempt to reduce g-tx-fifo-size doesn't help on Raspberry Pi Zero. So better go back. Fixes: 278407a53c3b ("ARM: dts: bcm283x: increase dwc2's RX FIFO size") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Cc: Pavel Hofman <pavel.hofman@ivitera.com> --- arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 2 +- arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi index 20322de..e2fd961 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "otg"; - g-rx-fifo-size = <558>; + g-rx-fifo-size = <256>; g-np-tx-fifo-size = <32>; /* * According to dwc2 the sum of all device EP diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi index 1409d1b..0ff0e9e 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "peripheral"; - g-rx-fifo-size = <558>; + g-rx-fifo-size = <256>; g-np-tx-fifo-size = <32>; g-tx-fifo-size = <256 256 512 512 512 768 768>; }; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-05-29 13:03 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-29 13:02 Stefan Wahren [this message] 2021-05-29 13:02 ` [PATCH] Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size" Stefan Wahren 2021-06-08 10:06 ` nicolas saenz julienne 2021-06-08 10:06 ` nicolas saenz julienne
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1622293371-5997-1-git-send-email-stefan.wahren@i2se.com \ --to=stefan.wahren@i2se.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=nsaenz@kernel.org \ --cc=pavel.hofman@ivitera.com \ --cc=rjui@broadcom.com \ --cc=robh+dt@kernel.org \ --cc=sbranden@broadcom.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.