All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alain Volmat <alain.volmat@foss.st.com>
To: <broonie@kernel.org>, <amelie.delaunay@foss.st.com>
Cc: <mcoquelin.stm32@gmail.com>, <alexandre.torgue@foss.st.com>,
	<linux-spi@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <fabrice.gasnier@foss.st.com>,
	<alain.volmat@foss.st.com>
Subject: [PATCH v2 1/7] spi: stm32: fixes pm_runtime calls in probe/remove
Date: Wed, 7 Jul 2021 10:27:00 +0200	[thread overview]
Message-ID: <1625646426-5826-2-git-send-email-alain.volmat@foss.st.com> (raw)
In-Reply-To: <1625646426-5826-1-git-send-email-alain.volmat@foss.st.com>

Add pm_runtime calls in probe/probe error path and remove
in order to be consistent in all places in ordering and
ensure that pm_runtime is disabled prior to resources used
by the SPI controller.

This patch also fixes the 2 following warnings on driver remove:
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c

Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support")

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
 drivers/spi/spi-stm32.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 8ffcffbb8157..a92a28933edb 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1925,6 +1925,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
 		master->can_dma = stm32_spi_can_dma;
 
 	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
 	ret = spi_register_master(master);
@@ -1940,6 +1941,8 @@ static int stm32_spi_probe(struct platform_device *pdev)
 
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 err_dma_release:
 	if (spi->dma_tx)
 		dma_release_channel(spi->dma_tx);
@@ -1956,9 +1959,14 @@ static int stm32_spi_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct stm32_spi *spi = spi_master_get_devdata(master);
 
+	pm_runtime_get_sync(&pdev->dev);
+
 	spi_unregister_master(master);
 	spi->cfg->disable(spi);
 
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 	if (master->dma_tx)
 		dma_release_channel(master->dma_tx);
 	if (master->dma_rx)
@@ -1966,7 +1974,6 @@ static int stm32_spi_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(spi->clk);
 
-	pm_runtime_disable(&pdev->dev);
 
 	pinctrl_pm_select_sleep_state(&pdev->dev);
 
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Alain Volmat <alain.volmat@foss.st.com>
To: <broonie@kernel.org>, <amelie.delaunay@foss.st.com>
Cc: <mcoquelin.stm32@gmail.com>, <alexandre.torgue@foss.st.com>,
	<linux-spi@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <fabrice.gasnier@foss.st.com>,
	<alain.volmat@foss.st.com>
Subject: [PATCH v2 1/7] spi: stm32: fixes pm_runtime calls in probe/remove
Date: Wed, 7 Jul 2021 10:27:00 +0200	[thread overview]
Message-ID: <1625646426-5826-2-git-send-email-alain.volmat@foss.st.com> (raw)
In-Reply-To: <1625646426-5826-1-git-send-email-alain.volmat@foss.st.com>

Add pm_runtime calls in probe/probe error path and remove
in order to be consistent in all places in ordering and
ensure that pm_runtime is disabled prior to resources used
by the SPI controller.

This patch also fixes the 2 following warnings on driver remove:
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c

Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support")

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
 drivers/spi/spi-stm32.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 8ffcffbb8157..a92a28933edb 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1925,6 +1925,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
 		master->can_dma = stm32_spi_can_dma;
 
 	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
 	ret = spi_register_master(master);
@@ -1940,6 +1941,8 @@ static int stm32_spi_probe(struct platform_device *pdev)
 
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 err_dma_release:
 	if (spi->dma_tx)
 		dma_release_channel(spi->dma_tx);
@@ -1956,9 +1959,14 @@ static int stm32_spi_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct stm32_spi *spi = spi_master_get_devdata(master);
 
+	pm_runtime_get_sync(&pdev->dev);
+
 	spi_unregister_master(master);
 	spi->cfg->disable(spi);
 
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 	if (master->dma_tx)
 		dma_release_channel(master->dma_tx);
 	if (master->dma_rx)
@@ -1966,7 +1974,6 @@ static int stm32_spi_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(spi->clk);
 
-	pm_runtime_disable(&pdev->dev);
 
 	pinctrl_pm_select_sleep_state(&pdev->dev);
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-07-07  8:28 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-07  8:26 [PATCH v2 0/7] spi: stm32: various fixes & cleanup Alain Volmat
2021-07-07  8:26 ` Alain Volmat
2021-07-07  8:27 ` Alain Volmat [this message]
2021-07-07  8:27   ` [PATCH v2 1/7] spi: stm32: fixes pm_runtime calls in probe/remove Alain Volmat
2021-07-07  8:27 ` [PATCH v2 2/7] spi: stm32: enable pm_runtime autosuspend Alain Volmat
2021-07-07  8:27   ` Alain Volmat
2021-07-07  8:27 ` [PATCH v2 3/7] spi: stm32h7: fix full duplex irq handler handling Alain Volmat
2021-07-07  8:27   ` Alain Volmat
2021-07-07  8:27 ` [PATCH v2 4/7] spi: stm32: Revert "properly handle 0 byte transfer" Alain Volmat
2021-07-07  8:27   ` Alain Volmat
2021-07-07  8:27 ` [PATCH v2 5/7] spi: stm32h7: rework rx fifo read function Alain Volmat
2021-07-07  8:27   ` Alain Volmat
2021-07-07  8:27 ` [PATCH v2 6/7] spi: stm32h7: don't wait for EOT and flush fifo on disable Alain Volmat
2021-07-07  8:27   ` Alain Volmat
2021-07-07  8:27 ` [PATCH v2 7/7] spi: stm32: finalize message either on dma callback or EOT Alain Volmat
2021-07-07  8:27   ` Alain Volmat
2021-07-12 10:45 ` (subset) [PATCH v2 0/7] spi: stm32: various fixes & cleanup Mark Brown
2021-07-12 10:45   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1625646426-5826-2-git-send-email-alain.volmat@foss.st.com \
    --to=alain.volmat@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=amelie.delaunay@foss.st.com \
    --cc=broonie@kernel.org \
    --cc=fabrice.gasnier@foss.st.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.