All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	srinivas.kandagatla@linaro.org, robh+dt@kernel.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, rbokka@codeaurora.org,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH 2/3] nvmem: qfprom: sc7280: Handle the additional power-domains vote
Date: Thu, 22 Jul 2021 10:58:35 +0530	[thread overview]
Message-ID: <1626931716-10591-3-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1626931716-10591-1-git-send-email-rnayak@codeaurora.org>

On sc7280, to reliably blow fuses, we need an additional vote
on max performance state of 'MX' power-domain.
Add support for power-domain performance state voting in the
driver.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 drivers/nvmem/qfprom.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index 81fbad5..4d0a576 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -12,6 +12,8 @@
 #include <linux/mod_devicetable.h>
 #include <linux/nvmem-provider.h>
 #include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
 
@@ -149,6 +151,11 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
 	if (ret)
 		dev_warn(priv->dev, "Failed to set 0 voltage (ignoring)\n");
 
+	if (priv->dev->pm_domain) {
+		dev_pm_genpd_set_performance_state(priv->dev, 0);
+		pm_runtime_put(priv->dev);
+	}
+
 	ret = regulator_disable(priv->vcc);
 	if (ret)
 		dev_warn(priv->dev, "Failed to disable regulator (ignoring)\n");
@@ -212,6 +219,16 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
 		goto err_clk_rate_set;
 	}
 
+	if (priv->dev->pm_domain) {
+		ret = pm_runtime_get_sync(priv->dev);
+		if (ret < 0) {
+			pm_runtime_put_noidle(priv->dev);
+			dev_err(priv->dev, "Failed to enable power-domain\n");
+			goto err_reg_enable;
+		}
+		dev_pm_genpd_set_performance_state(priv->dev, INT_MAX);
+	}
+
 	old->timer_val = readl(priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
 	old->accel_val = readl(priv->qfpconf + QFPROM_ACCEL_OFFSET);
 	writel(priv->soc_data->qfprom_blow_timer_value,
@@ -221,6 +238,8 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
 
 	return 0;
 
+err_reg_enable:
+	regulator_disable(priv->vcc);
 err_clk_rate_set:
 	clk_set_rate(priv->secclk, old->clk_rate);
 err_clk_prepared:
@@ -420,6 +439,9 @@ static int qfprom_probe(struct platform_device *pdev)
 			econfig.reg_write = qfprom_reg_write;
 	}
 
+	if (dev->pm_domain)
+		pm_runtime_enable(dev);
+
 	nvmem = devm_nvmem_register(dev, &econfig);
 
 	return PTR_ERR_OR_ZERO(nvmem);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


  parent reply	other threads:[~2021-07-22  5:29 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-22  5:28 [PATCH 0/3] nvmem: qfprom: Add binding updates and power-domain handling Rajendra Nayak
2021-07-22  5:28 ` [PATCH 1/3] dt-bindings: nvmem: qfprom: Add optional power-domains property Rajendra Nayak
2021-07-22  5:28 ` Rajendra Nayak [this message]
2021-07-23 16:43   ` [PATCH 2/3] nvmem: qfprom: sc7280: Handle the additional power-domains vote Doug Anderson
2021-07-27 12:20     ` Rajendra Nayak
2021-07-22  5:28 ` [PATCH 3/3] arm64: dts: qcom: sc7280: Add qfprom node Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1626931716-10591-3-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rbokka@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.