From: Stefan Wahren <stefan.wahren@i2se.com> To: Rob Herring <robh+dt@kernel.org>, Nicolas Saenz Julienne <nsaenz@kernel.org>, Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com, Maxime Ripard <maxime@cerno.tech>, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>, Stefan Wahren <stefan.wahren@i2se.com> Subject: [PATCH] ARM: dts: bcm283x: Fix VEC address for BCM2711 Date: Thu, 22 Jul 2021 21:02:08 +0200 [thread overview] Message-ID: <1626980528-3835-1-git-send-email-stefan.wahren@i2se.com> (raw) From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> The VEC has a different address (0x7ec13000) on the BCM2711 (used in e.g. Raspberry Pi 4) compared to BCM283x (e.g. Pi 3 and earlier). This was erroneously not taken account for. Definition of the VEC in the devicetrees had to be moved from bcm283x.dtsi to bcm2711.dtsi and bcm2835-common.dtsi to allow for this differentiation. Fixes: 7894bdc6228f ("ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible") Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- arch/arm/boot/dts/bcm2711.dtsi | 8 ++++++++ arch/arm/boot/dts/bcm2835-common.dtsi | 8 ++++++++ arch/arm/boot/dts/bcm283x.dtsi | 8 -------- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index b8a4096..734342c 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -300,6 +300,14 @@ status = "disabled"; }; + vec: vec@7ec13000 { + compatible = "brcm,bcm2711-vec"; + reg = <0x7ec13000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + dvp: clock@7ef00000 { compatible = "brcm,brcm2711-dvp"; reg = <0x7ef00000 0x10>; diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi index 4119271..c25e797 100644 --- a/arch/arm/boot/dts/bcm2835-common.dtsi +++ b/arch/arm/boot/dts/bcm2835-common.dtsi @@ -106,6 +106,14 @@ status = "okay"; }; + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + status = "disabled"; + }; + pixelvalve@7e807000 { compatible = "brcm,bcm2835-pixelvalve2"; reg = <0x7e807000 0x100>; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 0f3be55..a3e06b6 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -464,14 +464,6 @@ status = "disabled"; }; - vec: vec@7e806000 { - compatible = "brcm,bcm2835-vec"; - reg = <0x7e806000 0x1000>; - clocks = <&clocks BCM2835_CLOCK_VEC>; - interrupts = <2 27>; - status = "disabled"; - }; - usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <stefan.wahren@i2se.com> To: Rob Herring <robh+dt@kernel.org>, Nicolas Saenz Julienne <nsaenz@kernel.org>, Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com, Maxime Ripard <maxime@cerno.tech>, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>, Stefan Wahren <stefan.wahren@i2se.com> Subject: [PATCH] ARM: dts: bcm283x: Fix VEC address for BCM2711 Date: Thu, 22 Jul 2021 21:02:08 +0200 [thread overview] Message-ID: <1626980528-3835-1-git-send-email-stefan.wahren@i2se.com> (raw) From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> The VEC has a different address (0x7ec13000) on the BCM2711 (used in e.g. Raspberry Pi 4) compared to BCM283x (e.g. Pi 3 and earlier). This was erroneously not taken account for. Definition of the VEC in the devicetrees had to be moved from bcm283x.dtsi to bcm2711.dtsi and bcm2835-common.dtsi to allow for this differentiation. Fixes: 7894bdc6228f ("ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible") Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- arch/arm/boot/dts/bcm2711.dtsi | 8 ++++++++ arch/arm/boot/dts/bcm2835-common.dtsi | 8 ++++++++ arch/arm/boot/dts/bcm283x.dtsi | 8 -------- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index b8a4096..734342c 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -300,6 +300,14 @@ status = "disabled"; }; + vec: vec@7ec13000 { + compatible = "brcm,bcm2711-vec"; + reg = <0x7ec13000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + dvp: clock@7ef00000 { compatible = "brcm,brcm2711-dvp"; reg = <0x7ef00000 0x10>; diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi index 4119271..c25e797 100644 --- a/arch/arm/boot/dts/bcm2835-common.dtsi +++ b/arch/arm/boot/dts/bcm2835-common.dtsi @@ -106,6 +106,14 @@ status = "okay"; }; + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + status = "disabled"; + }; + pixelvalve@7e807000 { compatible = "brcm,bcm2835-pixelvalve2"; reg = <0x7e807000 0x100>; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 0f3be55..a3e06b6 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -464,14 +464,6 @@ status = "disabled"; }; - vec: vec@7e806000 { - compatible = "brcm,bcm2835-vec"; - reg = <0x7e806000 0x1000>; - clocks = <&clocks BCM2835_CLOCK_VEC>; - interrupts = <2 27>; - status = "disabled"; - }; - usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-07-22 19:04 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-22 19:02 Stefan Wahren [this message] 2021-07-22 19:02 ` [PATCH] ARM: dts: bcm283x: Fix VEC address for BCM2711 Stefan Wahren 2021-07-26 8:30 ` nicolas saenz julienne 2021-07-26 8:30 ` nicolas saenz julienne
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1626980528-3835-1-git-send-email-stefan.wahren@i2se.com \ --to=stefan.wahren@i2se.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=kfyatek+publicgit@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=maxime@cerno.tech \ --cc=nsaenz@kernel.org \ --cc=rjui@broadcom.com \ --cc=robh+dt@kernel.org \ --cc=sbranden@broadcom.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.