[PATCH v3 3/4] nvmem: qfprom: sc7280: Handle the additional power-domains vote

[Rajendra Nayak <rnayak@codeaurora.org>]

On sc7280, to reliably blow fuses, we need an additional vote
on max performance state of 'MX' power-domain.
Add support for power-domain performance state voting in the
driver.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
 drivers/nvmem/qfprom.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index b0ca4c6..c500d62 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -12,6 +12,8 @@
 #include <linux/mod_devicetable.h>
 #include <linux/nvmem-provider.h>
 #include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
 
@@ -142,6 +144,9 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
 	writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
 	writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
 
+	dev_pm_genpd_set_performance_state(priv->dev, 0);
+	pm_runtime_put(priv->dev);
+
 	/*
 	 * This may be a shared rail and may be able to run at a lower rate
 	 * when we're not blowing fuses.  At the moment, the regulator framework
@@ -212,6 +217,14 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
 		goto err_clk_rate_set;
 	}
 
+	ret = pm_runtime_get_sync(priv->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->dev);
+		dev_err(priv->dev, "Failed to enable power-domain\n");
+		goto err_reg_enable;
+	}
+	dev_pm_genpd_set_performance_state(priv->dev, INT_MAX);
+
 	old->timer_val = readl(priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
 	old->accel_val = readl(priv->qfpconf + QFPROM_ACCEL_OFFSET);
 	writel(priv->soc_data->qfprom_blow_timer_value,
@@ -221,6 +234,8 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
 
 	return 0;
 
+err_reg_enable:
+	regulator_disable(priv->vcc);
 err_clk_rate_set:
 	clk_set_rate(priv->secclk, old->clk_rate);
 err_clk_prepared:
@@ -320,6 +335,11 @@ static int qfprom_reg_read(void *context,
 	return 0;
 }
 
+static void qfprom_runtime_disable(void *data)
+{
+	pm_runtime_disable(data);
+}
+
 static const struct qfprom_soc_data qfprom_7_8_data = {
 	.accel_value = 0xD10,
 	.qfprom_blow_timer_value = 25,
@@ -420,6 +440,11 @@ static int qfprom_probe(struct platform_device *pdev)
 			econfig.reg_write = qfprom_reg_write;
 	}
 
+	pm_runtime_enable(dev);
+	ret = devm_add_action_or_reset(dev, qfprom_runtime_disable, dev);
+	if (ret)
+		return ret;
+
 	nvmem = devm_nvmem_register(dev, &econfig);
 
 	return PTR_ERR_OR_ZERO(nvmem);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation